Multi-walled Carbon Nanotubes and Gold Nanorod Decorated Biosensor for Detection of microRNA-126

In this article, we introduced a novel electrochemical biosensor for the detection of microRNA-126. The biosensor utilizes a hybridization assay combined with multi-walled carbon nanotubes and gold nanorod-decorated screen-printed carbon electrodes. For electrode preparation, gold nanorods were first immobilized onto the surface of bare and multi-walled carbon nanotube-modified screen-printed carbon electrodes, and the thiol tagged-capture probe was immobilized on the electrode surface through gold and thiol group interaction. After the immobilization, thiol tagged-capture probe hybridized with the target sequence. Under optimum conditions, we determined limit of detection (LOD) and limit of quantification (LOQ) as high as 11 nM and 36 nM, respectively.     

Production of textile filaments from carboxymethylated cellulosic pulps

Cellulose - Textile filaments were fabricated from a solution obtained from carboxymethylated cellulose dissolved in aqueous NaOH solution, by wet spinning in an acid coagulation bath. Spinning is...     

Improving the sensitivity of cellulose fiber-based lateral flow assay by incorporating a water-dissolvable polyvinyl alcohol dam

Cellulose - Lateral flow assay (LFA) is an important point-of-care (POC) test platform due to the associated portability, on-site testing, and low cost for diagnosis of pathogen infections and...     

Investigating microcrystalline cellulose crystallinity using Raman spectroscopy

Cellulose - Microcrystalline cellulose (MCC) is a semi-crystalline material with inherent variable crystallinity due to raw material source and variable manufacturing conditions. MCC crystallinity...     

Fabrication of a Single Layer and Bilayer Potentiometric Biosensors for Penicillin by Galvanostatic Entrapment of Penicillinase into Polypyrrole Films

A single layer and bilayer potentiometric biosensors for the detection of penicillin have been developed. The favourable conditions that were established for the polypyrrole‐penicillinase ((PPy‐P’nase) single layer biosensor were 0.03 M pyrrole, 50 U/mL P’nase, 0.01 M penicillin, applied current density of 0.9 mA/cm² and a polymerisation time of 40 s. The optimum conditions for the formation of the outer layer of the bilayer were: (a) 0.1 M Py, 19 U/mL P’nase, 0.01 M pen, current density of 0.9 mA/cm² and a polymerisation time of 40 s. The minimum detectable penicillin concentration with the bilayer potentiometric biosensor was 0.3 µM and the linear concentration range was 7.5–146 µM. The average percentage recovery of penicillin that was found in amoxycillin 500 mg was 113±24 %. The determination of penicillin in milk was fraught with problems of non‐specific binding of penicillin to the milk.     

Fabrication of Sensitive Potentiometric Cholesterol Biosensor Based on Co3O4 Interconnected Nanowires

Highly sensitive, selective, reliable and inexpensive cholesterol biosensors are highly demanded for the routine monitoring of cholesterol molecules in order to prevent heart failure incidents. In this study, Co₃O₄ nanostructures are synthesized using polyvinyl pyrrolidone surfactant as growth template by a low temperature aqueous chemical growth method. The morphology of nanostructures was investigated by scanning electron microscopy and X‐ray diffraction techniques. The nanostructures exhibit interconnected nanowires like morphology with interconnected network of nanowires. The nanostructures of Co₃O₄ are polycrystalline. The cholesterol oxidase was physically adsorbed on the interconnected nanowires of Co₃O₄ for the chemical sensing of cholesterol molecules. The sensor device detected a wide range of cholesterol from 1×10^?7 M to 1×10^?3 M concentrations with sensitivity of ?94.031 mV/decade. A detection limit of 0.035×10^?7 M cholesterol concentration was observed and a fast response time of 10 s was also noticed. The fabricated device is highly stable, selective, sensitive, reproducible and repeatable. All the collected information about presented cholesterol biosensor indicates its potential application for the monitoring of cholesterol concentrations from human blood serum and real‐life samples.     

Analytical method development and validation of anticancer agent, 5-fluorouracil,and its metabolites in biological matrices: An updated review

Abstract

5-fluorouracil (5-FU) refers to a fluorinated pyrimidine analogue that has been widely used as an anticancer agent for colon, head, and neck cancers. Detection of 5-FU and its metabolites; 5-fluorouridine and 5-fluoro-2-deoxyuridine in biological samples allows optimization of pharmacotherapy and encourages fundamental investigations of this medication. The development of accurate and reliable sample preparation, as well as analytical methods, is critical to isolate targeted analytes from complex matrices, apart from increasing detection sensitivity of analytes. With that, this paper presents a review of prior studies pertaining to chromatographic and electrophoretic methods that focused on the analysis of 5-FU and its metabolites in biological matrices such as plasma and urine. This paper concentrates on HPLC, GC and CE systems, which are the most commonly used strategies for analytical separation of 5-FU and its metabolites from samples. Detection of these antineoplastic agents at trace level demands highly sensitive and selective analytical methodologies. Application of these analytical techniques to biological matrices is reviewed with a focus on method development strategies, including types of mobile phases and background electrolytes employed in LC and CE systems.     

Synthesis,antioxidant and antimicrobial properties of novel pyridyl-carbonyl thiazoles as dendrodoine analogs

Marine compound dendrodoine was first obtained from tunicate species ( Dendrodo grossularia ). It has a five-membered ring, namely, it is a heterocycle thiadiazole, which is found rarely in natural sources . Following its biological activities, novel analogs have been investigated recently. Synthesis of the analogs for this study is realized with uncommon thiazole closure, including methylene-carbonyl condensation. Structures are elucidated by NMR ( ¹ , ¹³ C) and HRMS spectrums. As an alkaloid derivative, antioxidant properties were evaluated with DPPH and FRAP assays and antimicrobial effect with microdilution method. Among the series, 3bc-3cf showed higher antioxidant activity than those having 3 or 4-pyridyl substituents. There is lesser activity for 2-pyridyl activity for 2-pyridyl containing group, which may be a result of intramolecular interactions. No activity was observed against gram-negative bacteria at 250 μg/mL. 3ae and 3ce showed activity at 64 μg/mL against S. aureus and 3ae showed activity at 16 μg/mL against S. epidermidis gram-positive bacteria. Chloramphenicol showed activity against all microorganisms at 8–16 μg/mL. Sixteen original dendrodoine analogs have been defined by close/higher activity compared to dendrodoine analogs and Trolox.     

Characterization and kinetics analysis of the thermal decomposition of the humic substance from hazelnut husk

A humic substance was obtained from hazelnut husk using an alkali extraction. The chemical and morphological structure of the humic matter was characterized via elemental analysis, Fourier transform infrared spectrometry (FTIR), nuclear magnetic resonance, Brunauer-Emmet-Teller (BET) analysis, scanning electron microscopy (SEM), and thermogravimetric-FTIR (TG-FTIR). In addition, thermal analysis measurements TG analysis-differential thermogravimetry/differential scanning calorimetry (TGA-DTG/DSC) were performed under dynamic air conditions to better determine the origin, physical and chemical structure, and decomposition process of the humic matter. The Kissinger-Akahira-Sunose (KAS) and Flynn-Wall-Ozawa (FWO) methods were used to calculate the kinetic parameters of the high-temperature decomposition process. It was observed that the activation energy values were almost constant at certain conversion and temperature intervals. In addition, the structure of the humic substance at different temperatures was also investigated via FTIR analysis. It was found that the obtained humic substance had a very stable structure and decomposed at a high temperature. The stability of the humic matter can be a useful tool in the environmental quality research of soil.