Evaluation of the contribution to hydration of nonelectrolytes from the hydrophobic effect

A new method was suggested for estimating the hydrophobic effect of contributions to the Gibbs energies and enthalpies of hydration of hydrocarbons, inorganic gases and rare gases. In accordance with this method the hydrophobic effect contribution to the Gibbs energy was evaluated from the difference between the hydration Gibbs energy of a solute and the non hydrophobic contribution. To estimate the latter value, the known dependence connecting the Gibbs energies of solvation of a solute in a number of aprotic solvents to the Hildebrand solubility parameter for these solvents was used. The non hydrophobic contribution to the Gibbs energy of hydration was calculated for various solutes from such dependences extended to water as solvent. The Hildebrand solubility parameter for water used in the calculation was corrected for the effect of association through hydrogen bonding. This correction was made by subtraction of the water self-association enthalpy from the enthalpy of vaporization of water. The evaluated Gibbs energies of the hydrophobic effect are positive for saturated hydrocarbons, inorganic gases and rare gases and linearly depend on the solute molecular refraction. The hydrophobic contribution to the hydration enthalpies of the solutes was calculated in the same manner as was made to calculate the hydrophobic contribution to Gibbs energies of hydration. Enthalpies of the hydrophobic effect for the solutes under study are negative.     

Characterization of a β-glucanase produced by Rhizopus microsporus var. microsporus, and its potential for application in the brewing industry

Background  

In the barley malting process, partial hydrolysis of β-glucans begins with seed germination. However, the endogenous 1,3-1,4-β-glucanases are heat inactivated, and the remaining high molecular weight β-glucans may cause severe problems such as increased brewer mash viscosity and turbidity. Increased viscosity impairs pumping and filtration, resulting in lower efficiency, reduced yields of extracts, and lower filtration rates, as well as the appearance of gelatinous precipitates in the finished beer. Therefore, the use of exogenous β-glucanases to reduce the β-glucans already present in the malt barley is highly desirable.     

Chromatographic performance of monolithic and particulate stationary phases. Hydrodynamics and adsorption capacity

Monolithic chromatographic support structures offer, as compared to the conventional particulate materials, a unique combination of high bed permeability, optimized solute transport to and from the active surface sites and a high loading capacity by the introduction of hierarchical order in the interconnected pore network and the possibility to independently manipulate the contributing sets of pores. While basic principles governing flow resistance, axial dispersion and adsorption capacity are remaining identical, and a similarity to particulate systems can be well recognized on that basis, a direct comparison of sphere geometry with monolithic structures is less obvious due, not least, to the complex shape of theskeleton domain. We present here a simple, widely applicable, phenomenological approach for treating single-phase incompressible flow through structures having a continuous, rigid solid phase. It relies on the determination of equivalent particle (sphere) dimensions which characterize the corresponding behaviour in a particulate, i.e. discontinuous bed. Equivalence is then obtained by dimensionless scaling of macroscopic fluid dynamical behaviour, hydraulic permeability and hydrodynamic dispersion in both types of materials, without needing a direct geometrical translation of their constituent units. Differences in adsorption capacity between particulate and monolithic stationary phases show that the silica-based monoliths with a bimodal pore size distribution provide, due to the high total porosity of the material of more than 90%, comparable maximum loading capacities with respect to random-close packings of completely porous spheres.     

Catalytic asymmetric carbohydroxylation of alkenes by a tandem diboration/Suzuki cross-coupling/oxidation reaction

[reaction: see text] Chiral nonsymmetric 1,2-diboron adducts are generated by catalytic enantioselective diboration. Oxidation of these adducts provides 1,2-diols in good yield. Alternatively, 1,2-diboron compounds may be reacted, in situ, with aryl halides wherein the less hindered C-B bond participates in cross-coupling. The remaining C-B bond is then oxidized in the reaction workup thereby allowing for net asymmetric carbohydroxylation of alkenes in a tandem one-pot diboration/Suzuki coupling/oxidation sequence.     

Stereochemical resolution of enantiomeric 2-aryl propionic acid non-steroidal anti-inflammatory drugs on a human serum albumin based high-performance liquid chromatographic chiral stationary phase

Summary The native enantioselectivity in binding of human serum albumin (HSA) towards 2-aryl propionic acid non-steroidal anti-inflammatory drugs (2-APA-NSAIDs, the profens) was found to be preserved when the protein was immobilized within a commercially available diol high-performance liquid chromatographic column. High capacity factors were obtained, reflecting the previously observed extensive binding of the 2-APA-NSAIDs to free HSA. The capacity factors were modified by the addition of octanoic acid to the mobile phase. Chiral resolution of the enantiomers of all nine 2-APA-NSAIDs studied was achieved. Preliminary studies show that in addition to being a useful chiral analytical tool for this therapeutically important series of compounds, the HSA chiral stationary phase may provide useful information on the affinity and binding mechanism of small molecules to HSA.     

