芳香叔胺引发丙烯腈光聚合研究

我们发现芳香叔胺是丙烯腈聚合极有效的光引发剂。芳香叔胺苯环上氢被正性基取代时,引发能力增加,被负性基取代时,引发能力下降。下列胺的活性次序是:N,N-二甲基对甲苯胺(DMT)>N,N-二羟乙基对甲苯胺(DHET)>N,N-二甲基苯胺(DMA)>N,N-二甲胺基苯甲醛(DMB)>N,N-二甲基对硝基苯胺(DNA)。芳香叔胺引发丙烯腈光聚合属自由基机构,聚合速度与叔胺浓度的0.66次方成正比。在叔胺浓度为10~(-2)—10~(-4)M范围内,聚合物平均聚合度的倒数与叔胺浓度的0.5次方成正比。初步认为在紫外光激发下,芳香叔胺与丙烯腈分子生成激发态电子转移络合物,再分解产生自由基,引发丙烯腈聚合。     

二乙基二硫代氨甲酸银体系流动注射法测定砷

本文设计了一种ＡｇＤＤＣ流动注射－分光光度法测定砷的系统。该系统采用自制的氢化物发生及吸装置，将液体流路和载气流路结合在一起。     

双酚-S-双(3-甲基丙烯酰氧基-2-羟丙基)醚的聚合及其应用

以MMA为起始原料经转变为GMA,再与双酚-S反应合成了一种新的含有砜基的交联剂BisS-GMA。这种双酚-S型交联剂与MMA可以顺利地用紫外光或BPO-胺体系引发聚合。新的双酚-S型交联剂BisS-GMA与双酚-A型交联剂Bis-GMA相比,具有活性高与粘结强度高两个显著优点。它还可以和二氧化硅填料混合组成复合树脂,经光引发或BPO-DHET体系引发聚合,得到的复合树脂其物性已达到国外同类产品的水平。DHET作为促进剂要比DMT性能好,前者配制的交联剂液体组份贮存稳定性好,经半年后而不“失活”,后者配制的液体组份则在较短的时间内“失活”。     

A spectroscopic study of cobalt(III) furyldioximates

Summary The electronic properties of a series of cobalt(III)trans-furyldioximato-complexes of the type [CoB(FH)₂X] (B=NH₃, X=Cl, Br, I or NO₂; B=pyridine (py) or thiocarbamide (thio), X=Cl or Br; B=imidazole (imid), X=Br), [Co(FH₂)(FH)Cl₂] and [Co(thio)₂(FH)₂]NO₃ were studied by i.r., u.v. and¹H and¹³C n.m.r. spectra The results were compared with those from the corresponding dimethylglyoximato-complexes. It was concluded that -conjugation over the equatorial plane in the furyldioximates is greater than in the dimethylglyoximates. There is some evidence of thetrans-influence of the anionic ligands in the ammines which are in the order NO ₂ ^– >Br^–>Cl^–.     

用裂解气相色谱法对几株霉菌的分析

本文用带有PYR-2A管式炉裂解器和C-R2AX计算机的岛津GC-9A气相色谱仪,对3株曲霉和3株青霉进行了裂解气相色谱鉴别。通过对指纹图的分析,能够较好地区分出两属之间和各菌株之间的差异,证明了裂解气相色谱分析法用于霉菌鉴别的可能性。     

铜（Ⅱ）锌（Ⅱ）－氟哌酸体系电化学行为及示波极谱法研究

铜（Ⅱ）和锌（Ⅱ）分别在０．１ｍｏｌ／ＬＫＨ＿２ＰＯ＿４－Ｎａ＿２ＨＰＯ＿４缓冲溶液（ｐＨ６．５）和０．２５ｍｏｌ／ＬＮＨ＿４Ｃｌ溶液中，与氟哌酸形成良好的络合吸附波，峰电位分别为－０．２６Ｖ和－１．２８Ｖ（ｖｓ；ＳＣＥ）；络合比分别为１：３和１：２；峰电流与铜（Ⅱ）和锌（Ⅱ）的浓度均在４．０×１０￣（－７）～５．０×１０￣（－６）ｍｏｌ／Ｌ范围内呈线性关系，检测限分别为７．０×１０￣（－８）和５．０×１０￣（－８）ｍｏｌ／Ｌ。用线性扫描和循环伏安法等手段研究体系的行为，表明均具吸附性，而铜（Ⅱ）－氟哌酸体系属络合物中铜（Ⅱ）的两电子还原的可逆过程。     

水溶液中降冰片二烯衍生物敏化学异构化反应

研究了水溶液中双环［２，２，１］－２，５庚二烯－２，３－二羧酸在吖和吖啶橙的敏化作用下的光诱导价键异构化反应。量子效率分别为０，３３（ＡＹ）和０，３１（ＡＯ）。     

STRUCTRE AND PROPERTIES OF COMPOSITE Ni/HARD CARBON FILMS PREPARED BY PLASMA DEPOSITION

IntroductionHardcarbonfilmsprcparcdb}'vari0usplasmaprocesscsareofc0nsidcrablcinterestbccauscofthcirunusualmcchanical-opticalandelcctricalpropertiesll~3l.Rccently,ithasReceive(IJl111c5,l9`)5;,.`,1iis()tI1ie)\tioII,1'ceil'edJtl1)'l4,l995*'I11isprojectiss[1pportcdh}tl1cNatiol1a1Nat[lntlScicl1ccI`()ul1dati()l1ofCl1il1aal1dtl1eI,aboraton'ofSolidI,ubricati()l1,l.al1/l10ulnstitutcofCl1cn1icalPh\'sics,111cChincscAcadcl11\'ofScicnccs.benfoundthattheinc0rporati0nofmetaIintocarbonfilmscangrcatl}'…     

Chromatographic characterization of molecularly imprinted microspheres for the separation and determination of trimethoprim in aqueous buffers

Molecularly imprinted microspheres (MIMs) against trimethoprim (TMP), prepared by aqueous microsuspension polymerization, bound strongly to TMP, by electrostatic and other non-covalent interactions. The effects of pH, kind and ionic strength (I) of buffer on capacity factors (k') have been discussed in detail. The capacity factors for TMP increased with increasing pH of both acetate and phosphate buffers. The effects of ionic strength on capacity factors were very substantial and the linear relationship between logk' and logI was described by the equation logk'=0.3162-0.4420logI with R=-0.9995. The results showed that pH 3.5 acetate buffer (0.05 mol L(-1)) containing 0.1 mol L(-1) sodium chloride and a 1:9 ratio of buffer to methanol were the optimum conditions for separation and determination of TMP. The calibration plot of peak area against concentration was linear with R=0.9979.     

DRY METHOD SYNTHESIS OF PURE SILICEOUS FORM OF ZEOLITE ZSM-35

IntroductionZeoliteZSM-35isclassifiedasfcrricritc(FER)t\pc.x'hicllalsoincludesZSM-ZI.ZSM-38andFER.Zeolitesofthist}'pcha\lcrclatit'CI}UlldiscrinlinablcXRDpattcnlswhichindicatetheirsinlilarit\'illst,u.tu,.,I11.Thehighsiliceousfonllsofthesezeolitesarcgcllcra…