Determination of phenolic compounds and authentication of PDO Lambrusco wines by HPLC-DAD and chemometric techniques

This work proposes a fast and simple method for detection and quantification of phenolic compounds in PDO Lambrusco wines using HPLC-DAD and chemometric techniques. Samples belonging to three different varieties of Lambrusco (Grasparossa, Salamino and Sorbara) were analyzed to provide a methodology appropriate for routine analysis. Given the high complexity of the sample and the coelution among chromatographic peaks, the use of chemometric techniques to extract the information of the individual eluting compounds was needed. Multivariate curve resolution-alternating least squares (MCR-ALS) allowed the resolution of the chromatographic peaks obtained and the use of this information for the quantification of the phenolic analytes in the presence of interferences. Use of multiset analysis and local rank/selectivity information was proven to be crucial for the correct resolution and quantification of compounds. The quantitative data provided by MCR-ALS about the phenolic targets and additional compounds present in the samples analyzed provided wine composition profiles, which were afterwards used to distinguish among wine varieties. Principal component analysis applied to the wine profiles allowed characterizing the wines according to their varieties.     

BEHAVIOR OF ANIONIC SURFACTANT MICELLES IN THE PRESENCE OF Al3+ AND Ca2+

The estimation of the C-potential of ionic surfactant micelles may be useful for the study of adsorption of solutes onto the micellar surface, which causes a reduction of the net electrostatic charge. This work presents results on the variation of ζ-potential of alkylsulfate and fatty carboxylate micelles with the bulk concentrations of Al³⁺ and Ca²⁺ cations. Combined with results from the literature about the effect of micellar surfactant concentration on reducing surfactant precipitation in the presence of polyvalent cations, these allow to conclude that micelles of anionic surfactants will have a higher chance of electroneutralization of their surface charge by adsorbing cations if the end functional group of the surfactant is smaller.     

Wetting behavior of pulmonary surfactant aqueous solutions

The wetting properties of pulmonary surfactant aqueous solutions with respect to solid surfaces with different degree of hydrophobicity have been studied. The contact angles θ of drops from a pulmonary surfactant solution onto SiO₂-glass surfaces have been measured as a function of their degree of hydrophobicity θ _w. The completely hydrophilic SiO₂-glass surface is essentially hydrophobized by the animal-derived pulmonary surfactant Curosurf. The hydrophobization depends on the surfactant concentration—the contact angles increase with increasing the Curosurf concentration C _s in the low concentration range, but they remain almost constant in a wide range of C _s >90 μg/ml. Additions like NaCl and bovine serum albumin influence the θ-values. The contact angles θ naturally increase with increasing θ _w but this dependence is not linear—the curve steepens at larger θ _w values. The thickness h of the wetting thin liquid films from Curosurf aqueous solutions depends on the hydrophobicity θ _w of the solid surface and the h(θ _w) curves always pass a minimum. The h-values, as well as the h(θ _w) curve, are mainly determined by the steric and hydrophobic disjoining pressures, which depend on the orientations and conformations of the molecules adsorbed on the solid surface from the very complicated multi-component aqueous solutions.     

Bovine lactoferrin purification from whey using Yellow HE‐4R as the chromatographic affinity ligand

The worldwide production of whey increases by around 186 million tons each year and it is generally considered as a waste, even when several whey proteins have important economic relevance. For its valorization, inexpensive ligands and integrated chromatography methods need to be developed for specific and low‐cost protein purification. Here, we describe a novel affinity process with the dye Yellow HE‐4R immobilized on Sepharose for bovine lactoferrin purification. This approach based on a low‐cost ligand showed an efficient performance for the recovery and purification of bovine lactoferrin directly from whey, with a yield of 71% and a purification factor of 61.     

Applications of Approximation Theory to thermographic images in earthquake engineering

In this paper we show some new applications of the approximation theory, by means of the multivariate sampling Kantorovich operators, to thermographic images in seismic engineering. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

q value and parent energy optimization using a low-voltage ionization approach increases resolution in linear ion trap mass spectrometry

In this work, the isolation step in the linear ion trap was performed using different “q values” conditions at a low collision-induced dissociation (CID) energy leading to the parent ion resolution improvements, reasonably due to better ion energy distribution. According to the results, we obtained a greater resolution and mass accuracy operating in both traditional electrospray and low voltage ionization near the q value = 0.778 and with a CID energy of 10%. This effect was evaluated with low-molecular-mass compounds (skatole and arginine). The proposed optimization yielded a superior instrument performance without adding technological complexity to mass spectrometry analyses.     

