The membranous contact quotient: A new phonatory measure of glottal competence

The membranous contact quotient (MCQ) is introduced as a measure of dynamic glottal competence. It is defined as the ratio of the membranous contact glottis (the anterior-posterior length of contact between the two membranous vocal folds) and the membranous vocal fold length. An elliptical approximation to the vocal fold contour during phonation was used to predict MCQ values as a function of vocal process gap (adduction), maximum glottal width, and membranous glottal length. MCQ is highly dependent on the vocal process gap and the maximum glottal width, but not on vocal fold length. Five excised larynges were used to obtain MCQ data for a wide range of vocal process gaps and maximum glottal widths. Predicted and measured MCQ values had a correlation of 0.93, with an average absolute difference of 9.6% (SD = 10.5%). The model is better at higher values of MCQ. The theory for MCQ is also expressed as a function of vocal process gap and subglottal pressure to suggest production control potential. The MCQ measure is obtainable with the use of stroboscopy and appears to be a potentially useful clinical measure.     

Mixed mode axisymmetric annular cracks in a finite layer: Off angle crack initiation

The solutions of axisymmetric Volterra type climb and glide edge dislocations are obtained in a layer by means of the Hankel transforms. Utilizing the same procedure, Green’s function solution is obtained for a layer under self-equilibration normal ring traction. The distributed dislocation technique is used to construct integral equations for a system of co-axial annular cracks where the layer is under axisymmetric normal loads. These equations are solved numerically to obtain dislocation density on the cracks surfaces. The results are employed to determine stress intensity factors for annular and penny-shaped cracks and the interaction between two co-axial penny-shaped cracks is studied. Moreover, the stress intensity factors of the interacting cracks are determined such that they can be further used in conjunction with strain energy density (SED) failure criterion to obtain the possible direction of crack initiation that may not be apparent under mixed mode conditions.     

Fabrication of poly(ϵ-caprolactone)/paclitaxel (core)/chitosan/zein/multi-walled carbon nanotubes/doxorubicin (shell) nanofibers against MCF-7 breast cancer

In the present study, paclitaxel (PTX), multi-walled carbon nanotubes (MWCNTs), and doxorubicin (DOX) have been simultaneously doped into the poly(ϵ-caprolactone) (PCL)/chitosan/zein core-shell nanofibers to increase its cytotoxicity for MCF-7 breast cancers killing. The physico-chemical properties of synthesized nanofibers were determined by scanning electron microscope, Fourier-transform infrared spectroscopy, tensile strength, and degradation rate determinations. The in vitro release studies demonstrated the sustained release of drugs from core-shell nanofibrous scaffold. The cytotoxicity and compatibility of core-shell nanofibers were investigated by their treating with MCF-7 breast cancer cells and L929 normal cells, respectively. PCL/PTX/chitosan/zein/MWCNTs/DOX core-shell nanofibers containing 1 wt% MWCNTs, 100 μg ml⁻¹ DOX and 100 μg ml⁻¹ PTX had a high biocompatibility with a 84% MCF-7 cancer cells killing. The in vivo studies revealed the synergic effects of MWCNTs and anticancer drugs on the tumor inhibition. This method could be considered as a new way for developing of MWCNTs loaded-nanofibers for cancer treatment in future.     

A New Quantum Gray-Scale Image Encoding Scheme

In this paper, a new quantum images encoding scheme is proposed. The proposed scheme mainly consists of four different encoding algorithms. The idea behind of the scheme is a binary key generated randomly for each pixel of the original image. Afterwards, the employed encoding algorithm is selected corresponding to the qubit pair of the generated randomized binary key. The security analysis of the proposed scheme proved its enhancement through both randomization of the generated binary image key and altering the gray-scale value of the image pixels using the qubits of randomized binary key. The simulation of the proposed scheme assures that the final encoded image could not be recognized visually. Moreover, the histogram diagram of encoded image is flatter than the original one. The Shannon entropies of the final encoded images are significantly higher than the original one, which indicates that the attacker can not gain any information about the encoded images.     

Dynamic glottal pressures in an excised hemilarynx model

During phonation, air pressures act upon the vocal folds to help maintain their oscillation. The air pressures vary dynamically along the medial surface of the vocal folds, although no live human or excised studies have shown how those pressure profiles vary in time. The purpose of this study was to examine time-dependent glottal pressure profiles using a canine hemilarynx approach. The larynx tissue was cut in the midsaggital plane from the top to about 5 mm below the vocal folds. The right half was replaced with a Plexiglas pane with imbedded pressure taps. Simultaneous recordings were made of glottal pressure signals, subglottal pressure, particle velocity, and average airflow at various levels of adduction. The data indicate that the pressures in the glottis (on the Plexiglas) vary both vertically and longitudinally throughout the phonatory cycle. Pressures vary most widely near the location of maximum vibratory amplitude, and can include negative pressures during a portion of the cycle. Pressures anterior and posterior to the maximum amplitude location may have less variation and may remain positive throughout the cycle, giving rise to a new concept called dynamic bidirectional pressure gradients in the glottis. This is an important concept that may relate strongly to tissue health as well as basic oscillatory mechanics.     

