Investigation of catalytic activities by differential thermal analysis

A calorimetric method is proposed to evaluate the catalytic activity of a solid catalyst with respect to the exothermic oxidation of Volatile Organic Compounds (VOC).This method employs a differential thermal analyzer in which an inert reference and a catalytically active sample are both fluxed at a constant rate with a reactive gaseous mixture composed of an inert gas (N₂ 90% vol.), oxygen and VOC, the last typically 900 to 5000 ppm. While the temperature is varied according to a predefined cycle, the output signal due to the exothermic reaction on the catalyst is continuously recorded. The design of the test chamber, the amount of catalyst, the shape of the holders and finally the flow rate and composition of the gaseous mixture should be carefully selected in order to achieve reproducible results.     

Selective Detection of Mg2+ for Sensing Applications in Drinking Water

A new series of ligands containing the 2-(2-hydroxy-3- naphthyl)-4-methylbenzoxazole (HNBO) fluorophore showed selectivity for Mg²⁺ ions, without the interference of Ca²⁺. The most promising representative L3 resulted the best performing sensor for Mg²⁺ both in solution and embedded in an all-solid-state optode, especially towards real samples of drinkable water.     

Poly(3,4‐ethylenedioxythiophene):GlycosAminoGlycan Aqueous Dispersions: Toward Electrically Conductive Bioactive Materials for Neural Interfaces

There is an actual need of advanced materials for the emerging field of bioelectronics. One commonly used material is the conducting polymer poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) due to its general use in organic electronics. However, depending on the application in bioelectronics, PEDOT:PSS is not fully biocompatible due to the high acidity of the residual sulfonate protons of PSS. In this paper, the synthesis and biocompatibility properties of new poly(3,4‐ethylenedioxythiophene):GlycosAminoGlycan (PEDOT:GAG) aqueous dispersions and its resulting films are shown. Thus, negatively charged GAGs as an alternative to PSS are presented. Three different commercially available GAGs, hyaluronic acid, heparin, and chondroitin sulfate are used. Indeed, PEDOT:GAGs dispersions are prepared through an oxidative chemical polymerization in water. Biocompatibility assays of the PEDOT:GAGs coatings are performed using SH‐SY5Y and CCF‐STTG1 cell lines and with ATP and Ca²⁺. Results show full biocompatibility and a pronounced anti‐inflammatory effect. This last characteristic becomes crucial if implanted in the body. These materials can be used for in vivo applications, as transistor or electrode for electrical recording and for all the possible situations when there is contact between electronic circuits and living tissues.

     

Aggregation tendency and reactivity toward AgX of cationic half-sandwich ruthenium(II) complexes bearing neutral N,O-ligands

The aggregation tendency of complexes [Ru(eta6-cymene)(N,O)Cl]X [N,O = 2-benzoylpyridine (2-bzpy), 1, and 2-acetylpyridine (2-acpy), 2, X- = BPh4- or PF6-] has been studied by means of PGSE NMR experiments. It was found that complexes with PF6- as counterion are mainly present in CD2Cl2 as ion pairs at low concentration, as a mixture of ion triples and free anions at medium concentration and as ion quadruples at elevated concentration. 19F, 1H-HOESY NMR experiments revealed that in ion triples and ion quadruples two cationic Ru-units pair up. Consistently, in the solid-state structure of 1PF6, determined through X-ray single-crystal investigation, two cationic Ru-units are held together by an intermolecular pi-pi stacking interaction between the pyridyl rings. Complexes having BPh4- as counterion are only present in solution as even aggregates, namely ion pairs at low concentration and ion quadruples at elevated concentration. In such a case a counteranion bridges two cationic Ru-units as observed in the solid-state structure of 1BPh4. The reactivity of complexes 1-2 toward AgX salts has been investigated in different solvents. Bicationic [Ru(eta6-cymene)(N,O)(MeCN)]X2 (N,O = 2-bzpy, 3, and 2-acpy, 4) and [Ru(MeCN)4(N,O)]X2 (N,O = 2-bzpy, 5, and 2-acpy, 6) complexes were obtained by the reaction of 1 and 2 with AgX in the presence of three equivalents of acetonitrile or in acetonitrile, respectively. The reaction of 1 with AgPF6 in acetone afforded complex [Ru(eta6-cymene)(N,O,O)]PF6 (7, where N,O,O = 4-alcoxide-4-phenyl-4-(pyridin-2-yl)butan-2-one) from the C-C coupling of a deprotonated methyl group of the coordinated acetone and the C=O moiety of 2-bzpy ligand.     

Quantum dots-based reverse phase protein microarray

CdSe nanocrystals, also called quantum dots (Qdots) are a novel class of fluorophores, which have a diameter of a few nanometers and possess high quantum yield, tunable emission wavelength and photostability. They are an attractive alternative to conventional fluorescent dyes. Quantum dots can be silanized to be soluble in aqueous solution under biological conditions, and thus be used in bio-detection. In this study, we established a novel Qdot-based technology platform that can perform accurate and reproducible quantification of protein concentration in a crude cell lysate background. Protein lysates have been spiked with a target protein, and a dilution series of the cell lysate with a dynamic range of three orders of magnitude has been used for this proof-of-concept study. The dilution series has been spotted in microarray format, and protein detection has been achieved with a sensitivity that is at least comparable to standard commercial assays, which are based on horseradish peroxidase (HRP)-catalyzed diaminobenzidine (DAB) chromogenesis. The data obtained through the Qdot method has shown a close linear correlation between relative fluorescence unit and relative protein concentration. The Qdot results are in almost complete agreement with data we obtained with the well-established HRP-DAB colorimetric array (R² = 0.986). This suggests that Qdots can be used for protein quantification in microarray format, using the platform presented here.     

