Self-assembling of helical poly(phenylacetylene) carrying L-valine pendants in solution, on mica substrate, and on water surface

In the present work, we investigated self-assembling of a poly(phenylacetylene) carrying L-valine pendants (PPA-Val) in a water/methanol solution, upon evaporation of the solution on mica, and on the water surface. With intercalation of a fluorescence probe of Ru(phen)2(dppx)2+ (phen = 1,10-phenanthroline, dppx=7,8-dimethyldipyridophenazine) into the hydrophobic cavities associated by the PPA-Val chains, their helical structures were directly detected in solution with an in situ fluorescence microscope. Helical aggregates were observed with AFM upon evaporation of the solvents, suggesting that the helical structures in the solution are the building blocks of the helical aggregates. Self-assembling structures of PPA-Val on the water surface were, however, very different from that formed upon evaporation of its THF solution on the mica surface. The polymer chains associated into a monolayer of extended fibers on the water surface, whereas superhelical fibers formed on the mica surface. Water molecules play a critical role in inducing the polymer to form diverse morphological structures in its bulk solution and on its surface. In solution, the isotropic hydrophobic effect drove the polymer chains to form superhelical aggregates, while on the water surface, the hydrophobic effect concentrated mainly on the lateral part of the polymer, thus giving a monolayer of extended fibers.     

Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

The effect of the sorbital nucleating agent on properties of the ethylene-octene copolymer (POE) toughened polypropylene (PP) was studied. The results show that the addition of POE increases notched Izod and Charpy impact strength significantly but impair the tensile strength and flexural modulus. As a nucleating agent (1,3,2,4-di(p-methylbenzylidene) sorbitol, DM) was added, the toughness and stiffness of toughed PP increased simultaneously at the same content of POE. This result shows that the toughness and stiffness of toughed PP are in balance. Polarized light microscopy analysis shows that with the addition of POE and nucleating agent, only a low level of PP spherulites were observed.     

Determination of silicon by an indirect atomic-absorption method using carbon-rod electrothermal atomization

An indirect procedure has been developed for the determination of trace amounts of silicon by atomic-absorption with carbon-rod electrothermal atomization. After dissolution, the silicon is extracted as silicomolybdic acid into a mixture of diethyl ether and pentan-1-ol (5 + 1). The co-extraction of excess of molybdate reagent is prevented by the addition of citrate, which also destroys phosphomolybdic and arsenomolybdic acids. The organic layer is washed with hydrochloric acid, mul quantities are transferred to the electrothermal atomizer and the molybdenum is measured. The method has been applied to analysis of several steels.     

某些含二维液晶基元的热致液晶高分子的向列态纹影响构

发现某些含二维液晶基元的热致液晶高分子容易产生反向壁织构与含有高强度有错点（│Ｓ│大于１）的向列态纹影织构。这类液晶高分子的织构与形态学特点与含一维棒状液晶基元的其他液晶高分子不同。     

Design,Synthesis, and Characterization of Photolabeling Probes for the Study of the Mechanisms of the Antiviral Effects of Ribavirin

Ribavirin, the only small molecule available so far for treating hepatitis‐C‐virus infection, was recently used in an emergency context to treat patients with severe acute respiratory syndrome (SARS) in the early stages of the disease. To study the mechanisms responsible for the antiviral effects of ribavirin by using a photolabeling approach, we designed, synthesized, and characterized the azidotriazole nucleosides 1 and 2 as photolabeling probes of ribavirin. These probes were synthesized either by performing nucleophilic substitution of the corresponding bromotriazole nucleoside with NaN₃ (Scheme 2) or by directly coupling the azidotriazole with the protected ribose sugar (Scheme 4). The azidotriazole nucleosides 1 and 2 showed a fast, clear‐cut photochemical reaction, which suggests that they are promising candidates for use in photolabeling studies.     

The Preparation and Characterization of Highly Dispersed PdO over Alumina for Low‐temperature Combustion of Methane

PdO/Al₂O₃ catalysts prepared by glow discharge plasma treatment followed by thermal calcination show a much higher dispersion and a better catalytic activity for methane combustion at relatively low temperatures. The dispersion of palladium active species by such plasma prepared catalysts is 29.7%, 5.4 times higher than that of conventional catalysts. XPS analysis indicates that a surface enrichment of Pd active species (PdO) has been achieved after plasma treatment. The surface atomic composition of PdO of plasma prepared catalysts reaches 10.5%. XRD characterization also confirms a wellcrystallized PdO phase present on the plasma prepared catalyst. The lightoff temperature of the plasma prepared catalyst is 370°C, 50°C lower than that obtained from the conventional catalyst.     

