Reaction dynamics of Cl+CH3SH: rotational and vibrational distributions of HCl probed with time-resolved Fourier-transform spectroscopy

Rotationally resolved infrared emission spectra of HCl(v=1-3) in the reaction of Cl+CH3SH, initiated with radiation from a laser at 308 nm, are detected with a step-scan Fourier-transform spectrometer. Observed rotational temperature of HCl(v=1-3) decreases with duration of reaction due to collisional quenching; a short extrapolation to time zero based on data in the range 0.25-4.25 micros yields a nascent rotational temperature of 1150+/-80 K. The rotational energy averaged for HCl(v=1-3) is 8.2+/-0.9 kJ mol(-1), yielding a fraction of available energy going into rotation of HCl, fr=0.10+/-0.01, nearly identical to that of the reaction Cl+H(2)S. Observed temporal profiles of the vibrational population of HCl(v=1-3) are fitted with a kinetic model of formation and quenching of HCl(v=1-3) to yield a branching ratio (68+/-5):(25+/-4):(7+/-1) for formation of HCl(v=1):(v=2):(v=3) from the title reaction and its thermal rate coefficient k(2a)=(2.9+/-0.7)x10(-10) cm(3) molecule(-1) s(-1). Considering possible estimates of the vibrational population of HCl(v=0) based on various surprisal analyses, we report an average vibrational energy 36+/-6 kJ mol(-1) for HCl. The fraction of available energy going into vibration of HCl is f(v)=0.45+/-0.08, significantly greater than a value fv=0.33+/-0.06 determined previously for Cl+H2S. Reaction dynamics of Cl+H(2)S and Cl+CH3SH are compared; the adduct CH3S(Cl)H is likely more transitory than the adduct H(2)SCl.     

Reversible formation of DNA G-quadruplex hairpin dimers from stilbenediether conjugates

Rapid and reversible G-quadruplex hairpin dimer formation is observed for bis(oligonucleotide) conjugates possessing stilbenediether (Sd) linkers connecting two short poly(G) sequences.     

Studies on the reactions of silyl enol ether with perfluoroorganic compounds1 III. Synthesis of perfluoroalkylated α, β-unsaturated aldehydes and their derivatives

Per- and poly-fluoroalkylated α, β-unsaturated alkenals were synthesized by the reaction of silyl enol ether of alkanals with per- and poly-fluoroalkyl iodide initiated by Na₂S₂O₄ conveniently in high yield. Their corresponding alkenol and 2,4-dinitrophenylhydrazone were also synthesized.     

Application of Functionalized Ag Nanoparticles for the Determination of Proteins at Nanogram Levels Using the Resonance Light Scattering Method

A novel method for the determination of proteins in aqueous solutions has been developed based on the enhancement of resonance light scattering (RLS) of Ag nanoparticles in the presence of proteins. Factors including acidity of the media, concentration of Ag hydrosol, reaction time, temperature, and interference of non-protein substances were investigated. Under the optimal conditions, with the enhanced RLS signals at 452nm, the linear ranges of calibration curves were 0–0.8µgmL^–1 for bovine serum albumin (BSA), 0–1.2µgmL^–1 for human serum albumin (HSA), and 0–2.5µgmL^–1 for human -IgG (-IgG), respectively. The detection limits were 1.3ngmL^–1 for BSA, 10ngmL^–1 for HAS, and 5.7ngmL^–1 for -IgG.This method has been applied to the analysis of synthetic samples and real human serum samples, and the results were in good agreement with those reported by the hospital, indicating that the method presented here is not only sensitive and simple, but also reliable and suitable for practical applications.     

The determination of trace amounts of tin by flow-injection hydride generation atomic-absorption spectrometry with on-line ion-exchange separation and preconcentration

