Electrochemical behavior and determination of epinephrine at a mercaptoacetic acid self-assembled gold electrode

The electrochemical behavior of epinephrine (EP) at a mercaptoacetic acid (MAA) self-assembled monolayer modified gold electrode was studied. The MAA/Au electrode is demonstrated to promote the electrochemical response of epinephrine by cyclic voltammetry. The possible reaction mechanism is also discussed. The diffusion coefficient D of EP is 6.85 × 10⁻⁶ cm² s⁻¹. In 0.1 mol L⁻¹ phosphate buffer (pH 7.20), a sensitive oxidation peak was observed at 0.177 V, and the peak current is proportional to the concentration of EP in the range of 1.0 × 10⁻⁵–2.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁷–1.0 × 10⁻⁶ mol L⁻¹. The detection limit is 5 × 10⁻⁸ mol L⁻¹. The modified electrode is highly stable and can be applied to the determination of EP in practical injection samples. The method is simple, quick, sensitive and accurate.     

Itosides A – I,New Phenolic Glycosides from Itoa orientalis

Eight new benzoylated gentisyl alcohol (=2‐(hydroxymethyl)benzene‐1,4‐diol) glucosides, itosides A–H ( 1 – 8 ), together with the new pyrocatechol (=benzene‐1,2‐diol) glycoside itoside I ( 9 ) were isolated from the bark and twigs of Itoa orientalis (Flacourtiaceae). In itosides B–D ( 2 – 4 ), the gentisyl alcohol moiety was esterified by 1‐hydroxy‐6‐oxocyclohex‐2‐ene‐1‐carboxylic acid, while itosides E–H ( 5 – 8 ) contained instead an additional 2‐hydroxybenzoic acid moiety. The compounds were accompanied by the known derivatives 4‐hydroxytremulacin ( 10 ), poliothyrsoside ( 11 ), poliothyrsin ( 12 ), homaloside D ( 13 ), tremulacin, and pyrocatechol β‐D ‐glucopyranoside. The structures of the new compounds were elucidated by spectral and chemical methods.     

Sensitive Voltammetric Response of p‐Nitroaniline on Single‐Wall Carbon Nanotube‐Ionic Liquid Gel Modified Glassy Carbon Electrodes

An ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆)‐single‐walled carbon nanotube (SWNT) gel modified glassy carbon electrode (BMIMPF₆‐SWNT/GCE) is fabricated. At it the voltammetric behavior and determination of p‐nitroaniline (PNA) is explored. PNA can exhibit a sensitive cathodic peak at ?0.70 V (vs. SCE) in pH 7.0 phosphate buffer solution on the electrode, resulting from the irreversible reduction of PNA. Under the optimized conditions, the peak current is linear to PNA concentration over the range of 1.0×10^?8–7.0×10^?6 M, and the detection limit is 8.0×10^?9 M. The electrode can be regenerated by successive potential scan in a blank solution for about 5 times and exhibits good reproducibility. Meanwhile, the feasibility to determine other nitroaromatic compounds (NACs) with the modified electrode is also tested. It is found that the NACs studied (i.e., p‐nitroaniline, p‐nitrophenol, o‐nitrophenol, m‐nitrophenol, p‐nitrobenzoic acid, and nitrobenzene) can all cause sensitive cathodic peaks under the conditions, but their peak potentials and peak currents are different to some extent. Their peak currents and concentrations show linear relationships in concentration ranges with about 3 orders of magnitude. The detection limits are 8.0×10^?9 M for p‐nitroaniline, 2.0×10^?9 M for p‐nitrophenol, 5.0×10^?9 M for o‐nitrophenol, 5.0×10^?9 M for m‐nitrophenol, 2.0×10^?8 M for p‐nitrobenzoic acid and 8.0×10^?9 M for nitrobenzene respectively. The BMIMPF₆‐SWNT/GCE is applied to the determination of NACs in lake water.     

Cu掺杂对LaMnO3催化剂的结构和催化氧化性能的影响

采用非晶态多核配合的方法合成了La1-xCuxMnO3(x=0、0.05、0.1、0.2、0.3、0.4、0.5)系列催化剂, 并用X射线衍射(XRD)、透射电镜(TEM)、比表面测定仪(BET)等手段对催化剂的微观结构进行了表征. 研究了Cu掺杂对钙钛矿结构及其对CO催化氧化发光性能及催化氧化CO、CH4性能的影响规律. 结果表明, 当x≤0.1 时, Cu掺杂仍可形成单相的钙钛矿结构; 当x>0.1时, 过量掺杂的Cu以CuO杂相存在. Cu掺杂可改善La1-xCuxMnO3催化剂对CO和CH4的催化氧化活性. 经700 ℃焙烧3 h制备的La0.9Cu0.1MnO3催化剂具有最高CO催化氧化活性(T100%=170 ℃), 该结果与CO催化氧化发光结果一致.而La0.95Cu0.05MnO3催化剂对CH4的催化氧化活性最高(T95%=705 ℃).     

Effects of organic solvents on the structure stability of TS-1 for the ammoximation of cyclohexanone

The effects of organic solvents on the ammoximation of cyclohexanone to cyclohexanone oxime with H₂O₂and NH₃ over TS-1 were studied. To investigate the effects of ammonia and organic solvents on the structure stability of the catalyst, TS-1 samples were pretreated under severe conditions in ammonia solution or ammonia solution plus methanol, toluene or t-butanol, respectively, and then characterized bySEM, XRD, FTIR, etc. The results revealed that t-butanol is the best solvent for the ammoximation reaction; ammonia tends to destroy the active sites, -Ti-O-Si- structure in TS-1, but the presence of organic solvents remarkably limits this damaging effect of ammonia.     