Metal-organic approach to binary optical memory

Two new Ru(II) diimine chromophores, each containing a single photochromic dianthryl unit, have been prepared and characterized. The photoluminescence from the Ru(II) complexes is modulated by the photochromic action of the dianthryl species, which serves as a triplet energy transfer quencher in one photochromic state. The coupling of the dianthryl photochromic action to the Ru(II) complex emission permits nondestructive photoluminescence readout of binary information photochemically recorded on the molecular level. Luminescent images stored on polystyrene films that contain these molecules maintained their integrity for periods of months with no apparent degradation or variation in the image resolution, suggesting their durability for long-term storage in read-only memory applications.     

Green photoluminescence from platinum(II) complexes bearing silylacetylide ligands

The synthesis, structural characterization, photoluminescence properties, and density functional theory analysis of three Pt(II) diimine complexes, Pt(dbbpy)(C triple bond CR)2 [dbbpy = 4,4'-di(tert-butyl-2,2'-bipyridine; R = -SiMe3, -CC-SiMe3, or -t-Bu], are presented. The Pt(dbbpy)(C triple bond C-tBu)2 complex serves as a carbon-based ligand structure for which the photophysical properties of the two silicon-bearing complexes are compared in dichloromethane. Pt(dbbpy)(C triple bond C-SiMe3)2 and Pt(dbbpy)(C triple bond C-C triple bond C-SiMe3)2 display visible absorptions with strong green emission (lambda(emmax) = 526 and 524 nm, respectively) while Pt(dbbpy)(C triple bond C-t-Bu)2 displays efficient, long-lived yellow emission (lambda(emmax) = 557 nm). Direct side by side comparisons of Pt(dbbpy)(C triple bond C-SiMe3)2 and Pt(dbbpy)(C triple bond C-t-Bu)2 suggest that the difference in excited state energy results from the relative sigma-donor strength of the acetylide ligands.     

Evaluation of MNDO calculated proton affinities

A large set of charged species arising mainly from protonation or deprotonation of hydrocarbons, alcohols, ethers, carboxylic acids, amines, imines, and nitriles has been studied by means of the semiempirical self-consistent-field (SCF ) molecular orbital (MO ) MNDO method. From the calculated heats of formation of such charged species and those of neutral molecules, MNDO -estimated proton affinities have been obtained and the results compared with experimental gas-phase proton affinities. If the small size anions and acetylides, for which the method predicts heats of formation too large, are ruled out, the mean absolute error in calculated proton affinities is ca. 7 kcal/mol for hydrocarbons (22 acid-base pairs) and ca. 8 kcal/mol for oxygen-containing compounds (25 acid-base pairs). For nitrogen-containing molecules it is necessary to discard, in addition, the values corresponding to the protonation of alkylamines and imines in order to achieve a reasonable mean absolute error of 7–8 kcal/mol.     

Preliminary evaluation of the cadmium concentration in seawater of the Salvador City, Brazil

A method for preconcentration and determination of trace amounts of cadmium in high saline samples is described. It is based on the adsorption of the metal in the activated carbon as complex cadmium(II)-4-(2-pyridylazo-resorcinol) (PAR). The final determination was carried by flame atomic absorption spectrometry (FAAS). The optimization of extraction parameters such as the pH effect, PAR mass, activated carbon mass and shaking time was carried out using a two-level full factorial design (2⁴) and two Doehlert matrix designs. The results of the factorial design, considering the analysis of variance (ANOVA), demonstrate that all these factors are statistically significant, as well as the interactions (pH×PAR mass), (pH×activated carbon mass) and (activated carbon mass×shaking time). The final optimization was carried out using Doehlert matrix designs considering the results of the factorial design. The recoveries were quantitative (96.0-106.7%) for seawater samples spiked with Cd at concentrations of 0.125 and 0.625 μg l⁻¹. A preconcentration factor of 149 was obtained. The effect of diverse metallic ions on the proposed procedure was investigated too. The procedure was used for cadmium determination in surface seawater samples collected in Salvador City, Brazil. The cadmium content in the analysed samples varies from 0.035 to 0.17 μg l⁻¹. These results are agreement with other data reported in the literature.