Reaction kinetics and pathway of hydrothermal decomposition of aspartic acid

The kinetics and pathway of hydrothermal decomposition of aspartic acid were studied using a continuous‐flow tubular reactor. The reaction was carried out in the temperature range of 200–260°C and at a pressure of 20 MPa. Deamination was the primary reaction, indicated by the presence of significant amount of ammonia, fumaric acid, or maleic acid in the products. Other reaction products were pyruvic acid, malic acid, and traces of succinic and lactic acid. Traces of alanine were also detected, showing the possibility of decomposing high‐molecular weight amino acids to obtain simple amino acids such as glycine or alanine. Results on the effect of reaction parameters demonstrated that decomposition of aspartic acid is highly temperature dependent under hydrothermal conditions. For a slight temperature difference of 60°C (from 200 to 260°C), the first‐order reaction rate constants of 0.003 significantly increased to 0.231 s^?1. The activation energy was 144 kJ/mol, as calculated by the Arrhenius equation. No significant effect was exhibited by other reaction parameters such as pH and pressure. The results are useful in controlling the hydrolysis of proteinaceous materials toward high yield of aspartic acid under hydrothermal conditions. © 2007 Wiley Periodicals, Inc. 39: 175–180, 2007     

Measurements of electron density, temperature and photoionization cross sections of the excited states of neon in a discharge plasma

In the present work emission and absorption spectroscopy have been used to determine the plasma parameters of neon in a hollow cathode discharge lamp. The excitation temperature is determined using the intensity ratio method and Boltzmann's plot method whereas the electron density is determined from the Stark broadening of the spectral lines. The behavior of the optogalvanic signal as a function of laser energy has been studied for three transitions from the 2p⁵3s [1/2]₂ metastable state following ΔJ=ΔK=0, ±1 dipole selection rules. The saturation technique has been used to measure the photoionization cross section from three intermediate states 2p⁵3p′ [1/2]_1, 2p⁵3p′ [3/2]₂ and 2p⁵3p [5/2]₃ up to the 2p^{5 2}P_1/2 ionization threshold.     

Characterization of AZ91D Granules Covered with a Flux during In‐Situ Melting

Oxidation and melting behaviors of AZ91D granules throughout the in‐situ melting process using flux were investigated. The granules were heated under unprotected environment at four different temperatures between 650 and 800 °C, for the durations of 30 and 60 min. The products of heating process were characterized macroscopically and the oxides formed on the granules were examined using field emission scanning electron microscope, energy dispersive X‐ray spectroscopy and X‐ray diffraction analysis. Thermal analysis was used to reveal the response of the granules to heating during the in‐situ melting. The results showed that the granules experienced severe oxidation even in the presence of the flux, and significant amount of them changed to a powdered state due to oxidation and combustion, especially at 800 °C. It was discovered that the granules melted during heating; however, oxides formed on their surface encapsulated the molten metal and prevented the liquids from merging. The results also revealed that increasing heating temperature and time enhanced mold‐magnesium reaction resulted in the entrance of mold materials into the oxidation residues.     

Laser pulse heating of steel surface and flexural wave analysis

Laser gas-assisted material processing finds wide application in industry. The modelling of heating, elastic response of the substrate material, and the wave analysis gives insight into the laser workpiece interaction. In the present study, laser gas-assisted heating of steel is considered. The normal component of the thermal stress is taken as the source of load for the flexural wave generation in the material. The flexural wave generated is simulated and the wave characteristics are analyzed at four locations at the workpiece surface. The numerical scheme employing a control volume approach is introduced when solving the governing equations of flow and heat transfer while finite element and spectran element methods are used when solving the stress and wave equations. It is found that the normal component of the stress is tensile. The dispersion effect of the workpiece material, interference of the reflected beam, and partial overlapping of second mode of the travelling wave enable to identify a unique pattern in the travelling wave in the substrate.     

Quantum properties of the three-mode squeezed operator: Triply concurrent parametric amplifiers

In this paper, we study the quantum properties of the three-mode squeezed operator. This operator is constructed from the optical parametric oscillator based on the three concurrent χ⁽²⁾ nonlinearities. We give a complete treatment for this operator including the symmetric and asymmetric nonlinearity cases. The action of the operator on the number and coherent states is studied in the framework of squeezing, second-order correlation function, Cauchy-Schwartz inequality and single-mode quasiprobability function. The nonclassical effects are remarkable in all these quantities. We show that the nonclassical effects generated by the asymmetric case-for certain values of the system parameters-are greater than those of the symmetric one. This reflects the important role for the asymmetry in the system. Moreover, the system can generate particular types of the superposition states.     

Neutral Kapitza-Dirac effect

A theory of diffraction of neutral atoms by a standing light wave is developed and compared with the well-known case of electrons.     

Optimization of Neutrino Oscillation Parameters Using Differential Evolution

We show how the traditional grid based method for finding neutrino oscillation parameters m2 and tan 2θ can be combined with an optimization technique,Differential Evolution(DE),to get a significant decrease in computer processing time required to obtain minimal chi-square(χ2) in four different regions of the parameter space.We demonstrate efficiency for the two-neutrinos case.For this,the χ2 function for neutrino oscillations is evaluated for grids with different density of points in standard allowed regions of the parameter space of m2 and tan 2θ using experimental and theoretical total event rates of chlorine(Homestake),Gallex+GNO,SAGE,Superkamiokande,and SNO detectors.We find that using DE in combination with the grid based method with small density of points can produce the results comparable with the one obtained using high density grid,in much lesser computation time.     

Impedance spectroscopy and investigation of conduction mechanism in BaMnO3 nanorods

BaMnO₃ nanorods were synthesized at 200 °C and atmospheric pressure using the composite-hydroxide mediated method. X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy were used to investigate the structure, size, morphology, phase purity and elemental composition of BaMnO₃ nanorods. Electrical characterization of BaMnO₃ pellet was performed at 300-400 K and in the frequency range 200 Hz-2 MHz. Temperature dependence of AC conductivity suggests that the BaMnO₃ pellet behaves as a semiconducting material and conduction across the pellet can be explained by the correlated barrier hopping model. Impedance analysis was performed using the equivalent circuit model (R₁Q₁C₁)(R₂C₂) and it suggests a single relaxation process in the BaMnO₃ pellet at a particular temperature. The analysis reveals that the BaMnO₃ pellet behaves like an n-type semiconductor material due to the presence of oxygen vacancies and some disorder. Modulus spectroscopy also supports the impedance results.