An efficient preparation of vinamidinium hexafluorophosphate salts

Substituted acetic acids or acetyl chlorides react with phosphorus oxychloride in DMF to yield the vinamidinium salts 3a-j in moderate to excellent recrystallized yields (28-90%). The cations are conveniently isolated as their hexafluorophosphate salts, which are easily handled nonhygroscopic solids. The nitro compound 3l is prepared in 91% yield by nitration of the parent vinamidinium 3k. The X-ray crystal structure is reported for the 2-phenyl isomer 3e and displays minimal overlap of the two pi-systems.     

Studies on the interactions between anionic surfactants and polyvinylpyrrolidone: Surface tension measurement, 13C NMR and ESR

 The interaction between anionic surfactants and polyvinylpyrrolidone (PVP) are investigated using ¹³C NMR, ESR spectroscopy and surface tension measurements at the air/water interface. The behavior of single-chained surfactant, sodium dodecyl sulphonate (AS), is compared with that of the double-chained surfactant, sodium bis(2-ethylhexyl) phosphate (NaDEHP). The results showed that a surfactant–polymer complex of “necklace and head structure” is formed in AS aqueous solutions in the presence of PVP due to the hydrophobic interaction between PVP and AS. The AS micelles nucleate on the polymer hydrophobic sites, and the mobility of the AS head groups is not affected. But, for NaDEHP surfactant, it was found that PVP is little effective in influencing the monomer–micelle equilibrium and no surfactant– polymer complex formed in the NaDEHP aqueous solution. Received: 8 May 1996 Accepted: 14 August 1997     

乙醇羰化反应负载型催化剂的研究

本文由七种负载型催化剂中选出两种比较好的乙醇羰化催化剂,研究了影响反应转化率和选择性的因素,考察了活性组份的价态和载体的酸性。此外,还对催化剂进行了能量色散X射线分析。从其结果看,谱图上只有活性中心铑的谱峰而没有氯的谱峰,说明铑是以离子形式进入载体,而不是以化合物形式被吸附于载体上。     

Surface plasmon resonance spectroscopy and quartz crystal microbalance study of streptavidin film structure effects on biotinylated DNA assembly and target DNA hybridization

Surface plasmon resonance (SPR) spectroscopy is employed for the study of biotinylated DNA assembly on streptavidin modified gold surfaces for target DNA hybridization. Two immobilization strategies are involved for constructing streptavidin films, namely, (1) physical adsorption on biotin-containing thiol treated surfaces through biotin-streptavidin links and (2) covalent attachment to 11-mercaptoundecanoic acid (MUA) treated surfaces through amine coupling. To understand the structural properties of the streptavidin films, a quartz crystal microbalance with energy dissipation monitoring (QCM-D) is used to monitor the streptavidin immobilization procedures. The simultaneously measured frequency (Deltaf) and dissipation factor (DeltaD) changes, together with the SPR angle shifts (Deltatheta), suggest that the streptavidin film assembled on the biotin-containing surface is highly rigid with a well-ordered structure while the streptavidin film formed through amine coupling is highly dissipative and less structured. The subsequent biotinylated DNA (biotin-DNA) assembly and target hybridization results show that the streptavidin film structure has distinct effects on the biotin-DNA binding amount. On the streptavidin matrix, not only the probe DNA density but also the strand orientation mediated by the streptavidin films has distinct effects on hybridization efficiency. Particularly, the molecularly ordered streptavidin films formed on the biotin-containing surfaces ensure a well-ordered DNA assembly, which in turn allows for a higher efficiency in target DNA capture and for a higher sensitivity in the hybridization analysis when compared to the biotin-DNA assembled on the less structured streptavidin films formed through amine coupling.     

Synthesis of triphenylamine-cored dendritic two-photon absorbing chromophores

[structure: see text]. A new series of dendritic two-photon absorbing chromophores containing triphenylamine moiety as a core or branching points have been synthesized through a convergent synthetic strategy. One-photon and two-photon optical properties of these molecules were characterized. In the nanosecond time domain, these molecules exhibited large two-photon absorption (TPA) cross sections up to 7.56-12.2 x 10(-44) s cm(4) at 800 nm, indicating that these molecular structures were viable candidates for various two-photon related applications.     

Migration behavior and enantioseparation of hydrobenzoin and structurally related compounds in capillary zone electrophoresis with a dual cyclodextrin system consisting of heptakis-(2,3-dihydroxy-6-O-sulfo)-beta-cyclodextrin and beta-cyclodextrin