Conversion of Isoeugenol to Vanillin by <Emphasis Type="Italic">Psychrobacter</Emphasis> sp. Strain CSW4

To screen strains of halotolerant or halophile bacteria which are able to convert isoeugenol to vanillin, 36 different strains of bacteria isolated from the salty environments in Iran were investigated. During growth on isoeugenol, a moderately halotolerant Gram-negative coccobacil showed capability of converting isoeugenol to vanillin. Based on morphological, physiological, and phylogenetic studies, strain CSW4 was classified as a bacterium belonging to the genus Psychrobacter. The bioconversion products were confirmed by thin-layer chromatography, high-performance liquid chromatography, and spectral data obtained from UV/Vis spectroscopy, FTIR, and mass-spectroscopy. Using growing cells, vanillin reached its maximum level of 88.18 mg L⁻¹ after 24 h of reaction time in the presence of 1 g L⁻¹ isoeugenol, resulting in a molar yield of 10.2%. The use of resting cells led to the optimal yield of vanillin (16.4%) which was obtained after 18-h reaction using 1 g L⁻¹ isoeugenol and 3.1 g of dry weight of cells per liter harvested at the end of the exponential growth phase. To improve vanillin yield, the effect of substrate concentration on vanillin production under resting cells conditions was also investigated. Using 10 g L⁻¹ isoeugenol, the maximal vanillin concentration (1.28 g L⁻¹) was achieved after a 48-h reaction, without further optimization. The present study brings the first evidence for biotransformation of isoeugenol to vanillin in the genus Psychrobacter.     

Separation of B6 vitamers with micellar liquid chromatography using UV and electrochemical detection

Separation of six vitamers of vitamin B6 was performed by RP-HPLC using micellar mobile phase, UV and electrochemical detection. Effect of temperature, type and amount of organic modifier in mobile phase on efficiency and asymmetry factor showed that, the appropriate conditions were temperature of 35 degrees C and 3.0-5.0% (v/v) 1-butanol in mobile phase. Variations of selectivity factor versus 1-butanol concentration, pH of mobile phase, and SDS concentration was investigated and the following optimized conditions were selected for the separation: 3.0% (v/v) 1-butanol, pH=5.5 and 65 mM SDS in mobile phase. Electrochemical behavior of vitamers in optimized mobile phase was investigated using cyclic voltammetry, and potential of +1.2 V versus Ag/AgCl(Sat.) was chose as working potential. Finally, separation of B6 vitamers using UV detection at 254 nm and electrochemical detection at +1.2 V was compared.     

Viscoelastic fluid behavior in annulus using Giesekus model

An analytical solution is derived for the steady state, laminar, axial, fully developed flow of a viscoelastic fluid obeying the Giesekus model without any retardation time in a concentric annulus.An approximation is used for the estimation of radial normal stress. The influence of Deborah number (De) and the mobility factor (α) on the velocity profile, axial pressure gradient are investigated and results show strong effects of mobility factor and Deborah number on above parameters.     

Flexible job shop scheduling with overlapping in operations

In this paper, flexible job shop scheduling problem with a new approach, overlapping in operations, is discussed. In many flexible job shops, a customer demand can be released more than one for each job, where demand determines the quantity of each finished job ordered by a customer. In these models each job has a demand more than one. This assumption is an important and practical issue for many flexible job shops such as petrochemical industries. To consider this assumption, we use a new approach, named overlapping in operations. In this approach, embedded operations of each job can be performed due to overlap considerations in which each operation may be overlapped with the others because of its nature. The overlapping is limited by structural constraints, such as the dimensions of the box to be packed or the capacity of the container used to move the pieces from one machine to the next. Since this problem is well known as NP-Hard class, a hierarchical approach used simulated annealing algorithm is developed to solve large problem instances. Moreover, a mixed integer linear programming (MILP) method is presented. To evaluate the validity of the proposed SA algorithm, the results are compared with the optimal solution obtained with the traditional optimization technique (The Branch and Bound method). The computational results validate the efficiency and effectiveness of the proposed algorithm. Also the computational results show that the overlapping considering can improve the makespan and machines utilization measures. So the proposed algorithm can be applied easily in real factory conditions and for the large size problems and it should thus be useful to both practitioners and researchers.