The Synthesis and Application of the Mesoporous Molecular Sieves MCM-41 — A Review

We report a “delayed neutralization” process for the preparation of highly-ordered aluminosilicate MCM-41 molecular sieves with high thermal and hydrothermal stability, and sharp pore size distribution. However, the structural order and pore size are dependent on the carbon chain length. In the mixture surfactant systems, the pore size of the MCM-41 materials could be fine-tuned. The pore size can be extended from 2.5 to 4.5 nm by adding a suitable amount of hydrocarbons. The tubular morphology of the MCM-41 material of 0.3 to 10 micrometers diameter, where the wall consists of coaxial cylindrical pores of nanometers MCM-41, can be obtained by careful control of the surfactant-water content and the rate of condensation of silica. An optimum condition for automatic synthesis of the hierarchical TWT structure has been accomplished. The addition of 1-alkanols as cosurfactant would not only improve the order of the MCM-41 hexagonal structure but also promote the formation of micrometer-sized hierarchical materials, for example: tubules-within-tubule and uniform-sized hollow spheres of diameter 5.0 ± 1.0 μm. However, the inside of the micron spheres has intricate structures possessing various topological genus ranks. The MCM-41 is a good supporter for Molybdenum oxide catalysts. The rate of deactivation in the catalytic reaction of ethyl-benzene dehydrogenation to styrene increases in the order: M_T < M_P < SiO₂. The physically mixed samples have higher catalytic activity than impregnated ones.     

H_2TPP与AgNO_3在乙醇中的光反应

用紫外可见吸收光谱研究了 5,10 ,15,2 0 -四苯基卟啉 (H2 TPP)的乙醇溶液与AgNO3的乙醇溶液混合后 ,在光照条件下的化学反应。谱图显示H2 TPP发生络合反应 ,生成其二价银络合物Ag(Ⅱ )TPP。银胶能加快该反应的速度。     

Gold and Carbene Relay Catalytic Enantioselective Cycloisomerization/Cyclization Reactions of Ynamides and Enals

The combined use of gold as transition metal catalyst and N‐heterocyclic carbene (NHC) as organic catalyst in the same solution for relay catalytic reactions was disclosed. The ynamide substrate was activated by gold catalyst to form unsaturated ketimine intermediate that subsequently reacted with the enals (via azolium enolate intermediate generated with NHC) effectively to form bicyclic lactam products with excellent diastereo‐ and enantio‐selectivities. The gold and NHC coordination and dissociation can be dynamic and tunable events, and thus allow the co‐existence of both active metal and carbene organic catalysts in appreciable concentrations, for the dual catalytic reaction to proceed.     

电化学部分氟化芳基研究进展

含氟芳香化合物具有生物活性好、稳定性高、易被生物体代谢等优点,在医药和农药领域有着广泛的用途.目前芳基部分氟化的方法主要分为依赖于氟化试剂的亲电氟化方法以及反应条件苛刻甚至需要过渡金属催化的亲核氟化方法,这些方法操作繁琐并且污染环境.电化学氟化将"电能"作为一种"强氧化剂"来实现氟化反应,是一种直接、绿色且温和的氟化手...     

M/C3N4/AC (M=Au,Pt,Ru)催化乙炔与二氯乙烷耦合反应:双功能催化剂性能如何?

聚氯乙烯是世界上产量最大的通用塑料,在日常生活的诸多领域具有广泛应用.按照原料来源划分,聚氯乙烯的工业生产方法主要有基于煤炭的电石法和基于石油的"平衡法".我国有丰富的煤炭资源,因此,电石乙炔法是合成聚氯乙烯的主要途径.该方法采用乙炔与氯化氢在活性炭担载氯化汞催化剂上进行氢氯化反应得到聚氯乙烯的单体氯乙烯.然而,由于汞...     

Comparison of hydrothermal,hydrotropic and organosolv pretreatment for improving the enzymatic digestibility of bamboo

Pretreatment is the crucial step to disrupt the recalcitrant structure of lignocellulosic biomass for improving the enzymatic hydrolysis efficiency. Typically, hydrothermal, organosolv and hydrotropic pretreatments are environmentally benign and effective methods. In this work, effects of hydrothermal, organosolv and hydrotropic pretreatments on improving enzymatic hydrolysis of bamboo were comprehensively compared. Hydrotropic pretreatment was more effective in removal lignin and xylose from bamboo fiber cell wall. However, the surface coverage by lignin and extractives were dramatically displaced during organosolv pretreatment as investigation by X-ray photoelectron spectroscopy. After pretreatments, the crystallinity of cellulose in pretreated substrates has a significant reduction, and pores were exposed on fiber surface. The residual content of acetyl and phenolic groups in hydrotropic pretreated substrates is lower than organosolv pretreated substrates. In order to deeply assess the delignification of pretreatments, the isolated lignins obtaining from pretreatments process were characterized by Fourier transform infrared spectroscopy also. It was revealed that hydrotropic lignin contained more phenolic hydroxyl group and syringyl units than organosolv lignin. Compared to hydrothermal and organosolv pretreatment, cellulase adsorption capacity of pretreated substrates was notably improved by hydrotropic pretreatment, which indicating the better enzyme accessibility of cellulose. Eventually, the maximum glucose yield was obtained from hydrotropic pretreated substrates.     