A Pair of Novel Heptentriol Stereoisomers from the Ascomycete Daldinia concentrica

A pair of novel heptentriol stereoisomers, hept‐6‐ene‐2,4,5‐triols 2 and 3 , were isolated from the culture broth of the ascomycete Daldinia concentrica (Bolton : Fries ) Cesati & De Notaris , besides three known compounds, i.e., 2,3‐dihydro‐5‐hydroxy‐2‐methyl‐4H‐1‐benzopyran‐4‐one ( 1 ), 3,5‐dihydroxy‐2‐(1‐oxobutyl)‐cyclohex‐2‐en‐1‐one ( 4 ), and pyroglutamic acid (=5‐oxo‐L ‐proline; 5 ). Their structures were determined by spectroscopic means, including 2D‐NMR (HMQC, HMBC, ¹H,¹H‐COSY).     

核磁共振法研究CH2=CHSi（OET）3的水化反应

高强水泥的生产近年来巳成为许多国家发展水泥生产的一个主要方向。在水泥中加入有机单体可以改善混凝土的质量,如加重量比为3％的有机硅烷偶联剂乙烯基三乙氧基硅烷CH_2=CHSi(OEt)_3(简称VTES)于水泥中,即可在较大程度上增加水泥石的强度。     

Structure of Palladium( Ⅱ ) Complex with 2-Hydroxy-propane 1, 3-diamine-N,N,N'''' N'''',-tetraacetic Acid

The reaction of PdCl2 in water with 2-hydroxypropane-1, 3-diaminetetraacetic acid (HPDTA) gave the complex Pd (C11H16N2O9)·1. 5H2O, which was characterized by elemental analysis, IR, NMR and single-crystal X-ray diffraction. The spectroscopic and X-ray diffraction data show that Pd ( Ⅱ ) is coordinated by two nitrogen atoms and two car-boxylic oxygen atoms. The complex crystallizes in monoclinic space group Pc with a = 1. 1240(2), b=1. 1183(2), c=1. 2597(3) nm, β=96. 33(2)°V=1. 5737(6) nm3, Z = 4, R= 0.038. The structure contains two crystallographically independent molecules which have slightly different orientations and are connected by hydrogen bonds.     

Cyclic Voltammograms of Ferrocene on Multi‐Walled Carbon Nanotubes (MWCNTs)‐Modified Edge Plane Pyrolytic Graphite (EPPG) Electrode in Room Temperature Ionic Liquids (RTILs) of 1‐Ethyl‐3‐Methylimidazolium Tetrafluoroborate (EMIBF4)

In this work, the electrochemical behavior of ferrocene (Fc) was investigated by cyclic voltammetry (CV) in room temperature ionic liquids (RTILs) of 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) on glass carbon (GC), edge plane pyrolytic graphite (EPPG) and multi‐walled carbon nanotube (MWCNTs)‐modified EPPG electrodes, respectively. The results demonstrated that on GC electrode, pairs of well‐defined reversible peaks were observed, while for the electrode of EPPG, the peak potential separation (ΔE_p) is obviously larger than the theoretical value of 59 mV, hinting that the electrode of EPPG is distinguished from the commonly used electrode, consistent with the previous proposition that EPPG has many “defects”. To obtain an improved electrochemical response, multi‐walled carbon nanotubes (MWCNTs) were modified on the electrode of EPPG; the increased peak current and promoted peak potential separation not only proved the existence of “defects” in MWCNTs, but also supported that “creating active points” on an electrode is the main contribution of MWCNTs. Initiating the electrochemical research of Fc on the MWCNTs‐modified EPPG electrode in RTILs and verifying the presence of “defects” on both EPPG and MWCNTs using cyclic voltammograms (CVs) of Fc obtained in RTILs of EMIBF₄, is the main contribution of this preliminary work.     

Nitrile-functionalized pyridinium ionic liquids: synthesis, characterization, and their application in carbon-carbon coupling reactions

A series of relatively low-cost ionic liquids, based on the N-butyronitrile pyridinium cation [C(3)CNpy](+), designed to improve catalyst retention, have been prepared and evaluated in Suzuki and Stille coupling reactions. Depending on the nature of the anion, these salts react with palladium chloride to form [C(3)CNpy](2)[PdCl(4)] when the anion is Cl(-) and complexes of the formula [PdCl(2)(C(3)CNpy)(2)][anion](2) when the anion is PF(6)(-), BF(4)(-), or N(SO(2)CF(3))(2)(-). The solid-state structures of [C(3)CNpy]Cl and [C(3)CNpy](2)[PdCl(4)] have been established by single-crystal X-ray diffraction. The catalytic activity of these palladium complexes following immobilization in both N-butylpyridinium and nitrile-functionalized ionic liquids has been evaluated in Suzuki and Stille coupling reactions. All of the palladium complexes show good catalytic activity, but recycling and reuse is considerably superior in the nitrile-functionalized ionic liquid. Inductive coupled plasma spectroscopy reveals that the presence of the coordinating nitrile moiety in the ionic liquid leads to a significant decrease in palladium leaching relative to simple N-alkylpyridinium ionic liquids. Palladium nanoparticles have been identified as the active catalyst in the Stille reaction and were characterized using transmission electron microscopy.