Optical parametric chirped pulse amplification based on photonic crystal fibre

A compact two-stage optical parametric chirped pulse amplifier based on photonic crystal fibre is demonstrated.A 1064-nm soliton pulse is obtained in a home-made photonic crystal fibre (PCF) with femtosecond pulse pumping and then amplified to 2 mJ in an Nd:YAG regenerative amplifier.After the amplified pulses pass through the LBO crystal,the 532-nm double-frequency light with an energy of 0.8 mJ and a duration of over 100 ps at 10-Hz repetition rate is generated as a pump source in the following two-stage optical parametric amplification (OPA).The 850-nm chirped signal light gain from the stretcher is 1.5×10 4 in the first-stage OPA while it is 120 in the second-stage OPA.The total signal gain of optical parametric chirped pulse amplification (OPCPA) can reach 1.8×10 6.     

Measurement of the wrong-sign decays D0 --> K+ pi- pi0 and D0 --> K+ pi- pi+ pi-, and search for CP violation

Using 281 fb-1 of data from the Belle experiment recorded at or near the (4S) resonance, we have measured the rates of the "wrong-sign" decays D0 --> K+ pi- pi0 and D0 --> K+ pi- pi+ pi- relative to those of the Cabibbo-favored decays D0 --> K- pi+ pi0 and D0 --> K- pi+ pi+ pi-. These wrong-sign decays proceed via a doubly Cabibbo-suppressed amplitude or via D0-D0 mixing; the latter has not yet been observed. We obtain R(WS)(K pi pi0) = [0.229 +/- 0.015(stat)(+0.013)(-0.009)(syst)]% and R(WS)(K3pi) = [0.320 +/- 0.018(stat)(+0.018)(0.013)(syst)]%. The CP asymmetries are measured to be -0.006 +/- 0.053 and -0.018 +/- 0.044 for the K+ pi- pi0 and K+ pi- pi+ pi- final states, respectively.     

On the improvement of signal repeatability in laser-induced air plasmas

The relatively low repeatability of laser-induced breakdown spectroscopy (LIBS) severely hinders its wide commercialization. In the present work, we investigate the optimization of LIBS system for repeatability improvement for both signal generation (plasma evolution) and signal collection. Timeintegrated spectra and images were obtained under different laser energies and focal lengths to investigate the optimum configuration for stable plasmas and repeatable signals. Using our experimental setup, the optimum conditions were found to be a laser energy of 250 mJ and a focus length of 100 mm. A stable and homogeneous plasma with the largest hot core area in the optimum condition yielded the most stable LIBS signal. Time-resolved images showed that the rebounding processes through the air plasma evolution caused the relative standard deviation (RSD) to increase with laser energies of > 250 mJ. In addition, the emission collection was improved by using a concave spherical mirror. The line intensities doubled as their RSDs decreased by approximately 25%. When the signal generation and collection were optimized simultaneously, the pulse-to-pulse RSDs were reduced to approximately 3% for O(I), N(I), and H(I) lines, which are better than the RSDs reported for solid samples and showed great potential for LIBS quantitative analysis by gasifying the solid or liquid samples.     

Observation of B0-->pi0pi0

We report the observation of the decay B0-->pi(0)pi(0), using a 253 fb(-1) data sample collected at the Upsilon(4S) resonance with the Belle detector at the KEKB e(+)e(-) collider. The measured branching fraction is B(B0-->pi(0)pi(0))=(2.3(+0.4+0.2)(-0.5-0.3))x10(-6), with a significance of 5.8 standard deviations including systematic uncertainties. We also make a measurement of the direct CP violating asymmetry in this mode.     

Periodic solutions of a periodic stochastic human immunodeficiency virus model with distributed delay and cytotoxic T lymphocytes immune response

In this paper, a periodic stochastic human immunodeficiency virus (HIV) model with distributed delay and cytotoxic T lymphocytes (CTL) immune response is investigated. First, by It $ô$'s formula, we show that the solution with any positive initial value is global and positive. Then, by the stochastic comparison theorem, we obtain the sufficient conditions guaranteeing the existence and global attractivity of infection-free periodic solution. Furthermore, we discuss the existence of the infective periodic solution by Has'minskii theory. Finally, numerical examples are given to illustrate the results.     

Intracavity frequency doubling of an active Q-switched Nd:YAG laser with 2.25 W output power at 473 nm

An active Q-switched diode-end-pumped Nd:YAG laser is reported with 2.9 W output power on the ⁴F_3/2 → ⁴I_9/2 transitions at a pump power of 24 W. With intracavity frequency doubling using a 20-mm-long LBO, a maximum blue output power of 2.25 W is achieved at a repetition rate of 23 kHz. The conversion efficiency from the corresponding Q-switched fundamental output to blue output is 96%. The peak power of the Q-switched blue pulse is up to 610 W with 160 ns pulse width. The fluctuation of the blue output power is less than 4.0% at the maximum output power.     

