Film-forming characteristics and thermal stability of low viscosity benzoxazines derived from melamine

A novel class of low-viscosity benzoxazines has been synthesized from melamine and formaldehyde with phenol or bisphenol A. The striking feature of the class of benzoxazines is the subtle combination of their inherently low viscosity at room temperature, good film-forming characteristics and high chemical and thermal stability mainly due to the introduction of melamine into the network of the polymers. The structure of the benzoxazines has been confirmed by proton nuclear magnetic resonance spectroscopy and fourier transform infrared spectroscopy. Thermal properties of polybenzoxazine have been studied by differential scanning calorimetry, dynamic mechanical analysis and thermogravimetric analysis. Transparent polybenzoxazine films were easily obtained under solvent-free conditions, exhibiting significantly improved toughness compared to the conventional polybenzoxazines. Our research may open a new path for overcoming the present drawbacks of polybenzoxazines such as high brittleness, the difficulties in preparing films and poor processibility via tailoring the structures and properties of amine in the benzoxazines.     

Cluster synchronization in nonlinearly coupled delayed networks of non-identical dynamic systems

In the real world, many networks show community structure, i.e., clusters of nodes, which have a high density of links within the same cluster but a lower density of links between different clusters. In this paper, nonlinearly coupled networks with community structure and non-identical nodes and with time-varying delay are considered. By applying pinning control to a fraction of network nodes, and using a suitable Lyapunov function, we obtain some new and useful synchronization criteria, which guarantee that various clusters are synchronized independently. An example is presented to show the application of the criteria obtained in this paper.     

Thermal degradation kinetics and heat properties of cellulosic cigarette paper: influence of potassium carboxylate as combustion improver

Accurate determination of the thermal properties of cellulose is of particular significance in studying the mechanism of cellulosic cigarette paper combustion. This paper probes into the influence of four kinds of potassium carboxylates on the thermal degradation kinetics and the heat properties of cigarette paper through simultaneous thermogravimetric analysis (TGA) coupled with differential scanning calorimetry (DSC) measurement under air atmosphere. Reduced mass loss and mass loss rate, and increased solid residue for samples containing four potassium salts implied that potassium carboxylates may retard the formation of levoglucosan and volatiles by inhibiting the depolymerization reaction and simultaneously accelerate char formation by catalyzing the dehydration reaction. Kinetic parameters were analyzed based on three non-isothermal models available in literature. The results indicated that three modeling methods exhibit good consistency. A global activation energy range of 106–155 kJ mol^?1 was proposed for cigarette paper with potassium carboxylates. The four potassium salts studied considerably reduced the activation energy in the following descending order: potassium 1,2,3,4-butane tetracarboxylate (PBTCA) > citrate > gluconate > ascorbate. The heat properties of cigarette paper were also determined by integrating the DSC curves. The results demonstrated that both cellulose degradation and char oxidation have strong exothermic peaks. Cigarette paper samples with potassium salts have lower exothermic cellulose degradation process and higher exothermic char oxidation process, which were further confirmed by greater differences as the amounts of salt citrate or PBTCA increased.     

Effects of monomer structure on the morphology of polymer networks and the electro-optical properties of polymer-dispersed liquid crystal films

Polymer-dispersed liquid crystal (PDLC) films were prepared by photochemical polymerisation with a series of (meth)acrylate monomers. The effects of monomer structure on the morphology of polymer networks in the PDLC films were studied. The acrylate monomers without sidegroup chain formed uniform polymer networks. The methacrylate monomers with methyl as their sidegroup chains formed lace-like networks. The size of the LC droplets increased with increasing the length of the flexible chain of both methacrylate and acrylate monomers. Meanwhile, the effects of the morphology of the polymer network on the electro-optical properties of PDLC films were also investigated.     

Ultrafast Delamination of Graphite into High-Quality Graphene Using Alternating Currents

To bridge the gap between laboratory-scale studies and commercial applications, mass production of high quality graphene is essential. A scalable exfoliation strategy towards the production of graphene sheets is presented that has excellent yield (ca. 75 %, 1–3 layers), low defect density (a C/O ratio of 21.2), great solution-processability, and outstanding electronic properties (a hole mobility of 430 cm² V⁻¹ s⁻¹). By applying alternating currents, dual exfoliation at both graphite electrodes enables a high production rate exceeding 20 g h⁻¹ in laboratory tests. As a cathode material for lithium storage, graphene-wrapped LiFePO₄ particles deliver a high capacity of 167 mAh g⁻¹ at 1 C rate after 500 cycles.     

