痕量Au Bi和Cd的萃取浮选及原子吸收光谱法测定

浮选法分离痕量金属离子,由于灵敏度高、选择性强已得到广泛应用。本文利用浮选法使Au~(3 )、Bi~(3 )和Cd~(2 )同KBr反应生成的络合阴离子与碱性染料罗丹明B(RB)生成既疏水又疏有机溶剂的三元离子缔合物,后者经甲苯浮选分出,用二甲基甲酰胺(DMF)溶解后,可用原子吸收法测定Au、Bi和Cd的含量。本方法用于海水,锌片和矿样中上述三种元素的微量测定,可提高检测灵敏度,而且K、Na、Ca、Mg等共存离子不生干扰。具体实验方法如下:     

气态丙烯酸光致脱羧反应AM1法研究

半经验的自洽场分子轨道法(AM1)被用来研究激发单态(~1ππ~*)和三态(~3ππ~*)丙烯酸的脱羧反应. 计算结果支持Robert等人提出的光解机理. 与实验结合. 进一步推测, 丙烯酸光致脱羧反应的第一步, 是沿单态途径进行, 第二步沿三态途径进行. 单态和三态反应途径中的反应物、过渡态、中间体和产物都用能量梯度技术进行了优化. 对于过渡态和中间体, 还作了振动分析, 确证它们分别是一级鞍点和能量极小值点.     

Spin-orbit ab initio investigation of the ultraviolet photolysis of diiodomethane.

The UV photodissociation (<5 eV) of diiodomethane (CH(2)I(2)) is investigated by spin-orbit ab initio calculations. The experimentally observed photodissociation channels in the gas and condensed phases are clearly assigned by multi-state second-order multiconfigurational perturbation theory in conjunction with spin-orbit interaction through complete active space-state interaction potential energy curves. The calculated results indicate that the fast dissociations of the first two singlet states of CH(2)I(2) and CH(2)I--I lead to geminate-radical products, CH(2)I (.)+I((2)P(3/2)) or CH(2)I (.)+ I*((2)P(1/2)). The recombination process from CH(2)I--I to CH(2)I(2) is explained by an isomerization process and a secondary photodissociation reaction of CH(2)I--I. Finally, the study reveals that spin-orbits effects are significant in the quantitative analysis of the electronic spectrum of the CH(2)I--I species.     

铁系元素冠醚配合物的研究——V.三氯化铁与4′-溴苯并-15-冠-5固态配合物的合成和性质

本文报导了三氯化铁(水合物)与4′-溴苯并-15-冠-5(L)固态配合物的合成,对合成的新配合物,进行了元素定量分析及摩尔电导测定,并作了红外光谱、紫外光谱,热重和差热以及X-射线粉末衍射分析的性质表征。从而证明,该配合物中FeCl₃与配体L比为1:1,是溶化剂,含有结晶水的固态配合物。     

Application of thermo-electrochemistry to simultaneous leaching of sphalerite and MnO2

In order to enhance the electrogenerative leaching rate of sphalerite reasonably, the basic principle of generative process was applied to the simultaneous leaching of sphalerite in the presence of MnO₂. It was confirmed by experimental results that both mental ions and electric energy could be obtained in the simultaneous electrogenerative leaching process. The leaching cell had the open circuit potential about 1.0 V, about 2000 C of electric quantity was obtained, the optimal leaching ratio of Zn²⁺ and Mn²⁺ was 48.5, 39.6% respectively, after electrogenerative leaching for 11 h.     

Capillary Electrophoresis of the Active Ingredients of Dioscorea bulbifera L. and its Medicinal Preparations

A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of epicatechin, isovanillic acid, vanillic acid and myricetin in Dioscorea bulbifera L. and its medicinal preparations. The effects of working electrode potential, pH and concentration of running buffer, separation voltage and injection time were investigated. Under optimum conditions, the analytes could be separated in a 40 mmol L^?1 borate buffer (pH 8.7) within 15 min. A 300 μm diameter carbon disk electrode has a good response at + 0.95 V (vs. SCE) for all analytes. The response was linear over three orders of magnitude with detection limits (S/N = 3) ranging from 3.0 × 10^?8 g mL^?1 to 1.0 × 10^?7 g mL^?1. The method has been successfully applied to the analysis of real samples.     