A Combined Experimental and Theoretical Study on the Stereodynamics of Monoaza[5]helicenes: Solvent‐Induced Increase of the Enantiomerization Barrier in 1‐Aza‐[5]helicene

Helicenes and heterohelicenes are attractive compounds with great potential in materials sciences to be used in optoelectronics as ligand backbones in enantioselective catalysis and as chiral sensors. The properties of these materials are related to the stereodynamics of these helical chiral compounds. However, little is known about features controlling stereodynamics in helicenes; in particular, for heterohelicenes the position of the heteroatom could be relevant in this respect. Herein the complete stereodynamic characterization of monoaza[5]helicenes is shown by enantioselective dynamic HPLC and DFT calculations. At variance with previous theoretical calculations, 1‐aza[5]helicene shows a surprisingly high enantiomerization barrier, which is triggered by specific solvent interactions.     

Chemically stable anode-supported solid oxide fuel cells based on Y-doped barium zirconate thin films having improved performance

Anode-supported solid oxide fuel cells (SOFCs) based on thin BaZr_0.8Y_0.2O_3 ? δ (BZY) electrolyte films were fabricated by pulsed laser deposition (PLD) on sintered NiO–BZY composite anodes. After in situ reduction of NiO to Ni, the anode substrates became porous, while retaining good adhesion with the electrolyte. A slurry-coated composite cathode made of La_0.6Sr_0.4Co_0.2Fe_0.8O_3 ? δ (LSCF) and BaCe_0.9Yb_0.1O_3 ? δ (BCYb), specifically developed for proton conducting electrolytes, was used to assemble fuel cell prototypes. Depositing by PLD 100 nm thick LSCF porous films onto the BZY thin films was essential to improve the cathode/electrolyte adhesion. A power density output of 110 mW/cm² at 600 °C, the largest reported value for an anode-supported fuel cell based on BZY at this temperature, was achieved. Electrochemical impedance spectroscopy (EIS) measurements were used to investigate the different contributions to the total polarization losses.     

Some cyclization reactions of 1,3-diphenylbenzo[e][1,2,4]triazin-7(1H)-one: preparation and computational analysis of non symmetrical zwitterionic biscyanines

Regioselective nucleophilic addition of bisnucleophiles 1,2-benzenediamine, 2-amino-benzenethiol, and N-phenyl-1,2-benzenediamine to 1,3-diphenylbenzo[e][1,2,4]triazin-7(1H)-one (1) at C6 followed by intramolecular cyclocondensation at the C7 carbonyl afforded highly coloured tetracenes 1,3-diphenyl-1,6-dihydro-[1,2,4]triazino[5,6-b]phenazin-4-ium 4-methylbenzenesulfonate (12), 1,3-diphenyl-1H-[1,2,4]triazino[6,5-b]phenothiazine (14) and 1,3,11-triphenyl-1,6-dihydro-[1,2,4]triazino[5,6-b]phenazin-11-ium 4-methylbenzenesulfonate (15), respectively. Neutralization of the latter with alkali gave the free base 1,3,11-triphenyl-1H-[1,2,4]triazino[5,6-b]phenazin-11-ium-6-ide (16). Furthermore, the benzotriazinone 1 reacts with dimethyl malonate to give 6-(methoxycarbonyl)-7-oxo-1,3-diphenyl-7H-benzofuro[5,6-e][1,2,4]triazin-1-ium-4-ide (17) in 74% yield, while with S(4)N(4) [5,6-c]-thiadiazolo-7-oxo-1,3-diphenyl-1,2,4-benzotriazine (22) was formed in 15% yield. The free bases 16 and 17 display negative solvatochromism, which supports charge separated ground states similar to those of zwitterionic biscyanines, and DFT calculations at the UB3LYP/6-31G(d) level afford ΔE(ST) values of -13.6 and -18.7 kcal mol(-1), respectively that strongly favour the singlet ground state. All ring systems described are new and fully characterized.     

Synthesis of chiral β-3-amino-2-hydroxyalkanoates and 3-alkyl-3-hydroxy-β-lactams by double asymmetric induction

Reactions of chiral (2S)-enolates of dioxolan-4-ones, derived from lactic, mandelic, and phenyllactic acids, with aliphatic (S_S)- and (S_R)-tert-butylsulfinyl aldimines afforded conformationally restrained C2-disubstituted N,O-orthogonally protected 3-amino-2-hydroxyalkanoates in the form of N-sulfinyl protected 1′-aminodioxolan-4-ones. The product distribution showed that there is significant kinetic selectivity, due to the presence of ‘matched’ and ‘mismatched’ components, between the (S)- or (R)-tert-butylsulfinyl aldimines and the (2S)-enolates of the 1,3-dioxolan-4-ones. Selective methoxide-induced removal of the acetal group of the N-sulfinyl-1′-aminodioxolanones yielded the corresponding N-sulfinyl protected methyl alkanoates. In addition, the selective acid-induced removal of the sulfinyl group of the N-sulfinyl-1′-aminodioxolanones provided the corresponding N-unprotected 1′-aminodioxolanones, whose base-induced cyclization afforded the corresponding β-lactams.