Photolysis of NSAIDs. Part 3: Structural elucidation of photoproducts of tolmetin in methanol

A sample of 10 mM tolmetin in methanol was photo-irradiated with a Hanovia 200 W high-pressure quartz Hg lamp for four days. In total, eight photoproducts were observed from the HPLC chromatogram. Three major photoproducts were separated, and their structures were elucidated by spectroscopic methods. The structures of all photoproducts were further determined by LC-ESI-MS. A reaction scheme of tolmetin was proposed.     

Synthesis,photophysical and electrochemical studies of di-2-pyridyl ketone complexes of rhodium(III)

Complexes of rhodium(III) with di-2-pyridyl ketone (dpk), Rh(dpk)(MeCN)Cl₃ (1) and cis-[Rh(dpk)₂Cl₂]⁺ (2), have been successfully prepared and characterized. At low temperature (77 K), complex (2) in EtOH/MeOH (4:1, v/v) shows a broad, symmetric and structureless red emission with a microsecond lifetime and, hence, is assigned as the dd* phosphorescence. Electrochemical data, including cyclic voltammetry, normal pulse voltammetry, triple pulse voltammetry and controlled potential electrolysis, have been obtained for the two dpk complexes of rhodium(III) in MeCN. On the basis of analysis of the electrochemical (1,2) and luminescence data (2), electron transfer mechanisms are proposed. For complex (1), two reduction processes occur at the metal-localized orbitals with elimination of chlorides during the first reduction step. This is followed by a one-electron reduction at the metal. For complex (2), three electrons are transferred to the metal in two successive reduction steps accompanied by elimination of two chlorides. After these two reduction steps another one-electron reduction occurs at the dpk ligand.     

Temporal Response of SERS to the Potential for 4-Cyanopyridine Adsorbed on Ag Electrode

Time-resolved surface-enhanced Raman scattering (SERS) was applied to study the response of Raman bands from 4-cyanopyridine (PyCN) adsorbed on a Ag electrode to variation of the potential; the temporal resolution was 0.1 s. The response of the SERS signals of PyCN was instantaneous to the oxidation potential of Ag electrode. However, delay of the SERS signals was observed while AgCl was reducing. The decay and growth of the SERS bands look place within 1 s in the cases of desorption and adsorption of PyCN on the electrode. It took much longer for PyCN to alter from one adsorption geometry to another on the electrode.     

Precise and accurate determination of the stoichiometry of CuInS2 semiconductor material by electrochemical methods

Summary CuInS₂ is one of the important I–III–VI₂ ternary compounds which has in recent years received increasing interest in semiconductor science. In this study an electrochemical method has been developed based on a limited amount of available sample (0.5–10mg) for the precise and accurate determination of CuInS₂ composition. After decomposition of the sample in concentrated HNO₃ under pressure, copper and indium were sequentially determined by constant potential coulometry, and sulfur (as sulfate) by amperometric titration. Various experimental parameters which ensure high precision and accuracy of the results were carefully evaluated and calibrated. The overall errors for the determination of copper, indium and sulfur in a 10 mg sample were found to be +0.10%, –0.12% and +0.16%, respectively, which fullfills the requirement for accurate stoichiometric assessment.

---

Reproduzierbare und genaue Bestimmung der Stöchiometrie von CuInS₂-Halbleitermaterial mit Hilfe elektrochemischer Verfahren

---

Presented at the 10th International Symposium on Microchemical Techniques, August 25–29, 1986, Antwerp, Belgium     

Briarenolide E: the first 2-ketobriarane diterpenoid from an octocoral Briareum sp. (Briareidae)

A novel 2-ketobriarane diterpenoid, briarenolide E (1), was isolated from an octocoral Briareum sp. The structure of briarane 1 was elucidated by interpretations of spectral data. Compound 1 displayed modestly inhibitory effects on the generation of superoxide anions and the release of elastase by human neutrophils.     

On the development of a triple‐preserving Maxwell's equations solver in non‐staggered grids

We present in this paper a finite difference solver for Maxwell's equations in non‐staggered grids. The scheme formulated in time domain theoretically preserves the properties of zero‐divergence, symplecticity, and dispersion relation. The mathematically inherent Hamiltonian can be also retained all the time. Moreover, both spatial and temporal terms are approximated to yield the equal fourth‐order spatial and temporal accuracies. Through the computational exercises, modified equation analysis and Fourier analysis, it can be clearly demonstrated that the proposed triple‐preserving solver is computationally accurate and efficient for use to predict the Maxwell's solutions. Copyright © 2009 John Wiley & Sons, Ltd.     

