A novel fiber Bragg grating high-temperature sensor

A novel fiber Bragg grating (FBG) sensor for the measurement of high temperature is proposed and experimentally demonstrated. The interrogation system of the sensor system is simple, low cost but effective. The sensor head is comprised of one FBG and two metal rods. The lengths of the rods are different from each other. The coefficients of thermal expansion of the rods are also different from each other. The FBG will be strained by the sensor head when the temperature to be measured changes. The temperature is measured basis of the wavelength shifts of the FBG induced by strain. A dynamic range of 0–800 °C and a resolution of 1 °C have been obtained by the sensor system. The experiment results agree with theoretical analyses.     

Coexisting four-wave mixing and six-wave mixing in three-level atomic system

We demonstrate the coexisting four-wave mixing (FWM) signal and six-wave mixing (SWM) signal which can be enhanced both by electromagnetically induced transparency (EIT) and optical pumping effect in a common three-level and open four-level inverted-Y type systems of ⁸⁵Rb. We also analyze the effect of optical pumping in different energy level systems by arranging laser beams and comparing the strength of the increased and reduced absorption caused by optical pumping.     

正电子湮没参量及其所反映物质信息的探讨

本根据正电子在凝聚态物质中的湮没机制及捕获模型,讨论了正电子湮没参量——正电子寿命谱和多普勒线形等参量所反映的物质信息,给出了各正电子湮没参量与所反映的物质信息之间的定量关系。分析了在该体系中正电子寿命参量与局域电子密度、多普勒线形参量和角关联参量与电子动量密度分布和费米面之关联。     

In situ formation of a biomimetic lipid membrane triggered by an aggregation-enhanced photoligation chemistry

Nature or synthetic systems that can self-assemble into biomimetic membranes and form compartments in aqueous solution have received extensive attention. However, these systems often have the problems of requiring complex processes or lacking of control in simulating lipid synthesis and membrane formation of cells. This paper demonstrates a conceptually new strategy that uses a photoligation chemistry to convert nonmembrane molecules to yield liposomes. Lysosphingomyelin (Lyso) and 2-nitrobenzyl alcohol derivatives (NBs) are used as precursors and the amphiphilic character of Lyso promotes the formation of mixed aggregates with NBs, bringing the lipid precursors into close proximity. Light irradiation triggers the conversion of NBs into reactive aldehyde intermediates, and the preassembly facilitates the efficient and specific ligation between aldehyde and Lyso amine over other biomolecules, thereby accelerating the synthesis of phospholipids and forming membrane compartments similar to natural lipids. The light-controllable transformation represents the use of an external energy stimulus to form a biomimetic phospholipid membrane, which has a wide range of applications in medicinal chemistry, synthetic biological and abiogenesis.

A photoligation chemistry was used to drive the formation of biomimetic membranes in situ. The preassembly of precursors promotes the synthesis of lipid, which is an important feature as a candidate for simulating natural membrane functions.     

Effects of Ionic Liquids on the Thermodynamics of Hydrogen Activation by Frustrated Lewis Pairs: A Density Functional Theory Study**

Nowadays, hydrogen activation by frustrated Lewis pairs (FLPs) and their applications are one of the emerging research topics in the field of catalysis. Previous studies have shown that the thermodynamics of this reaction is determined by electronic structures of FLPs and solvents. Herein, we investigated systems consisting of typical FLPs and ionic liquids (ILs), which are well known by their large number of types and excellent solvent effects. The density functional theory (DFT) calculations were performed to study the thermodynamics for H₂ activation by both inter- and intra-molecular FLPs, as well as the individual components. The results show that the computed overall Gibbs free energies in ILs are more negative than that computed in toluene. Through the thermodynamics partitioning, we find that ILs favor the H−H cleavage elemental step over the elemental steps of proton attachment, hydride attachment and zwitterionic stabilization. Moreover, the results show that these effects are strongly dependent on the type of FLPs, where intra-molecular FLPs are more affected compared to the inter-molecular FLPs.     

Urea Detection of Electrochemical Transistor Sensors based on Polyanline (PANI)/MWCNT/Cotton Yarns

A cotton yarn biosensor based on electrochemical transistor functionalized with MWCNT and PANI was developed for the detection of urea. The transistors based on PANI/MWCNT/cotton yarns under optimized MWCNT concentration has been obtained, which exhibited high on/off current ratio, fast response time, and good operational stability. A transistor-based urea sensor was prepared from PANI/MWCNT/cotton yarns, which could monitor urea in the 1 nM–1 mM linear range with the correlation coefficient of 0.9716. Furthermore, the sensor showed superior reproducibility and high specificity. The practical applications of the proposed sensor were also confirmed. These results indicate the flexible transistor can be used as an efficient platform for biological detection in body fluids.     

Growth of Single-walled Carbon Nanotubes on Substrates Using Carbon Monoxide as Carbon Source

The growth of single-walled carbon nanotubes(SWCNTs) on substrates has attracted great interests because of the potential applications in various fields. Carbon monoxide(CO) was used as the carbon source for the growth of SWCNTs on silicon substrates. Random or oriented SWCNTs can be produced by varying the CO flow rate. When the flow rate of CO was as low as 20 sccm(sccm:standard cubic centimeter per minute), dense SWCNT networks with clean surface were produced. When the flow rate was above 50 sccm, vertically aligned SWCNT(VA-SWCNT) arrays were grown. Well-aligned VA-SWCNT arrays were obtained in the temperature range of 650-800℃ and the content of large-diameter(above 1.7 nm) tubes in the array increased with the temperature. The height of the array was affected by the growth temperature, the CO flow rate, and the growth time. These findings indicate CO can be used as an efficient carbon source for the growth of SWCNTs on substrates under low flow rates.