类锂硅离子软X射线激光研究

在激光等离子体典型参数条件下，利用碰撞－辐模型计算了类锂硅离子５ｆ－３ｄ和４ｆ－３ｄ跃的粒子数反转比率和激光增益系数。讨论了不同热带条件和不同冷却速度下，激光增益系统数的变化。计算结果表明，高功率，短脉冲激光生产的高温等离子体在快速冷却条件下能产生软Ｘ射的线激光增益。     

The Existence of Periodic Orbits for Higher Dimensional Autonomous Systemswith Small Perturbations

ＴｈｅＥｘｉｓｔｅｎｃｅｏｆＰｅｒｉｏｄｉｃＯｒｂｉｔｓｆｏｒＨｉｇｈｅｒＤｉｍｅｎｓｉｏｎａｌＡｕｔｏｎｏｍｏｕｓＳｙｓｔｅｍｓｗｉｔｈＳｍａｌｌＰｅｒｔｕｒｂａｔｉｏｎｓＪｉａｎｇＬｉｑｉｎｇ（蒋里强）；ＺｈｏｕＹｉ（周毅）；ＦａｎＹｅ（范晔）（...     

关于“信息熵”分析及其应用的研究

本文用Ｓｈａｎｎｏｎ熵函数的观点及最大离散熵原理，探讨了对随机试验项目的优选问题：即压缩某种“不确定性”试验项目的实施与探索．并通过应用实例的计算，获得了满意的聚类效果．这种方法对于信息资料的数据处理及压缩“不确定性“验项目具有普遍意义．     

Interfacial effects on stress distribution in model composites

Raman mechanical spectroscopy was used to examine interfacial effects on the stress distribution in model polydiacetylene fiber/epoxy composites. Epoxy release agents were coated on fiber surfaces to modify the interfacial adhesion properties. The modified fiber surfaces were then characterized by scanning electron microscopy and x-ray photoelectron spectroscopy as well as optical microscopy. No difference in the maximum stress value or stress distribution was observed for the two types of fibers, coated or uncoated, used in composites. This suggests that adhesion properties at the composite interface do not affect tensile stress transfer efficiency nor, therefore, the composite tensile modulus along the fiber axis direction in uniaxial composites. Experimental data were also compared with theoretical calculations assuming perfect bonding between fiber and matrix, and idealized frictional force transfer mechanism at the fiber–matrix interface.     

Magnetic resonance imaging and pulsed Doppler sonography of poststenotic jets: Correlation between signal void and flow velocity distribution

To correlate the appearance of poststenotic jets on gradient echo images with features of localized Doppler spectra of the jets, we studied an in vitro model of steady flow-through stenoses of 86, 96, and 99% area reduction. As fluids, water and a 40% glycerol solution in water were used. MRI was performed with a 1.5 T whole body imager and gradient echo images were obtained in planes parallel to the direction of flow. Doppler spectra were acquired separately from the MR measurements at 1 cm intervals for a distance of 10 cm downstream from the stenosis. Poststenotic signal void was observed for water and for the 40% glycerol solution only if the mean velocity within the stenosis exceeded a limit of 50–60 cm/sec. On the MR images, the jets could be divided into two segments: A proximal jet segment of uniform width equal to the diameter of the stenosis, followed by a distal jet segment which was characterized by broadening and then dissipating signal void. Except for the 99% stenosis, a high signal intensity core was present within the proximal jet segment. In the proximal jet segment, the Doppler measurements showed a low temporal fluctuation of the maximal flow velocity and only little flow opposite to the main flow direction. In the distal jet segment, the velocity fluctuation and the intensity of reverse flow increased sharply. The high signal intensity core of the jet was associated with a poststenotic zone of constant maximal flow velocity. The results demonstrate a close relationship between characteristic features of poststenotic jets in MRI and pulsed Doppler sonography.     

OSCILLATION OF A FORCED SECOND ORDER NONLINEAR EQUATION

ＯＳＣＩＬＬＡＴＩＯＮ ＯＦ Ａ ＦＯＲＣＥＤ ＳＥＣＯＮＤ ＯＲＤＥＲ ＮＯＮＬＩＮＥＡＲ ＥＱＵＡＴＩＯＮ ￥ＫＯＮＧＱＩＮＧＫＡＩ；ＺＨＡＮＧＢＩＮＧＧＥＮＡｂｓｔｒａｃｔ：Ｔｈｉｓｐａｐｅｒｇｉｖｅｓｓｅｖｅｒａｌｃｒｉｔｅｒｉａｏｎｔｈｅｏ...     

R_2Fe_17_C化合物的结构与内禀磁性的研究

本文系统研究了R_2Fe_17_C(R=Y,Sm,Gd,Tb、Dy.Er) 化合物的结构与内享磁性, 井与相应的R_2Fe_17_C 化合物进行了比较.R_2Fe_17_C 的居里温度比相应氏R_2Fe_17 的居里温度增加大约200K. 本文讨论了C 原子对该化合物结构与磁性的影响, 同时, 还对Sm_2(Fe_1-xCo_x)_17C系列化合物进行了研充. 关键词：     

“J—646”新型光学光敏胶胶合工艺简介

“J—646”光敏胶具有透光率好,收缩率小,粘接强度适中,耐老化,毒性小和成本低廉等特点。本文简要介绍了该胶的胶合工艺。     

不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.     

HL—1装置等离子体密度反馈实验

本文叙述HL-1装置用反馈脉冲补充送气方式控制等离子体密度的方法及实验结果。给出了在固有的物理实验条件下的最佳反馈方式,实现了对密度的有效控制及反馈。讨论了在不同密度条件下的几种反馈方式及反馈系统尚存在的不足之处。