Percolation phenomenon of calcium bis(2-ethylhexyl) sulfosuccinate water-in-oil microemulsions by conductivity and dielectric spectroscopy measurements

The sodium counterion (Na+) of the sodium bis(2-ethylhexyl) sulfosuccinate (AOT) surfactant was exchanged with calcium Ca2+ to investigate the counterion charge effect on the structure of water in normal decane microemulsions. Ohmic conductivity and dielectric permittivity measurements were performed on samples at constant water to surfactant mole ratio [water]/[Ca(AOT)(2)]=26.6. Increasing the volume fraction of the dispersed phase phi, a percolation phenomenon was observed at the constant temperature of 25 degrees C. The percolation threshold was found at phi approximately 15% by Ohmic conductivity and static dielectric permittivity studied as a function of phi, and by the frequency dependence of the complex permittivity. Critical exponents typical of the static percolation mechanism (formation of bicontinuous microemulsions) were found below and above threshold. The comparison of these results obtained for the two different counterions, Ca2+ and Na+, in AOT surfactant water in normal decane microemulsions allows detection of an important difference. The percolation below threshold is dynamic for the sodium-based microemulsions, accounting for the formation of clusters of droplets, whereas calcium-based microemulsions show a static percolation. For this system, the coalescence of droplets begins to occur below threshold at phi approximately 12%.     

Determination of 12 pueraria components by high-performance liquid chromatography-mass spectrometry

Puerariae radix, a commonly used Chinese herb drug derived from the dried root of legume plant, contains a series of isoflavones as its chief pharmacologically active constituents. Using 12 pueraria components as markers, an LC-UV-MS method requiring less than 60 min, was developed for estimating the quality of pueraria samples within 60 min. Extracts were analyzed using a Cosmosil 5C18-MS column, by gradient elution with an aqueous solution of acetic acid and methanol-ACN at a flow-rate of 1.0 mL/min. Peaks were detected at 254 nm and each peak was identified by LC/MS. The reproducibilities (RSD) of this proposed method, on the basis of peak-area ratios from six replicate injections, were 0.93-1.42% (intraday) and 1.05-1.63% (interday) at a detection limit of 0.12-0.78 microg/mL. Most of the markers used in this study can be classified, respectively, into three major categories, namely, isoflavones, O-glycosidic isoflavones, and C-glycosidic isoflavones. The structures of the compounds were determined from LC-MS fragmentation data and data from the literature.     

Synthesis of Imidazo[2,1‐a]isoquinolines from α‐Tosyloxyketones and 1‐Aminoisoquinoline in Ionic Liquid Solvent

The room temperature ionic liquid n‐butylpyridinium tetrafluoroborate (BPyBF₄) is used as a ‘green’ recyclable alternative to classical molecular solvents for the cyclocondensation of α‐tosyloxyketones with 1‐aminoisoquinoline to prepare imidazo[2,1‐a]isoquinolines in good yields.     

A computational study of cycloaddition reactions of d8 metal tetroxide (iron, ruthenium, osmium) complexes with C60

The potential energy surfaces of the cycloaddition reactions MO(4)(NC(5)H(5))(2) + C(60)→ MO(4)(NC(5)H(5))(2)(C(60)) (M = Fe, Ru, and Os) have been studied at the B3LYP/LANL2DZ level of theory. It has been found that there should be two competing pathways in these reactions, which can be classified as a [6,5]-attack (path A) and a [6,6]-attack (path B). Our theoretical calculations indicate that, given the same reaction conditions, the cycloaddition reaction of C(60)via [6,6]-attack is more favorable than that via [6,5]-attack both kinetically and thermodynamically. This is in good agreement with the available experimental observations. A qualitative model, which is based on the theory of Pross and Shaik, has been used to develop an explanation for the barrier heights. As a result, our theoretical findings suggest that the singlet-triplet splitting ΔE(st) (= E(triplet)- E(singlet)) of the d(8) MO(4)(NC(5)H(5))(2) and C(60) species can be a guide to predict their reactivity towards cycloaddition. Our model results demonstrate that the reactivity of d(8) metal tetroxide cycloaddition to C(60) decreases in the order FeO(4)(NC(5)H(5))(2) > RuO(4)(NC(5)H(5))(2) > OsO(4)(NC(5)H(5))(2). In consequence, we show that both electronic and geometric effects play a decisive role in determining the energy barriers as well as the reaction enthalpy.