The coexistence of TE-TM surface waves in uniaxially anisotropic left-handed materials

We investigate theoretically the characteristics of surface waves in uniaxially anisotropic left-handed materials. The constraints for the existence of TE and TM polarized surface waves in uniaxially anisotropic left-handed materials are identified. We discuss mainly whether TE and TM polarized surface modes may coexist in the same frequency domain at the interface between one isotropic regular medium and another uniaxially anisotropic left-handed medium. It is shown that the answer to the coexistence of TE and TM surface modes is really positive. The Poynting vector and the density of energy associated with surface modes are calculated. Depending on the system parameters either TE or TM surface modes has the time averaged Poynting vector directed opposite or same to the mode phase velocity. In the presence of anisotropy, negative refraction does not need to be left-handed. We show that the characteristics of surface waves in uniaxially anisotropic left-handed media are significantly different from that in isotropic left-handed media.     

Adsorption and manipulation of carbon onions on highly oriented pyrolytic graphite studied with atomic force microscopy

Carbon onions produced by DC arc discharge method were deposited on highly oriented pyrolytic graphite (HOPG) surface and their adsorption and manipulation was studied using an atomic force microscopy (AFM). Well-dispersed adsorption of carbon onions on HOPG surface was obtained and aggregations of onions were not observed. The van der Waals interaction between the onion and HOPG surface and that between two onions, were calculated and discussed using Hamaker's theory. The manipulation of adsorbed onions on HOPG surface was realized using the AFM in both the raster mode and the vector mode. The controllability and precision of two manipulation modes were compared and the vector mode manipulation was found superior, and is a useful technique for the construction of nano-scale devices based on carbon onions.     

In vitro and in vivo comparative study of the phototherapy anticancer activity of hyaluronic acid-modified single-walled carbon nanotubes,graphene oxide,and fullerene

In this work, carbon nanomaterials, single-walled carbon nanotubes (SWNT), graphene oxide (GO), and fullerene (C60) were modified by hyaluronic acid (HA) to obtain water-soluble and biocompatible nanomaterials with high tumor-targeting capacity and then the comparative study of these hyaluronic acid-modified carbon nanomaterials was made in vitro and in vivo. The conjugates of hyaluronic acid and carbon nanomaterials, namely, HA-SWNT, HA-GO, HA-C60, were confirmed by UV/Vis spectrum, Fourier transform infrared spectroscopy (FTIR), and a transmission electron microscope (TEM). After HA modification, the sizes of HA-SWNT, HA-GO, and HA-C60 were in a range of 70 to 300 nm, and all the three HA-modified materials were at negative potential, demonstrating that HA modification was in favor of extravasation of carbon materials into a tumor site due to enhanced permeability and retention effect of tumor. Photothermal conversion in vitro test demonstrated excellent photothermal sensitivity of HA-SWNT and HA-GO. But the reactive oxygen yield of HA-C60 was the highest compared with the others under visible light irradiation, which proved the good photodynamic therapy effect of HA-C60. In addition, cytotoxicity experiments exhibited that the inhibitory efficacy of HA-SWNT was the lowest, the second was HA-C60, and the highest was HA-GO, which was consistent with the uptake degree of them. While under the laser irradiation, the cell inhibition of the HA-SWNT was the highest, the second was HA-GO, and the last was HA-C60. In vivo evaluation of the three targeting carbon nanomaterials was consistent with the cytotoxicity assay results. Taken together, the results demonstrated that HA-SWNT and HA-GO were suited for photothermal therapy (PTT) agents for their good photothermal property, while HA-C60 was used as a kind of photodynamic therapy (PDT) agent for its photodynamic effect.     

Hydrothermal synthesis of graphene oxide/multiwalled carbon nanotube/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> ternary nanocomposite for removal of Cu (II) and methylene blue

In this work, highly activated graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite adsorbent was prepared from a simple hydrothermal route by using ferrous sulfate as precursor. For this purpose, the graphene oxide/multiwalled carbon nanotube architectures were formed through the π-π attractions between them, followed by attaching Fe₃O₄ nanoparticles onto their surface. The structure and composition of as-prepared ternary nanocomposite were characterized by XRD, FTIR, XPS, SEM, TEM, Raman, TGA, and BET. It was found that the resultant porous graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite with large surface area could effectively prevent the π-π stacking interactions between graphene oxide nanosheets and greatly improve sorption sites on the surfaces. Thus, owing to the unique ternary nanocomposite architecture and synergistic effect among various components, as-prepared ternary nanocomposite exhibited high separation efficiency when they were used to remove the Cu (II) and methylene blue from aqueous solutions. Furthermore, the adsorption isotherms of ternary nanocomposite structures for Cu (II) and methylene blue removal fitted the Langmuir isotherm model. This work demonstrated that the graphene oxide/multiwalled carbon nanotube/Fe₃O₄ ternary nanocomposite was promising as an efficient adsorbent for heavy metal ions and organic dye removal from wastewater in low concentration.