Effect of diluting agent on sensitivity in capillary electrophoresis with amperometric detection

Besides the running buffer, pH of buffer, separation voltage and sampling time, the diluting agent was studied in this paper as one of the important factors influencing the sensitivity in capillary electrophoresis (CE) with amperometric detection (AD) when electrokinectic sampling was used. Clonidine hydrochloride, hydrochlorothiazide and rutin, which are positively charged, neutral and negatively charged, respectively, in aqueous solutions, could be perfectly separated by CE with 25 mmol x L(-1) Na(2)B(4)O(7) - 50 mmol x L(-1) NaH(2)PO(4) as running buffer and detected by measuring their current responses with AD. Before CE running, some kinds of diluents including water, methanol, formamide, running buffer, hydrochloric acid and sodium hydroxide were, respectively, applied to dilute the stock solutions of above three analytes and their effects on the sensitivity of CE-AD were investigated. The results showed that for electrokinetic injection, the current responses of these three analytes were greatly affected in different ways when different diluting agents were used. This method was applied to simultaneously determine the active ingredients in one Chinese compound hypotensor named Zhen Ju Jiang Ya Pian, in which the contents of clonidine hydrochloride, hydrochlorothiazide and rutin is very different as 0.03 mg : 5 mg : 20 mg per tablet, and satisfactory results were obtained by adjusting their sensitivity by selecting the suitable diluting agent.     

光学活性含硅氨基酸的合成

光学纯的硅取代氨基酸是一类非天然的手性氨基酸合成子，在药物，植物保护 剂和精细化学品的合成具有极为广阔的应用前景，其合成方法包括化学不对称合成 及化学合成外消旋体－生物学拆分两种，综述了该方面的研究进展。     

Studies on the interactions between anionic surfactants and polyvinylpyrrolidone: Surface tension measurement, 13C NMR and ESR

 The interaction between anionic surfactants and polyvinylpyrrolidone (PVP) are investigated using ¹³C NMR, ESR spectroscopy and surface tension measurements at the air/water interface. The behavior of single-chained surfactant, sodium dodecyl sulphonate (AS), is compared with that of the double-chained surfactant, sodium bis(2-ethylhexyl) phosphate (NaDEHP). The results showed that a surfactant–polymer complex of “necklace and head structure” is formed in AS aqueous solutions in the presence of PVP due to the hydrophobic interaction between PVP and AS. The AS micelles nucleate on the polymer hydrophobic sites, and the mobility of the AS head groups is not affected. But, for NaDEHP surfactant, it was found that PVP is little effective in influencing the monomer–micelle equilibrium and no surfactant– polymer complex formed in the NaDEHP aqueous solution. Received: 8 May 1996 Accepted: 14 August 1997     

Quantification of analytes in overlapping peaks from capillary electrophoresis using multivariate curve resolution-alternating least squares methods

Application of multivariate curve resolution with alternating least squares (ALS) methods to second-order data from capillary electrophoresis diode array detector (CE-DAD) is shown. Second-order data are easily obtained by setting individual data matrix of CE run one in top of the other. Initial qualitative solutions obtained by evolving factor analysis can be further optimized by simultaneous analysis of multiple electrophoresis run data with ALS regression. Quantification is achieved by the comparison of the analyte peak areas with that of pure standards. During the ALS regression procedure, the following constraints were applied: (i) both concentrations and unit pure spectra of the resolved components must be positive; (ii) elution profiles have an unimodal shape; (iii) correspondence exists between common species in the different data matrices; (iv) the pure spectrum of each species is the same in all runs where it is present. The above methods were applied for the determination of dinitrotoluene (DNT) isomeric compounds in overlapping peaks from CE.