三溴偶氮胂催化光度法测定痕量铁

本文研究了硫酸介质中痕量 Fe(Ⅲ)催化加速抗坏血酸、溴酸钾和三溴偶氮胂之间的褪色反应及动力学条件,建立了动力学光度法测定痕量Fe(Ⅲ)的新方法.方法灵敏度为1.82×10~(-12)g·ml~(-1).测定范围为Fe(Ⅲ)0～30ng/25ml.已用于人发和食品中痕量铁的测定.结果满意.     

Effect of nucleating agent on the structure and properties of polypropylene/poly(ethylene-octene) blends

The effect of the sorbital nucleating agent on properties of the ethylene-octene copolymer (POE) toughened polypropylene (PP) was studied. The results show that the addition of POE increases notched Izod and Charpy impact strength significantly but impair the tensile strength and flexural modulus. As a nucleating agent (1,3,2,4-di(p-methylbenzylidene) sorbitol, DM) was added, the toughness and stiffness of toughed PP increased simultaneously at the same content of POE. This result shows that the toughness and stiffness of toughed PP are in balance. Polarized light microscopy analysis shows that with the addition of POE and nucleating agent, only a low level of PP spherulites were observed.     

某些含二维液晶基元的热致液晶高分子的向列态纹影响构

发现某些含二维液晶基元的热致液晶高分子容易产生反向壁织构与含有高强度有错点（│Ｓ│大于１）的向列态纹影织构。这类液晶高分子的织构与形态学特点与含一维棒状液晶基元的其他液晶高分子不同。     

Preparation,stability and two-dimensional ordered arrangement of gold nanoparticles capped by surfactants with different chain lengths

Gold nanoparticles modified with C10NH2, C12NH2, C16NH2 and C18NH2 respectively have been prepared by the reverse micelle method. Nanoparticles stability and their two-dimensional (2D) ordered arrangement were studied by UV-Vis absorption spectra and LB technique. The factors, such as the chain length and the size distribution of particles, which affect the 2D ordered arrangement formation, are discussed. Experimental results show that the longer the chain length of surfactants capping the gold nanoparticles, the more stable the nanoparticles, and the more ordered 2D arrangement of gold nanoparticles.     

Formation of SnO2 Nanoparticles on External Surface of NaY Zeolite

Tin dioxide nanoparticles of 5 nm in size were prepared on NaY zeolite external surface by impregnation of SnCl2 solution and subsequent calcination at 623 K. A SnO2-NaY based chemical sensor for detecting H2 was demonstrated.     

利用DPN技术直接构建磁性纳米图形

在纳米尺度下构建有序的磁性模板和图形是当前的研究热点之一 [1,2 ] .这种模板在生物样品的分离[1] 、磁电子学研究和信息存储 [2 ] 等领域具有重要意义 .目前 ,光刻 [3] 、微触点印刷 [4 ] 和自组装 [5] 等多项技术已被用来构建各种纳米模板 .1 999年 ,美国西北大学 Mirkin小组 [6 ]发明的 Dip- pen纳米刻蚀技术 (简称 DPN技术 )更在可控组装方面显示出巨大优越性 .这项技术是在一定驱动力作用下 ,使吸附在原子力显微镜 ( AFM)针尖上的分子“墨水”逐渐转移到基底表面上 ,实现纳米模板的可控构建 .与传统技术相比 ,DPN技术可在纳米尺…     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

Effect of diluting agent on sensitivity in capillary electrophoresis with amperometric detection

Besides the running buffer, pH of buffer, separation voltage and sampling time, the diluting agent was studied in this paper as one of the important factors influencing the sensitivity in capillary electrophoresis (CE) with amperometric detection (AD) when electrokinectic sampling was used. Clonidine hydrochloride, hydrochlorothiazide and rutin, which are positively charged, neutral and negatively charged, respectively, in aqueous solutions, could be perfectly separated by CE with 25 mmol x L(-1) Na(2)B(4)O(7) - 50 mmol x L(-1) NaH(2)PO(4) as running buffer and detected by measuring their current responses with AD. Before CE running, some kinds of diluents including water, methanol, formamide, running buffer, hydrochloric acid and sodium hydroxide were, respectively, applied to dilute the stock solutions of above three analytes and their effects on the sensitivity of CE-AD were investigated. The results showed that for electrokinetic injection, the current responses of these three analytes were greatly affected in different ways when different diluting agents were used. This method was applied to simultaneously determine the active ingredients in one Chinese compound hypotensor named Zhen Ju Jiang Ya Pian, in which the contents of clonidine hydrochloride, hydrochlorothiazide and rutin is very different as 0.03 mg : 5 mg : 20 mg per tablet, and satisfactory results were obtained by adjusting their sensitivity by selecting the suitable diluting agent.     

Comparative study of electrochemically directed assembly versus conventional self-assembly of thioacetyl-terminated oligo(phenylene ethynylene)s on gold and platinum surfaces

The assembly of thioacetyl-terminated oligo(phenylene ethynylene)s (OPEs) on Au and Pt surfaces under an electric potential (electrochemical assembly, EA) was compared to assembly at an open circuit (conventional self-assembly, CSA). Cyclic voltammetry and ellipsometry were used to characterize the adsorption kinetics of self-assembled monolayers formed by these two techniques. The adsorption rate of the EA was remarkably faster at positive potentials but slower at negative potentials than that of the CSA, The EA at 400 mV proceeded about 800 times faster than the CSA when exposed to the same solution concentrations. The adsorption rates of both EA and CSA were found to be dependent on the molecular structures of OPEs. OPEs containing electron-donating groups assemble faster than those with electron-withdrawing groups. The amount of time that the thioacetyl-terminated OPE is in the presence of the base, for removal of the acetyl group to generate the thiolate, is called the deprotection time. Deprotection times play a critical role in achieving the maximum difference in adsorption rates between the EA and the CSA. The assembly must be initiated no later than 5 min after the basic deprotection is commenced so that the thiolate concentration remains low. The difference in the adsorption rates between EA and CSA might enable selective deposition of certain OPEs onto specific electrodes.     

固载Ru基催化剂上二氧化碳加氢合成甲酸Ⅱ反应条件对催化剂性能的影响

The synthesis of formic acid from carbon dioxide and hydrogen using a silica immobilized ruthenium catalyst as precursor has been studied in different reaction conditions. The results revealed that the TOF （turn over frequency） of HCOOH achieved 1481.5 h^-1 on immobilized ruthenium catalyst near the critical pressure point of CO2 with H2 pressure of 4.0 MPa, reaction temperature of 80℃ and PPh3/Ru molar ratio of 6：1. The reaction activity of immobilized catalyst was higher than that of homogeneous catalyst, and the immobilized catalyst also offered the practical advantages such as easy separation and reuse.