氨基酸分析方法的研究进展

对目前应用于氨基酸分析的主要方法作了较详细评述。这些方法包括柱后衍生高效阳离子交换色谱法、柱前衍生反相高效液相色谱法、高效阴离子交换色谱-积分脉冲安培检测法等。引用文献73篇。     

Multi-walled carbon nanotubes as a solid-phase extraction adsorbent for the determination of chlorophenols in environmental water samples

Multi-walled carbon nanotubes (MWCNs) are used as adsorbent for solid-phase extraction (SPE) of several chlorophenols (CPs). CPs were adsorbed on MWCNs cartridge, then desorbed with pH 10.0 methanol, finally determined by HPLC. Under the optimized conditions, detection limits of 0.08-0.8 ng mL(-1) were obtained. The method had been applied to analyze the five CPs in tap water and river water.     

Lanthanide (III) addition of [Mo2O3S(HNTA)2] (Ln=Eu, Dy)

The reactions of LnCl₃·6H₂O (Ln=Eu or Dy) and Na₂[Mo₂O₃S(HNTA)₂]·6H₂O afford Na[Mo₂O₃S(HNTA)₂]₂·Eu(H₂O)₉·3H₂O (1) (NTA=nitrilotriacetate) and Na{(H₂O)₆Dy[Mo₂O₃S(HNTA)₂]₂}·7.5H₂O (2), respectively. The [Mo₂O₃S(HNTA)₂]²⁻ cluster units of 1 are interconnected by Na⁺ into a 3-D open framework with rutile topology templated by . The coordination of [Mo₂O₃S(HNTA)₂]²⁻ to the slightly smaller Dy³⁺ ion of greater ionic potential as a consequence of lanthanide contraction has been observed to form the pentanuclear heterometallic {Dy(H₂O)₆[Mo₂O₃S(HNTA)₂]₂}⁻, which is linked by Na⁺ and hydrogen bonds between the protonated carboxylate groups into a 3-D supramolecular framework. The weak antiferromagnetic interactions between the Dy³⁺ ions of 2 have been observed.     

1,3-丁二烯选择性加氢催化剂的设计策略以及构效关系

催化裂化是石油化工的核心单元之一.从催化裂化尾气中分离出来的碳四馏分富含许多的不饱和烯烃,如1-丁烯、顺、反式-2-丁烯以及少量的1,3-丁二烯,这些不饱和烯烃可以通过后续聚合反应,生成合成橡胶和工程塑料的重要原料,具有重要的应用价值.上述工艺过程对原料中1,3-丁二烯的含量(<100~200 ppm)有严苛的要求.采用选择性加氢技术对碳四馏分中的1,3-丁二烯进行选择性加氢,将其转化为更高附加值的单烯烃是一个理想的解决方案.然而,1,3-丁二烯加氢反应得到的单烯烃可能发生深度加氢得到副产物丁烷.因此,开发高效选择性加氢催化剂对碳四资源的利用具有重要的现实意义.另一方面,1,3-丁二烯加氢反应可以作为模型反应,用来考察选择性加氢催化剂的性能.基于此,该反应无论在工业界还是学术界均受到广泛关注.尽管如此,有关1,3-丁二烯加氢催化剂研究进展方面的综述极少.仅有关于1,3-丁二烯加氢作为模型反应的综述报道.本文对过去半个世纪以来1,3-丁二烯加氢反应中不同催化剂的发展历程进行系统综述,特别是包括Pd,Pt和Au等的单一贵金属催化剂.重点介绍以下内容:(1)固体催化剂构效关系,包括活性金属尺寸效应、晶面和形貌效应以及载体效应(晶相、孔道和酸碱性);(2)高性能催化剂的设计新策略,如单原子催化剂、核壳结构催化剂、金属-离子液复合催化体系以及载体的形貌调控;(3)催化剂的反应机理和失活机理.提出了1,3-丁二烯选择性加氢高性能催化剂开发面临的挑战,并对潜在的发展方向进行了展望.本文认为随着纳米技术和金属纳米材料合成方法的快速发展,对贵金属活性组分进行原子层面上的调控(包括形貌、尺寸以及单原子配位环境等)已成为可能.这将有助于研制出一类新型高性能选择性加氢催化材料,从而实现高转化率条件下高附加值单烯烃的定向转化.此外,载体的酸碱性和孔道结构的调控有助于进一步调节催化剂的抗积炭性能,也是未来发展的一个重要方向.