H/D Exchange Processes in Flavonoids: Kinetics and Mechanistic Investigations

Several classes of flavonoids, such as anthocyanins, flavonols, flavanols, and flavones, undergo a slow H/D exchange on aromatic ring A, leading to full deuteration at positions C(6) and C(8). Within the flavanol class, H-C(6) and H-C(8) of catechin and epicatechin are slowly exchanged in D₂O to the corresponding deuterated analogues. Even quercetin, a relevant flavonol representative, shows the same behaviour in a D₂O/DMSOd₆ 1:1 solution. Detailed kinetic measurements of these H/D exchange processes are here reported by exploiting the time-dependent changes of their peak areas in the ¹H-NMR spectra taken at different temperatures. A unifying reaction mechanism is also proposed based on our detailed kinetic observations, even taking into account pH and solvent effects. Molecular modelling and QM calculations were also carried out to shed more light on several molecular details of the proposed mechanism.     

Wet-Chemically Prepared Porphyrin Layers on Rutile TiO2(110)

Porphyrins are large organic molecules that are interesting for different applications, such as photovoltaic cells, gas sensors, or in catalysis. For many of these applications, the interactions between adsorbed molecules and surfaces play a crucial role. Studies of porphyrins on surfaces typically fall into one of two groups: (1) evaporation onto well-defined single-crystal surfaces under well-controlled ultrahigh vacuum conditions or (2) more application-oriented wet chemical deposition onto less well-defined high surface area surfaces under ambient conditions. In this study, we will investigate the wet chemical deposition of 5-(monocarboxyphenyl)-10,15,20-triphenylporphyrin (MCTPP) on well-defined rutile TiO₂(110) single crystals under ambient conditions. Prior to deposition, the TiO₂(110) crystals were also cleaned wet-chemically under ambient conditions, meaning none of the preparation steps were done in ultrahigh vacuum. However, after each preparation step, the surfaces were characterized in ultrahigh vacuum with X-ray photoelectron spectroscopy (XPS) and the result was compared with porphyrin layers prepared in ultrahigh vacuum (UHV) by evaporation. The differences of both preparations when exposed to zinc ion solutions will also be discussed.     

Comprehensive model of electromigrative transport in microfluidic paper based analytical devices

A complete mathematical model for electromigration in paper-based analytical devices is derived, based on differential equations describing the motion of fluids by pressure sources and EOF, the transport of charged chemical species, and the electric potential distribution. The porous medium created by the cellulose fibers is considered like a network of tortuous capillaries and represented by macroscopic parameters following an effective medium approach. The equations are obtained starting from their open-channel counterparts, applying scaling laws and, where necessary, including additional terms. With this approach, effective parameters are derived, describing diffusion, mobility, and conductivity for porous media. While the foundations of these phenomena can be found in previous reports, here, all the contributions are analyzed systematically and provided in a comprehensive way. Moreover, a novel electrophoretically driven dispersive transport mechanism in porous materials is proposed. Results of the numerical implementation of the mathematical model are compared with experimental data, showing good agreement and supporting the validity of the proposed model. Finally, the model succeeds in simulating a challenging case of free-flow electrophoresis in paper, involving capillary flow and electrophoretic transport developed in a 2D geometry.     

Chemical promenades: Exploring potential-energy surfaces with immersive virtual reality

The virtual-reality framework AVATAR (Advanced Virtual Approach to Topological Analysis of Reactivity) for the immersive exploration of potential-energy landscapes is presented. AVATAR is based on modern consumer-grade virtual-reality technology and builds on two key concepts: (a) the reduction of the dimensionality of the potential-energy surface to two process-tailored, physically meaningful generalized coordinates, and (b) the analogy between the evolution of a chemical process and a pathway through valleys (potential wells) and mountain passes (saddle points) of the associated potential energy landscape. Examples including the discovery of competitive reaction paths in simple A + BC collisional systems and the interconversion between conformers in ring-puckering motions of flexible rings highlight the innovation potential that augmented and virtual reality convey for teaching, training, and supporting research in chemistry.