受激旋转拉曼散射对强紫外激光相位的影响

 利用瞬态受激旋转拉曼散射（SRRS）模型及相位畸变模型，对具有空间相位畸变的强紫外激光束在空气中长程传输的SRRS效应进行了研究。详细讨论了低频和中高频空间相位畸变对SRRS阈值条件、斯托克斯光转换效率、剩余泵浦光和斯托克斯光相位的影响。研究结果表明，泵浦光的初始相位畸变对斯托克斯光相位畸变的影响较剩余泵浦光的更为明显；高频相位畸变对转换效率影响较低频相位畸变更大； SRRS效应阈值随低频相位畸变的增大而减小，随高频相位畸变的增大而增大。     

现场拉曼光谱研究乙腈在金电极上的解离吸附行为

利用共焦显微拉曼系统、结合合适的电极表面粗糙方法研究了非水体系 0 1mol/LLiClO4 /CH3CN溶液中 ,乙腈分子在金表面的吸附和解离行为。结果表明非水体系中乙腈可在金表面发生还原反应 ,产物CN- 离子与电极表面作用形成的表面配合物可在较宽的电位区间吸附于电极表面。溶液中的微量水、激光照射以及电极电位均对该反应有较大的影响。通过拉曼谱图的比较得出乙腈分子解离出的CN- 在金电极表面比在银电极表面有更强的吸附作用。     

Ψ(2S)粒子及粲夸克偶素物理实验研究——2001年度国家自然科学奖获奖项目介绍

文章介绍2001年度国家自然科学奖二等奖获奖成果，在北京正负电子对撞机上采集了Ψ（2S）粒子大数据样本，开展了粲偶素物理的广泛研究：完成了6个粲偶素涉及质量，宽度和衰变化支比等大批重要参数的首次测量或高精度测量；通过对Ψ（2S）和J／Ψ强衰变性质的比较研究，观察到一系列反常现象，挑战现有理论图像。该项研究成果对量子色动力学的检验与发展具有重要意义，为我国粲偶素物理实验研究的继续发展并保持先进水平奠定坚实基础。     

Acoustic vector sensor signal processing

Acoustic vector sensor simultaneously, colocately and directly measures orthogonal components of particle velocity as well as pressure at single point in acoustic field so that is possible to improve performance of traditional underwater acoustic measurement devices or detection systems and extends new ideas for solving practical underwater acoustic engineering problems. Although acoustic vector sensor history of appearing in underwater acoustic area is no long, but with huge and potential military demands, acoustic vector sensor has strong development trend in last decade, it is evolving into a one of important underwater acoustic technology. Under this background, we try to review recent progress in study on acoustic vector sensor signal processing, such as signal detection, DOA estimation, beamforming, and so on.     

Convergence Rate of The Trust Region Method for Nonlinear Equations Under Local Error Bound Condition

In this paper, we present the new trust region method for nonlinear equations with the trust region converging to zero. The new method preserves the global convergence of the traditional trust region methods in which the trust region radius will be larger than a positive constant. We study the convergence rate of the new method under the local error bound condition which is weaker than the nonsingularity. An example given by Y.X. Yuan shows that the convergence rate can not be quadratic. Finally, some numerical results are given. This work is supported by Chinese NSFC grants 10401023 and 10371076, Research Grants for Young Teachers of Shanghai Jiao Tong University, and E-Institute of Computational Sciences of Shanghai Universities. An erratum to this article is available at .     

Ab Initio Study on the Isomerization and Dehydrogenation of Methylnitrene

The ab initio calculations were performed at the RHF/4-31G level with the reaction pathways of the iso-merization and dehydrogenation of methylnitrene by the intrinsic reaction coordinate method. The results show that the transformation from methylnitrene to methylenimine would be very easy. This accountes for the experimental fact that one couldn' t find the methylnitrene, but only obtained the methylenimine in the pyrolysis of methyl azide. The mode-selective study reveals the reaction coordinates (IRC) of isomerization and dehydrogenation of methylnitrene are associated with the molecular deformation mode of 1191 cm-1 and the methyl group unsymmetrical stretch mode, respectively. The coupling between normal coordinates is favourable to select the reaction channel of isomerization.     

退火对电子束热蒸发193nm Al2O3/MgF2反射膜性能的影响

设计并镀制了193nm Al2O3/MgF2反射膜,对它们在空气中分别进行了250-400℃的高温退火,测量了样品的透射率光谱曲线和绝对反射率光谱曲线.发现样品在高反射区的总的光学损耗随退火温度的升高而下降,而后趋于饱和.采用总积分散射的方法对样品在不同退火温度下的散射损耗进行了分析,发现随着退火温度的升高散射损耗有所增加.因此,总的光学损耗的下降是由于吸收损耗而不是散射损耗起主导作用.对Al2O3材料的单层膜进行了同等条件的退火处理,由它们光学性能的变化推导出它们的折射率和消光系数的变化,从而解释了相应的多层膜光学性能变化的原因.反射膜的反射率在优化联系、镀膜工艺与退火工艺的基础上达98%以上.     

Ce3+-冠醚配合物的紫外有机电致发光

采用5d-4f跃迁的稀土Ce³⁺-冠醚配合物(Ce-二环己基并-18-冠-6,Ce-DC18C6)作为发光掺杂剂,4,4'-二(9-咔唑基)联苯(CBP)为基质,设计制备了紫外发光器件:ITO/CuPc/Ce-DC18C6:CBP/Bu-PBD/LiF/Al,首次观测到峰位于376nm的Ce³⁺离子的紫外电致发光。通过对比器件的EL谱与Ce³⁺-冠醚配合物薄膜的PL谱发现,EL光谱中有部分来自Ce³⁺配合物中的Ce³⁺离子的。这种5d-4f电子跃迁的掺杂质量分数为3%时,该UV-发光器件的最大辐射功率为13μW/cm²。     

长波长大应变InGaAs/InGaAsP分布反馈激光器的材料生长与器件制备

采用低压金属有机化合物气相沉积法(LP-MOCVD)生长并制作了1.6—1.7μm大应变InGaAs/InGaAsP分布反馈激光器.采用应变缓冲层技术，得到质量良好的大应变InGaAs/InP体材料.器件采用了4个大应变的量子阱，加入了载流子阻挡层改善器件的温度特性.1.66μm和1.74μm未镀膜的3μm脊型波导器件阈值电流低(小于15mA)，输出功率高(100mA时大于14mW).从10—40℃，1.74μm激光器的特征温度T₀=57K，和1.55μm InGaAsP分布反馈激光器的特征温度相当. 关键词： MOCVD InGaAs/InGaAsP 应变量子阱 分布反馈激光器     

部分相干光束通过硬边光阑的推广光束传输M2因子

给出部分相干光通过硬边光阑后的强度二阶矩的计算公式，由此可得到部分相干光通过硬边光阑后的推广光束传输M^2因子。以部分相干高斯－谢尔模型光束为例，推导出相应的M^2因子，并作了数值计算和分析讨论。