分析非轴对称腔的复光线数值迭代法

将像散光束的复光线表示法用于分析非轴对称腔，并对有复杂像散的折迭腔作了数值迭代计算以说明方法的应用．     

排气全燃型联合循环设计点性能简明估计公式

排气全燃型联合循环设计点性能简明估计公式蔡睿贤（中国科学院工程热物理研究所北京１０Ｏ０８０）关键词：排气全燃型联合循环，热力分析主要符号表Ｈｕ燃料热值Ｌ燃料理论空气量ｌ比功Ｐ单位能量价格Ｒ燃气轮机与蒸汽轮机的功率比α过量空气系数β摩尔燃料系数△增量η...     

Matrix representation of three-dimensional astigmatic resonators

Three-dimensional astigmatic resonators, typical examples of which are the resonators bounded by cylindrical-spherical mirrors and cylindrical-cylindrical mirrors oriented at an arbitrary crossed angle, are investigated in detail by using a complex curvature tensor concept and generalized tensor ABCD law. Computerized numerical calculations illustrate some interesting characteristics of these astigmatic resonators.     

One convenient synthesis route to boron nitride nanotube

We describe one convenient synthesis route to boron nitride (BN) nanotube by the reaction of boron powder, iron oxide, and ammonium chloride at 600 °C for 12 h. Characterized by XRD, FTIR, XPS, TEM and SAED, the composition and morphology of the products are confirmed. The possible reaction mechanism is also discussed.     

The Fundamental Experiments of Red Tide Chemical Forecast

Many food algae and red tide algae were cultivated in the f/2 medium, and the nitric oxide (NO) concentration of the medium and the cell density were determined. The experiments on algae were conducted when different concentrations of NO were added into the medium using two methods. The results show that low concentrations of NO were self-produced by marine algae during the exponential growth period and were about nmol/L level. But at the end of the period, i.e., 2 or 3 days before the cell density reaches the maximum, an NO peak appeared, with the NO concentration reaching 10 nmol/L. The NO threshold concentration exists according to the influence of exogenous NO on the marine phytoplankton growth. One type is the threshold concentration that can promote algae growth, and its value is between 10 and 1 nmol level, or even lower. The other type can inhibit the phytoplankton growth, which is about μmol level or higher. The results indicate that red tide algae are far more sensitive to NO than are food algae. The fundamental experimental outcome above may provide a new clue for red tide chemical forecast by inspecting the NO change.     

PERIODIC BOUNDARY VALUE PROBLEM FOR SECOND ORDER FUNCTIONAL DIFFERENTIAL EQUATIONS

This paper investigates the periodic boundary value problems for a class of second order functional differential equations. The monotone iterative technique and the maximum principle are applied to obtain the existence of maximal and minimal solutions.     

A polymer onium acting as phase-transfer catalyst in halogen-exchange fluorination promoted by microwave

A polymerized quaternary ammonium salt polydiallyldimethylammonium chloride, exhibiting high stability to heat and base, was prepared and applied as phase-transfer catalyst (PTC) in halogen-exchange (Halex) fluorination of chloronitrobenzenes to give excellent yields of corresponding fluoronitrobenzenes. Dimethyl sulfoxide was found to be the best solvent when microwave was applied as heating resource.     

氧氟沙星和左氟沙星与人血清白蛋白的相互作用研究

用光谱技术研究了水溶液中氧氟沙星(OFLX)和左氟沙星(LVFX)与人血清白蛋白相互作用的机制.荧光猝灭法测得的结果表明反应的结合常数为KOFLX＝0.482×105L@mol-1,KLVFX=0.529×105L@mol-1,结合位点数nOFLX＝0.72,nLVFX=0.74.按照Fōorster非辐射能量转移理论得到药物-蛋白之间的结合距离分别为rOFLX=2.94nm,nVFX=2.85 nm.实验结果说明OFLX与LVFX在体内与蛋白结合直到运输到受体部位这一环节基本相同.     

Fracture mechanisms of Hg0.8Cd0.2Te induced by pulsed TEA-CO2 laser

The fracture mechanisms of Hg_0.8Cd_0.2Te induced by pulsed TEA-CO₂ laser have been investigated theoretically and experimentally in this paper. The Hg_0.8Cd_0.2Te target was irradiated by a TEA-CO₂ laser with wavelength of 10.6 μm and spike width of 240 ns in an ambient atmosphere. The evident cracks can be found on the surface of the target from the scanning electron microscopy (SEM) photos, indicating that the severe breaks happened during the experiment. Theoretical analysis has also been carried out and the results show that the fracture of Hg_0.8Cd_0.2Te is mainly induced by thermal stresses, although there are three forces (thermal stress, evaporation wave and laser-supported detonation (LSD) wave) exerted on the target surface during the process.     

The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid–liquid phase separation

In this article a new technique was developed to fabricate scaffolds with a unique microstructure by solid–liquid separation in combination with particulate-leaching. Firstly, the effects of polymer concentration, quenching temperature on the porous morphology and the mechanical property of obtained scaffolds during solid–liquid separation have been investigated. Then, salt granules as porogen were introduced into the solid–liquid phase separation to produce the unique pore structure of the scaffold. The pore diameter of the scaffold could be controlled with the particulate size and the wall of pores possessed special microstructure, which enhanced the pore interconnectivity. The cell culture results confirmed that a good interconnectivity of the scaffold prepared by the improved solid–liquid separation was useful for nutrition transportation and cell proliferation. Copyright © 2003 John Wiley & Sons, Ltd.