Fourier optics analysis of grating sensors with tilt errors

Dynamic diffraction gratings can be microfabricated with precision and offer extremely sensitive displacement measurements and light intensity modulation. The effect of pure translation of the moving part of the grating on diffracted order intensities is well known. This study focuses on the parameters that limit the intensity and the contrast of the interference. The effects of grating duty cycle, mirror reflectivities, sensor tilt and detector size are investigated using Fourier optics theory and Gaussian beam optics. Analytical findings reveal that fringe visibility becomes <0.3 when the optical path variation exceeds half the wavelength within the grating interferometer. The fringe visibility can be compensated by monitoring the interfering portion of the diffracted order light only through detector size reduction in the expense of optical power. Experiments were conducted with a grating interferometer that resulted in an eightfold increase in fringe visibility with reduced detector size, which is in agreement with theory. Findings show that diffraction grating readout principle is not limited to translating sensors but also can be used for sensors with tilt or other deflection modes.     

Temperature independent length optimization of L-band EDFAs providing flat gain

In this study, single stage (SS), double-stage (DS), and gain flattened (GF) DS L-band erbium-doped fiber amplifier (EDFA) configurations are designed in order to obtain a flat gain amplifier. Temperature dependence of the mentioned configurations is also analyzed. Maximum spectral dependence of EDFA gain with respect to temperature is obtained for SS EDFA design while smaller spectral dependence of gains is obtained for both DS and GF DS L-EDFA configurations. It is observed that the maximum temperature dependence is in the range of 1570-1580 nm band for all configurations. It has also been found that for all configurations, reducing the temperature has greater effect than raising the temperature on EDFA gain. The overall results show that a temperature independent L-band configuration has not been possible. However, for some signal wavelengths, the erbium-doped fiber (EDF) lengths at which the gain is temperature independent are observed.     

Effect of a buffer layer between the shell and ligand on the optical properties of an exciton and biexciton in type-II quantum dot nanocrystals

In this study, we have investigated the effect of the buffer layers on the electronic and optical properties of an exciton (X) and a biexciton (XX) in a type-II CdTe/CdSe quantum dot nanocrystal. In an experimental study, it has been reported that when a CdTe/CdSe quantum dot nanocrystal is coated by a ZnTe material as a buffer layer, the photoluminescence quantum yield is growing from 4 to 20%. We have confirmed theoretically this improvement and extended the calculations to an XX structure. In the calculations, two different semiconductor materials, CdS and ZnTe, have been considered for the buffer layer. We have theoretically shown that the buffer layer causes an increase in the radiative oscillator strength of both X and XX. When the ZnTe is used as the buffer layer, the oscillator strength becomes stronger when compared to CdSe buffer material because of higher conduction band offset between CdSe and ZnTe.     

Computational Studies on the Ground State Tautomer,Hydrogen Conformations and Vibrational Spectroscopic Analysis of Antitumor Agents:3-Deazauracil and 6-Azauracil

The ground state hydrogen conformations and vibrational analysis of 3-deazauracil (3DAU) and 6-azauracil (6AU) tautomers (4-enol and 2,4-diol forms) have been calculated using ab initio Hartree-Fock (HF) and density functional theory (B3LYP) methods with 6-311++G(d,p) basis set level. The calculations have shown that the most probably preferential tautomer of 3DAU and 6AU are the 4-enol form, which gives best fit to the corresponding experimental data. The ground state conformer of the 2,4-diol form has two O-H bonds which are oriented externally and internally (to the N-H bond). The vibrational analyses of the ground state conformer of each tautomeric form of 3DAU and 6AU were done and their optimized geometry parameters (bond lengths and bond angles) were given. Furthermore, from the correlations values it was concluded that the B3LYP method is superior to the HF method for both the vibrational frequencies and the geometric parameters.     

The effects of the intense laser field on the optical properties of the asymmetric parabolic quantum well

We have calculated the effects of the intense laser field on the total optical absorption coefficient (the linear and third-order nonlinear) for transition between two lower-lying electronic levels in the asymmetric parabolic \({\text{GaAs/ Ga}}_{{ 1 {\text{ - x}}}} {\text{Al}}_{\text{x}} {\text{As}}\) quantum well. Total absorption coefficient (linear and nonlinear absorption coefficient) for the transitions between any two electronic states was calculated by using density matrix formalism and the perturbation expansion method. Our results show that the effects of intense laser field and the well dimensions on the optical transitions are more pronounced. If well center is changed to be \({\text{L}}_{\text{c}} < 0 \, ({\text{L}}_{\text{c}} > 0)\), effective well width decreases (increases) and thus we can obtain the red or blue shift in the peak position of the absorption coefficient by changing the intensities of the non-resonant intense laser field as well as dimensions of the well.     

