Controlling the surface buckling wrinkles by patterning the material system of hard-nano-film/soft-matter-substrate

Wrinkling and buckling of nano-films on the compliant substrate are always induced due to thermal deformation mismatch.This paper proposes effective means to control the surface wrinkling of thin film on the compliant substrate,which exploits the curvatures of the curve cracks designed on the stiff film.The procedures of the method are summarized as:1)curve patterns are fabricated on the surface of PDMS(Polydimethylsiloxane)substrate and then the aluminum film with the thickness of several hundred nano-meters is deposited on the substrate;2)the curve patterns are transferred onto the aluminum film and lead to cracking of the film along the curves.The cracking redistributes the stress in the compressed film on the substrate;3)on the concave side of the curve,the wrinkling of the film surface is suppressed to be identified as shielding effect and on the convex side the wrinkling of the film surface is induced to be identified as inductive effect.The shielding and inductive effects make the dis-ordered wrinkling and buckling controllable.This phenomenon provides a potential application in the fabrication of flexible electronic devices.     

Investigation of laminar plasma remelting/cladding processing

Investigation of remelting and cladding processing with laminar plasma jets on several metals has been conducted looking for possible development of a new surface modification technique. The remelting tests illustrated that the new method could evidently improve the material microstructure and properties of cast iron. The cladding was done with Al₂O₃ ceramic powder on stainless steel. The energy dispersive spectra (EDS) analysis was used to determine the distribution of the major cladding element in the plasma-processed layers, for which the microstructure observations and hardness measurements were also performed.     

塑料光纤拉丝塔控制系统设计

为减小塑料光纤纤芯直径波动造成的非固有散射损耗,设计了一种新型光纤拉丝塔控制系统,详细阐述了其工作原理及软硬件实现过程。采用单片机作为核心处理部件,合理设计传感器测温电路、加热炉温度控制电路、直径测量和控制电路以及友好的人机界面。实验表明系统拉丝芯径范围宽(0.2～3mm),拉制光纤直径均匀,精度可控制在15μm以内。整个系统成本低,实用价值高,满足塑料光纤实验室研究需要,可供实际生产参考。     

模拟回火马尔可夫链蒙特卡罗全波形分析方法

针对传统的全波形分析方法不能快速自动处理全波形数据的缺点,提出了一种模拟回火马尔可夫链蒙特卡罗全波形分析法,用于求解全波形数据中的波峰数和峰值位置等参量.该方法采用Metropolis更新策略求解波峰数量和噪声两个参量,以达到快速求解的目的;而峰值位置和波峰幅值则采用改进的模拟回火策略求解,通过添加的主动干预回火步骤实现对参量更新过程的有效探测,以满足对速度或运算收敛性的要求.模拟回火马尔可夫链蒙特卡罗全波形分析方法以马尔可夫算法为基础,仍保持马氏链的收敛性,从而保证本方法具有良好的鲁棒性,实现对全波形数据的自动化处理.     

The effects of rain clutter on millimeter radar performance

The effects of rain clutter on millimeter radar performance are investigated at 35, 94 and 140GHz frequencies, including rain attenuation, radar reflectivity, maximum radar range and equivalent target cross section.     

Quantum Phase Transition and Ferromagnetic Spin Correlation in Parallel Double Quantum Dots

We investigate electronic transport through a parallel double quantum dot （DQD） system with strong on-site Coulomb interaction, as well as the interdot tunnelling. By applying numerical renormalization group method, the ground state of the system and the transmission probability at zero temperature are obtained. For a system of quantum dots with degenerate energy levels and small interdot tunnel coupling, the spin correlations between the DQDs is ferromagnetic, and the ground state of the system is a spin-1 triplet state. The linear conductance will reach the unitary limit （2e^2/h） due to the Kondo effect at low temperature. As the interdot tunnel coupling increases, there is a quantum phase transition from ferromagnetic to anti-ferromagnetic spin correlation in DQDs and the linear conductance is strongly suppressed.     

Effects of sintering temperature and atmosphere on magnetism in Mn-doped TiO2 bulk samples

Magnetic properties have been investigated on Mn doped TiO₂(Ti_0.98Mn_0.02O₂) bulk samples prepared by solid state reaction, which were sintered at different temperature ranging from 450 ^°C to 900 ^°C in air and argon atmosphere, respectively. The results show that the magnetic properties were strongly dependent on the sintering temperature and atmosphere. For samples sintered in air, the magnetization initially increase with the increase of sintering temperature up to 600 ^°C and thereafter it decrease. While the magnetization of samples sintered in argon atmosphere decreases monotonically with the increase of sintering temperature. Furthermore, for samples sintered at 600 ^°C in air, the magnetic susceptibility exhibits a dominant Curie-Weiss behaviour and no magnetic transition is observed over the temperature range from 10 to 300 K. In contrast, for samples sintered in argon atmosphere, besides the magnetic transition near 45 K perhaps caused by Mn₃O₄, another magnetic transition appears near room temperature.     

A Novel Method for the Detection of Trace Gases Based on Photo-Acoustic Spectroscopy

We study quartz tuning fork (QTF) characteristics using a 532 nm semiconductor laser with a power of 39 mW and calculate QTF vibrations caused by thermal noise and disturbance of the air using the equipartition theorem; the vibration value is about 1.152 Pm. The signal-to-noise ratio and QTF resonance amplitude acquired experimentally are 104.56 and 214.75 Pm, respectively. In addition, we develop a new photo-acoustic spectroscopic system for detection of trace acetylene using a CW diode laser source with distributed feedback operating near 1,532 nm, measure the absorption spectrum of acetylene employing this system, and show that the method elaborated is more sensitive than photoelectric detectors that provides new directions for research in photo-acoustic spectroscopy.     

Application of the first collision source method to CSNS target station shielding calculation

Ray effects are an inherent problem of the discrete ordinates method. RAY3 D, a functional module of ARES, which is a discrete ordinates code system, employs a semi-analytic first collision source method to mitigate ray effects. This method decomposes the flux into uncollided and collided components, and then calculates them with an analytical method and discrete ordinates method respectively. In this article, RAY3 D is validated by the Kobayashi benchmarks and applied to the neutron beamline shielding problem of China Spallation Neutron Source(CSNS)target station. The numerical results of the Kobayashi benchmarks indicate that the solutions of DONTRAN3 D with RAY3 D agree well with the Monte Carlo solutions. The dose rate at the end of the neutron beamline is less than10.83 μSv/h in the CSNS target station neutron beamline shutter model. RAY3 D can effectively mitigate the ray effects and obtain relatively reasonable results.