A hydride generation atomic-absorption spectrometric (AAS) method with flow-injection (FI), aimed at developing a practical routine assay for the determination of tin in food digests, is described. In order to modify the sample matrix and to achieve optimized and reproducible conditions for the hydride generation reaction, the analyte is initially converted into its chlorostannate-complex thereby allowing it to be separated and preconcentrated on-line on an incorporated micro-column packed with a strongly basic anion exchanger and subsequently to be eluted by diluted nitric acid under strictly controlled conditions. Optimum acidic conditions for the FI hydride generation AAS system was found to be 0.01-0.05M nitric acid. At a consumption of 2.7-ml sample volume, aspirated by time-based injection, the procedure resulted in an enrichment factor of 3.5 and yielded a detection limit of 0.08 microg/l. (3sigma) at a sampling frequency of 72/hr. The precision was 2.5% rsd at the 10 microg/l. level. Potential interferents, such as Ni(II), Co(II), Zn(II) and Fe(III) could, at a Sn level of 10 microg/l., be tolerated at an excess of 1000 times without impairing the assay, while a 100-1000-fold excess of Cu(II) decreased the signal by 10-15%. Recoveries in the range 94-102% were obtained for canned food sample digests spiked with 10 microg/l. Sn.     

The formation of a compact polymer film on a copper electrode from benzimidazole solution

The effects of the pretreatment of copper in benzimidazole solutions on the anodic reactions have been observed. The structures of the chemisorbed benzimidazole on copper were studied by using the infrared reflection-absorption technique and X-ray photoelectron spectroscopy. It was found that a compact film of benzimidazolato copper(I) was formed on the copper surface when copper was immersed in a stirred benzimidazole solution and cyclic voltammetry applied. This compact polymer film inhibited anodic oxidation effectively.     

Application of the slotted quartz tube in flow-injection flame atomic-absorption spectrometry

The slotted quartz has been applied to flow-injection flame atomic-absorption spectrometry (FI-FAAS) showing several important advantages. The tube life was improved by a factor of 5-6 compared to conventional continuous aspiration. Flow impact systems were found not to be necessary in the applications so that larger enhancement factors may be achieved without sacrifice in precision. For 1.0 mg/l. copper, 1.0 mg/l. lead, 0.1 mg/l. cadmium and 1.0 mg/l. gold sensitivity enhancement factors of 3.1, 5.5, 5.3 and 4.0 were obtained with precisions of 1.3%, 1.1%, 1.6% and 1.7% RSD (n = 11) respectively. Application of the slotted quartz tube FI-FAAS method to the determination of heavy metals in urine has shown improved tolerance to interfering matrices. Recoveries obtained by spiking undiluted urine samples with 0.1 mg/l. copper and lead, and 0.01 mg/l. cadmium were in the range 100-102%.     

Studies of the g factors and zero-field splitting for the trigonal Ti(2+)(Ga)-S(p) defect center in GaP crystal

The EPR g factors g(parallel), g(perpendicular) and zero-field splitting D suggested to be caused by a donor-acceptor nearest-neighbour pair defect [Ti(Ga)(2+)-Sp] in GaP:Ti(2+) co-doped with sulphur are calculated from the high-order perturbation formulas based on a two spin-orbit coupling parameter model for the EPR parameters of 3d(2) ion in trigonal symmetry. The calculated results are close to the observed values. The suggestion of [Ti(Ga)(2+)-Sp] pair defect in GaP:Ti co-doped with sulphur is also confirmed from this calculation.     

Synthesis of [1,2-3H2]-polystyrene

The synthesis of [1,2-³H₂]-polystyrene consisted of a two step reaction. First catalytic tritium gas addition to phenylacetylene was used to prepare [1,2-³H₂]-styrene and then it was polymerized to [1,2-³H₂]-polystyrene in the present of an initiator.     

Theoretical investigation of novel silsesquioxane-supported Phillips-type catalyst by density functional theory (DFT) method

In spite of great commercial importance of the Phillips CrO_x/SiO₂ catalyst and long term research efforts, the precise physicochemical nature of active sites and polymerization mechanisms still remains unclear. The difficulties in a clear mechanistic understanding of this catalyst mainly come from the complexity of the surface chemistry of the amorphous silica gel support. In this work, novel silsesquioxane-supported Phillips Cr catalysts are utilized as realistic models of the industrial catalyst for theoretical investigation using the density functional theory (DFT) method in order to elucidate the effects of surface chemistry of silica gel in terms of supporting of chromium compounds and fluorination of the silica surface on the catalytic properties of the Phillips catalyst. Both qualitative and quantitative aspects with respect to various electronic properties and thermodynamic characteristics of the model catalysts were achieved. The future prospects of a state-of-the-art catalyst design and mechanistic approaches for the heterogeneous SiO₂-supported Phillips catalyst has been demonstrated. The text was submitted by the authors in English.