Silicon etching in Cl2 environment

The ion-beam-assisted etching of silicon in Cl₂ environment is considered. The theoretically calculated dependences of silicon etching rate on the flux of Cl₂ molecules at different ion current densities are compared with experimentally measured. The composition of the adsorbed layer is determined. It is found that SiCl₂ molecules prevail in the adsorbed layer. The reciprocal of relative concentration of SiCl₂ molecules in the adsorbed layer linearly depends on the ion-to-neutral flux ratio.     

Structural studies of Cr-doped mullite derived from single-phase precursors

Cr-doped mullites were prepared from single-phase precursors containing up to 9.60 wt% Cr₂O₃ using a sol-gel technique followed by thermal treatment. Particle induced X-ray emission spectroscopy and X-ray powder diffraction were used to characterize the samples. Mullites were orthorhombic, space group Pbam. Cr doping caused the increase of unit-cell parameters. Strongest expansion was noticed along c-axis followed by a and b (Δc/c=0.089, Δa/a=0.061, Δb/b=0.045% per mole Cr₂O₃). A second phase, namely θ-(Al,Cr)₂O₃, was revealed by XRD in the sample containing 9.60 wt% Cr₂O₃. The structure of mullites was refined by the Rietveld method, location of Cr³⁺ was performed by the EPR spectroscopy. At low chromium doping level (Cr₂O₃ content less than ∼5 wt%) Cr³⁺ ions were substituted for Al³⁺ in the AlO₆ octahedra of the mullite structure (M1 site). For higher doping level, Cr³⁺ ions were additionally substituted for Al³⁺ in the AlO₆ octahedra of the second phase [θ-(Al,Cr)₂O₃ at 1400 °C, or α-(Al,Cr)₂O₃ at 1600 °C] which segregated in the system. Substitution of Cr³⁺ for Al³⁺ on M1 site in the mullite structure resulted in increase of average distances in (M1)O₆ octahedron and decrease of average distances in T*O₄ tetrahedron, while average distances in TO₄ tetrahedron stayed almost constant.     

Conversion of single-stranded oligonucleotides into cloned duplexes and its consecutive application to short artificial genes.

A general method to convert single-stranded, chemically synthesized oligonucleotides into cloned duplexes is described. Oligonucleotides supplied with 3'-terminal extensions that are complementary to 3'-protruding ends obtained by certain restriction enzymes can be cloned either directly or with the help of an adapter molecule into double-stranded vectors. Two methods have also been developed for consecutive cloning applications. According to these methods, the synthetic oligonucleotides (and their enzymatically prepared complementary strands) are joined, one after the other, inside a cloning vector, each joining requiring one cloning step. Synthetic genes are thus built up from oligonucleotides corresponding to only one strand of the DNA. The sequential assembly of the cloned duplex takes place in the 5' to 3' direction. Each oligonucleotide is supplied with a four-nucleotide-long 3'-terminal extension, but this sequence is eliminated when the joining takes place, leaving no limiting sequence between the oligonucleotides. The two consecutive cloning methods, the adapter and the polycloning site methods, are illustrated by the assembly of short artificial genes.     

Neocompact Sets and the Fixed Point Property

We use a newly introduced concept of neocompactness to study problems from metric fixed point theory. In particular, we give a sufficient condition for a superreflexive Banach space X to have the fixed point property and obtain shorter proofs of some well-known results in that theory.     

Copper-D-penicillamine complex as potential contrast agent for MRI.

In vitro and in vivo proton T1 data are reported that demonstrate that the paramagnetic copper-D-penicillamine complex can be applied as a potential contrast agent to magnetic resonance imaging.     

Specific carbon-13 labelling of leucine residues in human growth hormone.

Biosynthetic human growth hormone specifically 13C-labelled in the carbonyl positions of all 26 leucine residues has been obtained by recombinant DNA techniques using 13C-labelled leucine and an E. coli strain that requires leucine. It is shown that, on the whole, the labelling is specific with no significant mislabelling as would have been the case had the 13C-labelled leucine been metabolized.     

Analysis of fragrance compounds in blood samples of mice by gas chromatography, mass spectrometry, GC/FTIR and GC/AES after inhalation of sandalwood oil.

After inhalation experiments with sandalwood oil and the pure fragrance compounds coumarin and alpha-terpineol, substances were detected and measured in the blood samples of test animals (mice) using gas chromatography/mass spectrometry (GC/MS) (MID) in connection with GC/FTIR (SWC), GC/AES (carbon and oxygen trace) and flame ionization detection/gas chromatography. Using tiglinic acid benzyl ester as the internal standard the following concentrations in serum could be found: alpha-santalol 6.1 ng/mL, beta-santalol 5.3 ng/mL and alpha-santalene 0.5 ng/mL. In separate inhalation experiments with coumarin and with alpha-terpineol the corresponding concentrations were 7.7 ng/mL and 6.9 ng/mL, respectively.     

Equilibrated thermodesorption studies of adsorption of n-hexane and n-heptane on zeolites Y, ZSM-5 and ZSM-11

Gravimetric measurements of thermodesorption of n-hexane and n-heptane were performed under quasi-equilibrium conditions. Differential thermodesorption profiles for ZSM-5 and ZSM-11 showed two peaks, but for Y zeolites, only one thermodesorption peak was observed. A model function, derived from the Langmiur adsorption model, was fitted to the experimental data, and the model parameters (the adsorption entropy and enthalpy) were estimated. The two-step desorption profiles observed for ZSM-5 and ZSM-11 were attributed to the commensurate freezing effect, i.e. a transition in the adsorbed phase resulting in ordering of the adsorbed molecules in the zeolite channels. The results observed for ZSM-11 indicate that the zigzag channels typical for ZSM-5 micropore system are not necessary for this transition to occur.     

Characterization of Cds clusters in zeolite-A grown in alkaline solution

CdS clusters were synthesized in A type zeolite by reaction in alkaline aqueous solution at temperatures from 30 to 70 °C. The optical properties of the samples were studied by diffuse reflectance and photoluminescence spectroscopy. Their crystalline structure and morphology were studied by X-ray diffraction and by transmission and scanning electron microscopy. We found that at lower temperatures the CdS clusters are encapsulated in the zeolite cages. We compared the properties of these clusters with those encapsulated in the cages of zeolites X and Y, prepared by similar methods. CdS clusters smaller than the CdS exciton diameter are also formed outside the cages in the zeolite matrix. The size of these clusters increases with temperature producing a red-shift of the absorption edge in the optical absorption spectra.