Migration behavior and enantioseparation of racemic hydrobenzoin and structurally related compounds, including benzoin and benzoin methyl ether, in CZE with a dual CD system consisting of heptakis-(2,3-dihydroxy-6-O-sulfo)-beta-CD (SI-S-beta-CD) and beta-CD as chiral selectors in the presence and absence of borate complexation at pH 9.0 were investigated. The results indicate that enantioseparation of hydrobenzoin is mainly governed by CD complexation of hydrobenzoin-borate complexes with SI-S-beta-CD when SI-S-beta-CD concentration is relatively high. Whereas CD complexation of hydrobenzoin-borate complexes with beta-CD plays a significant role in enantioseparation when SI-S-beta-CD concentration is comparatively low. The (S,S)-enantiomer of the hydrobenzoin-borate complex was found to interact more strongly than the corresponding (R,R)-enantiomer with both SI-S-beta-CD and beta-CD. These two types of CD show the same chiral recognition pattern, but they exhibit opposite effects on the mobility of the enantiomers of hydrobenzoin-borate complexes. Enantiomer migration reversal of hydrobenzoin occurred in the presence of borate complexation when varying the concentration of beta-CD, while keeping SI-S-beta-CD at a relatively low concentration. Binding constants of the enantiomers of benzoin-related compounds to beta-CD and those of hydrobenzoin-borate complexes to SI-beta-CD were evaluated; the mobility contributions of all complex species to the effective mobility of the enantiomers of hydrobenzoin as a function of beta-CD concentration in a borate buffer were analyzed. In addition, comparative studies on the enantioseparation of benzoin-related compounds with SI-S-beta-CD and with randomly sulfate-substituted beta-CD were made.     

The Mutual Conversion of CO2 and CO in Dielectric Barrier Discharge (DBD)

Non-equilibrium plasma, which was engendered by dielectric barrier discharge (DBD) was used to analyze the mutual conversion between CO₂ and CO. The results showed that the conversion ratio of CO increased monotonously with the increasing voltage. But CO₂ was not so. Its conversion ratio reached maximum when the voltage was 3600 V in Ar system. It also showed that the existence of water molecules was more advanageous for the conversion of CO to CO₂ in Air system than in oxygen system, and the conversion ratio could reach 75.8% when the relative humidity was 100%. We also discussed the energy yield and energy efficiency, and the result was that high voltage and high concentration of reactant was disadvantageous for energy utilization.     

Systematic synthesis and characterization of single-crystal lanthanide orthophosphate nanowires

A simple hydrothermal method has been developed for the systematic synthesis of lanthanide orthophosphate crystals with different crystalline phases and morphologies. It has been shown that pure LnPO(4) compounds change structure with decreasing Ln ionic radius: i.e., the orthophosphates from Ho to Lu as well as Y exist only in the tetragonal zircon (xenotime) structure, while the orthophosphates from La to Dy exist in the hexagonal structure under hydrothermal treatment. The obtained hexagonal structured lanthanide orthophosphate LnPO(4) (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy) products have a wirelike morphology. In contrast, tetragonal LnPO(4) (Ln = Ho, Er, Tm, Yb, Lu, Y) samples prepared under the same experimental conditions consist of nanoparticles. The obtained hexagonal LnPO(4) (Ln = La --> Tb) can convert to the monoclinic monazite structured products, and their morphologies remained the same after calcination at 900 degrees C in air (Hexagonal DyPO(4) is an exceptional case, it transformed to tetragonal DyPO(4) by calcination), while the tetragonal structure for (Ho--> Lu, Y)PO(4) remains unchanged by calcination. The resulting LnPO(4) (Ln = La --> Dy) products consist almost entirely of nanowires/nanorods with diameters of 5-120 nm and lengths ranging from several hundreds of nanometers to several micrometers. Europium doped LaPO(4) nanowires were also prepared, and their photoluminescent properties were reported. The optical absorption spectrum of CePO(4) nanowires was measured and showed some differences from that of bulk CePO(4) materials. The possible growth mechanism of lanthanide phosphate nanowires was explored in detail. X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, electron diffraction, infrared absorption spectra, X-ray photoelectron spectroscopy, optical absorption spectra, and photoluminescence spectra have been employed to characterize these materials.     

Stereoselective synthesis of (+)-boronolide and its 8-epimer

Starting from readily available carbohydrates the synthesis of 8-epi-(+)-boronolide 19 and (+)-boronolide was achieved with diastereoselective propargylation of alpha-oxygenated aldehyde as a key step.     

Quantification of analytes in overlapping peaks from capillary electrophoresis using multivariate curve resolution-alternating least squares methods

Application of multivariate curve resolution with alternating least squares (ALS) methods to second-order data from capillary electrophoresis diode array detector (CE-DAD) is shown. Second-order data are easily obtained by setting individual data matrix of CE run one in top of the other. Initial qualitative solutions obtained by evolving factor analysis can be further optimized by simultaneous analysis of multiple electrophoresis run data with ALS regression. Quantification is achieved by the comparison of the analyte peak areas with that of pure standards. During the ALS regression procedure, the following constraints were applied: (i) both concentrations and unit pure spectra of the resolved components must be positive; (ii) elution profiles have an unimodal shape; (iii) correspondence exists between common species in the different data matrices; (iv) the pure spectrum of each species is the same in all runs where it is present. The above methods were applied for the determination of dinitrotoluene (DNT) isomeric compounds in overlapping peaks from CE.