气相色谱法测定阳离子表面活性剂合成体系中脂肪烷基二甲基叔胺

选用HP-NINOWax毛细管色谱柱及氢火焰离子化检测器（FID），采用程序升温，建立了4种脂肪烷基二甲基叔胺的分析方法。结果表明，4种脂肪烷基二甲基叔胺质量浓度在0.005~1.0 g/L范围内，其峰面积与质量浓度有良好的线性关系，相关系数（R²）在0.9996以上。检出限（LODs，信噪比为3）在0.001~0.002 g/L之间，定量限（LOQs，信噪比为10）在0.003~0.005 g/L之间，回收率在90%~130%之间，相对标准偏差为1.3%~6.9%（n=6）。方法的线性范围宽、回收率高、选择性好，可用于叔胺的产品质量分析及生产过程控制分析。利用该方法对阳离子表面活性剂合成反应中十六烷基二甲基叔胺进行监测，结果很好地符合双分子亲核取代反应。该方法比滴定分析法更快速、精确，与液相色谱法相比，不需要进行柱前衍生或者使用色谱-质谱联用仪器。     

Synthesis, Characterization and Catalysis of New Pillared Anionic Clays by [GaW_(11)O_(39)M(H_2O)]~(7-)(M=Mn~(2 ),Co~(2 ) or Ni~(2 ))

ＩｎｔｒｏｄｕｃｔｉｏｎＡｎｉｏｎｉｃｃｌａｙｓ（ｌａｙｅｒｅｄｄｏｕｂｌｅｈｙｄｒｏｘｉｄｅｓ）ａｒｅｉｍｐｏｒｔａｎｔｌａｙｅｒｅｄｍａｔｅｒｉａｌｓ．Ｔｈｅｇｅｎｅｒａｌｆｏｒｍｕｌａｉｓ［Ｍ２＋（１－ｘ）Ｍｘ３＋（ＯＨ）２］ｘ＋Ａｎ－ｘ／ｎｍ...     

THERMODYNAMIC STUDY OF ADSORPTION OF PHENOLIC COMPOUNDS FROM AQUEOUS SOLUTION BY A WATER-COMPATIBLE HYPERCROSSLINKED POLYMERIC ADSORBENT

Equilibrium data for the adsorption of phenolic compounds, i.e., phenol, p-cresol, p-chlorophenol and p-nitrophenol from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent (NJ-8) within temperature range of 283-323 K were obtained and correlated with a Freundlich-type of isotherm equation, so that equilibrium constants KF and n were obtained. The capacities of equilibrium adsorption for all the four phenolic compounds on the NJ-8 from aqueous solutions are around 2 times as high as those of Amberlite XAD-4, which may be attributed to the unusual micropore structure and the partial polarity on the network. The values of the enthalpy (always negative) are indicative of an exothermic process, which manifests the adsorption of all the four phenolic compounds on the two polymeric adsorbents to be a process of physical adsorption. The negative values of free energy change show that the solute is more concentrated on the adsorbent than in the bulk solution. The absolute free energy values of adsorption for NJ-8 are always higher than those for Amberlite XAD-4, which indicates that phenolic compounds are preferentially adsorbed on NJ-8. The negative values of the adsorption entropy are consistent with the restricted mobilities of adsorbed molecules of phenolic compounds as compared with the molecules in solution. The adsorption entropy values of phenolic compounds for NJ-8 are lower than those for Amberlite XAD-4, which means the micropores of NJ-8 require more orderly arranged adsorbate.     

Agonist–PPARγ interactions: Molecular modeling study with docking approach

Docking simulation of 18 agonists with the ligand binding pocket (LBP) of PPARγ has been performed. The binding conformations and binding affinities of these agonists were obtained by use of the flexible docking protocol FlexX. Test compound calculations indicated that FlexX can reproduce the binding conformation of the crystal structure (root mean square deviation = 1.43 Å); moreover, the predicted binding affinities correlate well with the activities of these agonists. The interaction model and pharmacophore of PPARγ agonists were derived and the difference in biologic activities of these agonists can be well explained. The PPARγ agonists must have both polar head and the hydrophobic tail, which form hydrogen bonds and hydrophobic contacts with hydrophilic and hydrophobic regions of the LBP of PPARγ, respectively. In addition, a suitable linker is also necessary. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 405–410, 2003