Tackling indeterminacy in overlapping generations models

Overlapping generations models may have a continuum of equilibria. Previous studies have been largely confined to the local analysis that linearizes the model around the steady state. However, what is true of the linearized system only applies for an unknown-sized open neighborhood of the steady state. In this paper I develop a method to diagnose the indeterminacy in overlapping generations models by computing the set of all equilibria. I also provide a procedure to simulate the economy with indeterminate equilibrium.     

Investigation of locally resonant absorption and factors affecting the absorption band of a phononic glass

We experimentally and theoretically investigated the mechanisms of acoustic absorption in phononic glass to optimize its properties. First, we experimentally studied its locally resonant absorption mechanism. From these results, we attributed its strong sound attenuation to its locally resonant units and its broadband absorption to its networked structure. These experiments also indicated that the porosity and thickness of the phononic glass must be tuned to achieve the best sound absorption at given frequencies. Then, using lumped-mass methods, we studied how the absorption bandgaps of the phononic glass were affected by various factors, including the porosity and the properties of the coating materials. These calculations gave optimal ranges for selecting the porosity, modulus of the coating material, and ratio of the compliant coating to the stiff matrix to achieve absorption bandgaps in the range of 6–30 kHz. This paper provides guidelines for designing phononic glasses with proper structures and component materials to work in specific frequency ranges.     

Preparation and characterization of vanadium(IV) oxide supported on SBA-15 and its catalytic performance in benzene hydroxylation to phenol using molecular oxygen

Preparation of dispersed transition metal oxides catalyst with low oxidation state still remains a challenging task in heterogeneous catalysis.In this study,vanadium oxides supported on zeolite SBA-15 have been prepared under hydrothermal condition using V 2 O 5 and oxalic acid as sources of vanadium and reductant,respectively.The structures of samples,especially the oxidation state of vanadium,and the surface distribution of vanadium oxide species,have been thoroughly characterized using various techniques,including N 2-physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),UV-visible spectra(UV-Vis) and UV-visible-near infrared spectra(UV-Vis-NIR).It is found that the majority of supported vanadium was in the form of vanadium(IV) oxide species with the low valence of vanadium.By adjusting hydrothermal treatment time,the surface distribution of vanadium(IV) oxide species can be tuned from vanadium(IV) oxide cluster to crystallites.These materials have been tested in the hydroxylation of benzene to phenol in liquid-phase with molecular oxygen in the absence of reductant.The catalyst exhibits high selectivity for phenol(61%) at benzene conversion of 4.6%,which is a relatively good result in comparison with other studies employing molecular oxygen as the oxidant.     

Synthesis of TiO2 based on hydrothermal methods using elevated pressures and microwave conditions

Titanium dioxide (TiO₂), especially in its anatase form, is an effective photocatalyst under ultraviolet (UV) light. The particle size of TiO₂ is a critical factor to determine its photoactivity based on its quantum effectiveness under light irradiations. Thus, nanocrystalline TiO₂ has been widely accepted to significantly enhance this effect. The sol–gel method is generally used to synthesize the anatase form of nanocrystalline TiO₂. In this study, we expanded the synthesis method of TiO₂ to high pressures under direct heating (hydrothermal method) and indirect heating (microwave-assisted method). It was found that pH value is one of the major factors to control nano-sizes of TiO₂ particles, and the neutral condition in all methods is preferable for controlling the sizes of the prepared TiO₂ particles. The microwave-assisted method further improves quality of synthesized nano-size TiO₂ below 10 nm. These results have been confirmed by both the direct size measurement using TEM images and indirect determination using XRD peaks. The collected samples are further analyzed using UV–Vis spectroscopy to identify the particle size-dependent photoreactivity and to confirm the effectiveness of microwave-assisting under neutral conditions. DSC is also a powerful tool to identify the crystalline transition of TiO₂.