含内裂纹的有限圆盘的平面问题

本文用弹性理论复变函数方法讨论了在内部任意位置含直线裂纹的有限圆盘在一般载荷作用下的平面问题,得到了复应力函数和应力强度因子用级数表示的一般表达式,并对此问题讨论了三种特殊情形,即裂纹受均布压应力,均布剪应力和圆盘匀速旋转的情形,其中还给出了计算应力强度因子的近似式.计算结果表明,对位于圆盘内部且不靠近外边界的中、小裂纹,这些近似式给出好的或较好的近似.     

Near-Optimal Controls of Discrete-Time Dynamic Systems Driven by Singularly-Perturbed Markov Chains

This work is devoted to near-optimal controls of large-scale discrete-time nonlinear dynamic systems driven by Markov chains; the underlying problem is to minimize an expected cost function. Our main goal is to reduce the complexity of the underlying systems. To achieve this goal, discrete-time control models under singularly-perturbed Markov chains are introduced. Using a relaxed control representation, our effort is devoted to finding near-optimal controls. Lumping the states in each irreducible class into a single state gives rise to a limit system. Applying near-optimal controls of the limit system to the original system, near-optimal controls of the original system are derived.     

Viscosity solutions of fully nonlinear parabolic systems

In this paper, we discuss the viscosity solutions of the weakly coupled systems of fully nonlinear second-order degenerate parabolic equations and their Cauchy-Dirichlet problem. We prove the existence, uniqueness and continuity of viscosity solution by combining Perron's method with the technique of coupled solutions. The results here generalize those in Proc. London Math. Soc. 63 (1991) 212-240 and Comm. Partial Differential Equations 16 (1991) 1095-1128.     

Analysis of dispersion characteristics of groove guides with mode-matching method

Groove guide is widely recognized as one of the most promising millimeter wave transmission structures. In this paper, the mode-matching method is used to analyse the dispersion characteristics of single and asymmetrical double groove guides, and the unified formulae of Nth-order approximation dispersion equations are presented. Based on this analysis, a general program for calculating the dispersion characteristrics of single and asymmetrical double groove guides has been completed. Some comparisons between the results obtained by present method and published data show that very good agreement has been seen. The effectiveness and the reliability of the given formulae and program are thus verified.     

横向位移双曝光散斑图维纳谱的信息分布

讨论了横向位移双曝光散斑图维纳谱的信息分布，并由此导出杨氏纹图的一般表达式。讨论了条纹可见度与应变，面内转动，照明光束直径与条纹图图空间坐标的关系，指出了在条纹可见度影响下最大可见条纹数目。还讨论了散斑衬比与衍射晕的关系。     

二次微分系统的中心条件和通积分

本文给出在中国分类之下二次微分系统有中心时两种情况的通积分.     

高阶非线性时滞差分方程解的渐近性

研究如下的具强迫项的高阶非线性时滞差分方程△^my(n) u(n)l↑∑i=1 gi(y(n-τ))=v(n)其中，m≥1，u,v：N→R，gi：R→R且τ∈{0，1，2，3，…)，i=1，2，…，l，得到了使该方程的解具有某种渐近性态的充分条件。     

CSRm束流径向和轴向振荡的耦合

介绍了由于磁铁的安装误差和螺线管的存在而造成的束流径向和轴向的耦合，以及耦合对束流稳定的影响。结合CSRm结构的典型参数分析得出:二极磁铁和四极磁铁在纵向角安装偏差为-0.5~0.5 mrad；有螺线管存在的情况下，工作点落在和共振线时，将导致束流不稳定而大量损失，落在差共振线时，束流稳定。通过模拟计算发现:螺线管产生的耦合远大于磁铁的纵向角安装偏差产生的耦合。     

Investigation of the stability for inviscid compressible swirling flow between concentric cylinders

The temporal stability on inviscid compressible swirling flow between two concentric cylinders is investigated. First, a linearized differential equation is derived. Two stability criteria are derived for compressible swirling flow by an analytic method analogous to Ludwieg ’s method. A finite-difference numerical method is then used to solve the eigenvalue problem of this differential equation, to get temporal growth rate and to check these stabilitv criteria derived. Finally.The effect of compressibility for stability is disscused.     

Estimation of temperature elevation generated by ultrasonic irradiation in biological tissues using the thermal wave method

In most previous models,simulation of the temperature generation in tissue is based on the Pennes bio-heat transfer equation,which implies an instantaneous thermal energy deposition in the medium.Due to the long thermal relaxation time τ(20 s-30 s) in biological tissues,the actual temperature elevation during clinical treatments could be different from the value predicted by the Pennes bioheat equation.The thermal wave model of bio-heat transfer(TWMBT) defines a thermal relaxation time to describe the tissue heating from ultrasound exposure.In this paper,COMSOL Multiphysics 3.5a,a finite element method software package,is used to simulate the temperature response in tissues based on Pennes and TWMBT equations.We further discuss different factors in the bio-heat transfer model on the influence of the temperature rising and it is found that the temperature response in tissue under ultrasound exposure is a rising process with a declining rate.The thermal relaxation time inhibits the temperature elevation at the beginning of ultrasonic heating.Besides,thermal relaxation in TWMBT leads to lower temperature estimation than that based on Pennes equation during the same period of time.The blood flow carrying heat dominates most to the decline of temperature rising rate and the influence increases with temperature rising.On the contrary,heat diffusion,which can be described by thermal conductivity,has little effect on the temperature rising.