火灾烟雾颗粒凝并分形特性研究

火灾烟雾颗粒因布朗运动由初期的主粒子凝并形成大颗粒的凝团结构，其外形呈现出分形特征，根据分形理论对火灾烟雾颗粒凝团结构进行分析研究，采用场发射扫描电镜对多种材料的烟雾颗粒图像进行测试，通过对烟雾凝团图像进行处理，获得了火灾探测中常见的多种材料的分形维数和分形系数，给出了烟雾颗粒的主粒子粒径，并对其影响因素进行了对比分析，为火灾烟雾探测中颗粒凝并分形特性研究提供有益的探索. 关键词： 火灾 烟雾 颗粒 凝并 分形     

快中子照相中的点扩展函数计算

 快中子照相中,基于反冲核原理探测快中子的有机闪烁体平板是普遍采用的快中子辐射转换体。模拟了D-T中子垂直入射BC400闪烁体平板,计算了不同厚度平板闪烁体的点扩展函数,对14.1 MeV快中子照相中闪烁体固有分辨率随厚度的变化进行了研究。计算结果表明,在不考虑二次中子与闪烁体作用及背景噪声等情况时,点扩展函数几乎不依赖于闪烁体厚度。同时,计算还表明在一定的分辨率范围内,由于荧光收集效率的限制,闪烁体厚度增加并不会改善图像对比度。     

“阳”加速器钼丝X-pinch初步实验研究

 在“阳”加速器上进行了直径分别为10, 15, 20 μm, 交叉角为32°,45°,60°的钼（Mo）丝X-pinch实验。“阳”加速器产生的电流峰值约520 kA，上升时间80 ns。实验中通过X射线功率谱仪和纳秒分幅相机等仪器对Mo丝X-pinch辐射特性进行了诊断。实验表明：Mo丝X-pinch过程中会出现多次X射线爆发，箍缩过程中产生的热点辐射出能量超过3 keV的X射线，探测到的最小热点直径小于30 μm。     

掺镱双包层光纤放大器分布泵浦方式下的优化算法

 利用平均反转率迭代算法计算掺镱双包层光纤放大器分布泵浦方式下的稳态速率方程组,并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行优化。评估函数中引入了每段光纤中最高温度的标准方差,以确保每段光纤中的最高工作温度是相同的。通过优化,7段泵浦的最高温度和标准方差分别为126.34 ℃和1.95 ℃ ,8段泵浦条件下的最高温度和标准方差分别为119.76 ℃和2.12 ℃。而未经优化的7段泵浦的最高温度和标准方差分别为147.12 ℃和21.37 ℃,8段泵浦条件下的最高温度和标准方差分别为139.95 ℃和20.83 ℃。计算结果表明：泵浦方式的优化降低了最高温度和标准方差,实现了光纤中温度分布的均匀性,并且通过增加泵浦段数可以进一步降低最高温度和平坦温度分布。     

基于单端半导体光放大器的可调谐超短光脉冲源理论与实验研究

超短光脉冲源是光时分复用(OTDM)系统中的关键器件.提出了一种基于单端半导体光放大器(SOA)的注入型主动锁模光纤激光器产生超短光脉冲的方案，建立了该方案的理论模型.实验实现了高消光比稳定的重复频率10—40GHz皮秒级光脉冲的输出，输出波长在30nm范围内连续可调. 关键词： 超短光脉冲 单端半导体光放大器 主动锁模     

Tb0.3Dy0.7(Fe0.9T0.1)1.95合金的结构、自旋重取向和穆斯堡尔谱

系统研究了室温下Tb_0.3Dy_0.7(Fe_0.9T_0.1)_1.95(过渡金属元素T=Mn，Fe，Co，B，Al，Ga)合金中ⅢA族金属和过渡金属元素T替代Fe对结构、自旋重取向和穆斯堡尔谱的影响.结果发现，不同金属T替代Fe，Tb_0.3Dy_0.7(Fe_0.9T_0.1)_1.95，合金具有相同的MgCu₂型立方Laves相结构；Al，Ga替代使Tb_0.3Dy_0.7(Fe_0.9T_0.1)_1.95合金的易磁化方向在{110}面逐渐偏离了立方晶体的主对称轴，即自旋重取向，B，Mn，Co替代未使易磁化轴发生明显转动；Al，Ga元素替代使超精细场H_hf略有下降，B，Mn替代对超精细场H_hf的影响不大，而Co元素替代使超精细场H_hf有较大增加；所有元素替代使同质异能移IS有所增加；B，Al，Ga和Mn替代使四极劈裂Q_s增加，而Co替代使四极劈裂Q_s下降. 关键词： 立方Laves相 自旋重取向 穆斯堡尔谱     

Simultaneous estimation of the temperature and heat rate distributions within the combustion region by a new inverse radiation analysis

A new inverse radiation analysis is presented for estimating the heat rate and temperature distributions in the combustion region from the information of the temperature and heat flux profiles of wall elements in the system. The Monte Carlo method is employed to solve the radiative heat transfer equation. The inverse radiation problem is posed as a minimization problem of the least squares criterion, which is solved by the conjugate gradient method. The performance of the present technique of inverse analysis is evaluated and the effects of the errors of the absorption coefficient, emissivity and convective heat transfer coefficient on the inverse analysis are investigated. The results show that the present technique is robust and yields accurate estimation even with noisy measurement.     

“J—646”新型光学光敏胶胶合工艺简介

“J—646”光敏胶具有透光率好,收缩率小,粘接强度适中,耐老化,毒性小和成本低廉等特点。本文简要介绍了该胶的胶合工艺。     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.     

Impact of Extracellular Polymeric Substance in the Inactivation of Harmful Algae by Ag2O/g-C3N4 under Visible Light

Photocatalysis has attracted much attention as an emerging algae removal technology, but the inactivation performance is inevitably affected by the extracellular polymeric substance (EPS) produced by algae. In this study, a photocatalyst (Ag₂O/g-C₃N₄) with efficient algae inactivation is adopted to investigate the interactions with EPS, and the impact of EPS on photocatalytic algae removal is studied. The results show that EPS can adhere to the surface of Ag₂O/g-C₃N₄ by electrostatic force. The interaction with EPS decreases the surface zeta potential of the Ag₂O/g-C₃N₄ from 7.71 to −22.3 mV with the increase in EPS concentration, and the maximum ratio of particle size increases from 825 to 1281 nm. In addition, the interaction with EPS inhibits the release of Ag⁺ in Ag₂O/g-C₃N₄ by half, thus, the toxicity of metal ions will be alleviated. Meanwhile, EPS can also be degraded by Ag₂O/g-C₃N₄, indicating that EPS can work as a radical scavenger to protect the algae cells. Without the protection of EPS, 97.8% of algae cells are inactivated after 5 h photocatalysis. Therefore, more attention should be given to the interaction between EPS and photocatalyst to promote the design and application of the photocatalytic.