A novel synthesis of (3,6-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-9-(4-vinylbenzyl)-9H-carbazole), alternating polymer formation, characterization, and capacitance measurements

In this work, (3,6-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-9-(4-vinylbenzyl)-9H-carbazole) (EDOTVBCz) comonomer was chemically synthesized and characterized by Fourier transform infrared (FTIR), proton nuclear magnetic resonance, and carbon nuclear magnetic resonance spectroscopy. EDOTVBCz was electrocoated on glassy carbon electrode (GCE) in various initial molar concentrations ([EDOTVBCz]₀?=?1.0, 1.5, 2.0, and 3.0) in 0.1 M lithium perchlorate (LiClO₄)/acetonitrile (CH₃CN). P(EDOTVBCz)/GCE was characterized by cyclic voltammetry, FTIR reflectance-attenuated total reflection spectroscopy, scanning electron microscopy–energy dispersive X-ray analysis, atomic force microscopy, and electrochemical impedance spectroscopy (EIS). EIS was used to determine the capacitive behaviors of modified GCE via Nyquist, Bode magnitude, Bode phase, and admittance plots. The highest low-frequency capacitance value was obtained as C _LF?=?～2.35 mF cm^?2 for [EDOTVBCz]₀?=?3.0 mM. Double-layer capacitance of the polymer/electrolyte system was calculated as C _dl?=?～2.78 mF cm^?2 for [EDOTVBCz]₀?=?1.0 and 3.0 mM. The maximum phase angle was obtained as θ?=?～76.7^o for [EDOTVBCz]₀?=?1.0, 1.5, 2.0, and 3.0 mM at the frequency of 20.6 Hz. AC impedance spectra of P(EDOTVBCz)/LiClO₄/CH₃CN was obtained by performing electrical equivalent circuit model of R(Q(R(CR))) with linear Kramers–Kronig test.

Quantum Computational Investigation of (E)-1-(4-methoxyphenyl)-5-methyl-N′-(3-phenoxybenzylidene)-1H-1,2,3-triazole-4-carbohydrazide

The title compound was synthesized and structurally characterized. Theoretical IR, NMR (with the GIAO technique), UV, and nonlinear optical properties (NLO) in four different solvents were calculated for the compound. The calculated HOMO–LUMO energies using time-dependent (TD) DFT revealed that charge transfer occurs within the molecule, and probable transitions in the four solvents were identified. The in silico absorption, distribution, metabolism, and excretion (ADME) analysis was performed in order to determine some physicochemical, lipophilicity, water solubility, pharmacokinetics, drug-likeness, and medicinal properties of the molecule. Finally, molecular docking calculation was performed, and the results were evaluated in detail.     

Surface-induced self-assembly of dipeptides onto nanotextured surfaces

There is an increasing interest for the utilization of biomolecules for fabricating novel nanostructures due to their ability for specific molecular recognition, biocompatibility, and ease of availability. Among these molecules, diphenylalanine (Phe-Phe) dipeptide is considered as one of the simplest molecules that can generate a family of self-assembly based nanostructures. The properties of the substrate surface, on which the self-assembly process of these peptides occurs, play a critical role. Herein, we demonstrated the influence of surface texture and functionality on the self-assembly of Phe-Phe dipeptides using smooth silicon surfaces, anodized aluminum oxide (AAO) membranes, and poly(chloro-p-xylylene) (PPX) films having columnar and helical morphologies. We found that helical PPX films, AAO, and silicon surfaces induce similar self-assembly processes and the surface hydrophobicity has a direct influence for the final dipeptide structure whether being in an aggregated tubular form or creating a thin film that covers the substrate surface. Moreover, the dye staining data indicates that the surface charge properties and hence the mechanism of the self-assembly process are different for tubular structures as opposed to the peptidic film. We believe that our results may contribute to the control of surface-induced self-assembly of peptide molecules and this control can potentially allow the fabrication of novel peptide based materials with desired morphologies and unique functionalities for different technological applications.     

Vinyl nosylates as partner in copper and silver co-catalyzed Sonogashira cross-coupling reactions

Vinyl nosylates, readily obtained from β-dicarbonyl derivatives, could be efficiently engaged in Sonogashira cross-coupling reactions, either cocatalyzed by copper or silver salts. The para-nitrobenzenesulfonate (nosylate) group allows this coupling to be performed under very mild conditions (room temperature). These new leaving group and mild conditions could be applied to the synthesis of acetylenic coumarinyl derivatives and to the total synthesis of an acetylenic monoterpene natural product, named cleviolide.     

Selective synthesis of 2,6-triad dimethylnaphthalene isomers by disproportionation of 2-methylnaphthalene over mesoporous MCM-41

2,6-Dimethylnaphthalene (2,6-DMN) is one of the crucial intermediates for the synthesis of polybutylenenaphthalate and polyethylene naphthalate (PEN). The complex synthesis procedure and the high cost of 2,6-DMN production significantly reduce the commercialisation of PEN even though PEN demonstrates superior properties compared with polyethylene terephthalate. 2,6-DMN can be produced by methylation of 2-methylnaphthalene (2-MN) and/or naphthalene, disproportionation of 2-MN, and/or isomerisation of dimethylnaphthalenes (DMNs). In this study, synthesis of 2,6-triad DMN isomers consisting of 2,6-DMN, 1,6-DMN, and 1,5-DMN have been investigated with the disproportionation of 2-MN over unmodified and Zr-modified mesoporous MCM-41 zeolite catalysts. In contrast to other DMN isomers, both 1,5-DMN and 1,6-DMN can be effectively isomerised to be profitable 2,6-DMN. The disproportionation of 2-MN experiments were carried out in a catalytic fixed-bed reactor in the presence of 1 g of catalyst at a temperature range of 350–500 °C and weight hourly space velocity between 1 to 3 h^?1. The results demonstrated that mesoporous MCM-41 zeolite catalyst has a selective pore shape for 2,6-triad DMN isomers, which may allow a decrease in the production cost of 2,6-DMN. Additionally, 2,6-DMN was successfully synthesised by the disproportionation of 2-MN over MCM-41 zeolite catalyst. Furthermore, both the conversion of 2-MN and the selectivity of 2,6-DMN were considerably enhanced by the Zr impregnation on MCM-41.