BEPCII直线加速器数字延时触发器的设计与实现

针对北京正负电子对撞机II期（BEPC II）直线加速器升级改造过程中束流位置探测器（BPM）电子学对外部触发信号的需求,设计了一台高精度延时控制、上升时间短和参数灵活调节的数字延时触发器。采用FPGA（现场可编程门阵列）作为主控制器展开设计,重点介绍了基于FPGA的边沿检测模块和多通道延时处理模块的设计与仿真,描述了FPGA和驱动电路的设计方案以及在直线加速器上的应用。经测试,延时可调范围4 ns～4 μs,最小步进4 ns,步进误差0.125%;上升时间2 ns,延时抖动135.4 ps。     

Non-uniformity correction algorithm for IRFPA based on motion controllable micro-scanning and perimeter diaphragm strips

Non-uniformity correction is the key issue for the image quality improvement of infrared focal panel array (IRFPA) imaging. A non-uniformity correction (NUC) algorithm for IRFPA based on motion controllable micro-scanning platform and perimeter diaphragm strips is presented. We initially execute one-point calibration to the perimeter detectors, then based on controllable motion of adjacent frames, a special algebraic algorithm is proposed to transport the calibration of the perimeter detectors to those interior un-corrected ones. In this way, the bias parameter of the whole field of view (FOV) is calculated. The algorithm can be easily combined with sub-pixel imaging, thereby improving the quality of thermal imaging system (image spatial resolution and uniformity). All calculations are algebraic, with a low computation load. The algorithm can realize adaptive one point calibration without covering the central FOV rapidly. Experiments on simulated infrared data demonstrate that this algorithm requires only dozens of frames to obtain high quality corrections.     

Preparation and photocatalytic property of CeO2 lamellar

A novel room temperature solid-state chemical synthesis was introduced to successfully fabricate CeO₂ samples, coupled by a polyethylene glycol 400 (PEG 400)/cetyl trimethylammonium bromide (CTAB)/sodium dodecyl sulfate (SDS). The as-prepared products were characterized by XRD, TEM, SEM, BET and UV. A study of photocatalytic degradation of the methylene blue MB under UV illumination has been carried out. It is indicated that the samples exhibit excellent photocatalytic activity. Besides, the samples assisted with surfactants possess higher photocatalytic activity than the sample without any surfactants, wherein the sample with SDS as an additive shows the highest photocatalytic activity, which is able to reach 89.6% MB degradation ratio within 60 min illumination. Moreover, the effects of important operational parameters such as initial MB concentration, catalyst loading and pH were also investigated. The above sample under the optimum conditions obtained the maximum MB degradation ratio up to 96.5%, which is higher than that of the commercial TiO₂ P25 under the same conditions. It can be concluded that CeO₂ will be a potential photocatalyst in the application of organic pollutant.     

Effect of ultrasonic irradiation on structure and electrochemical properties of LiMn2O4 thin films cathode material for Li-ion micro-batteries

Two kinds of spinel LiMn₂O₄ thin film for lithium ion micro-batteries were successfully prepared on polycrystal Pt substrates by spin coating methods, which were carried out under ultrasonic irradiation (USG) and magnetic stirring (MSG), respectively. The microstructures and electrochemical performance of LiMn₂O₄ thin films were characterized by thermogravimetry analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM), and galvanostatic charge-discharge measurements. It was found that the crystalline structure of USG samples grew better than that of the MSG samples. At the same time, higher discharge capacity and better cycle stability were obtained for the LiMn₂O₄ thin films of USG at the current density of 50 μAh/cm² between 3.0 and 4.3 V. The 1st discharge capacity was 57.8 μAh/cm²-μm for USG thin films and 51.7 μAh/cm²-μm for MSG thin films. After 50 cycles, 91.4% and 69% of discharge capacity could be retained respectively, indicating that ultrasonic irradiation condition during spin coating was more suitable for preparing spinel LiMn₂O₄ thin films with better electrode performance for lithium ion micro-batteries.     

Adsorption of CO, NH3 and O2 on Fe site of La0.875Sr0.125FeO3 (0 1 0) surface by density function theory calculation

The adsorption of CO, NH₃ and O₂ gas molecules on Fe site of La_0.875Sr_0.125FeO₃ (0 1 0) surface has been investigated based on the density functional theory (DFT) with the spin polarized generalized gradient approximation (GGA). The optimal adsorption orientations as well as the adsorption energies for these molecules adsorption on Fe site of La_0.875Sr_0.125FeO₃ (0 1 0) surface are derived. Results show that adsorption configurations with C-down for CO, N-down for NH₃ are stable. For the O₂ molecule adsorption, the mode with an angle about 120° between the oxygen molecule and La_0.875Sr_0.125FeO₃ (0 1 0) surface is stable.     

Construction of the elliptic Gaudin system based on Lie algebra

Gaudin model is a very important integrable model in both quantum field theory and condensed matter physics. The integrability of Gaudin models is related to classical r-matrices of simple Lie algebras and semi-simple Lie algebra. Since most of the constructions of Gaudin models works concerned mainly on rational and trigonometric Gaudin algebras or just in a particular Lie algebra as an alternative to the matrix entry calculations often presented, in this paper we give our calculations in terms of a basis of the typical Lie algebra, A _n , B _n , C _n , D _n , and we calculate a classical r-matrix for the elliptic Gaudin system with spin.      

磁约束聚变的进展与球形环

自１９９１年１１月以来,从ＪＥＴ、ＴＦＴＲ和ＪＴ－６０Ｕ装置的氘－氚聚变系统运行中所获得的有价值的成果表明,现已有能力研究和设计ＩＴＥＲ和先进的托卡马克型聚变堆．ＩＴＥＲ分两个阶段的设计活动（ＣＤＡ、ＥＤＡ）可于１９９８年７月完成,其中包括安全分析及实验评估在内的聚变动力堆的设计全过程．但昂贵的建造费用已成为ＩＴＥＲ进一步开发的主要矛盾,一种改进型托卡马克——球形环有可能会解决这个问题,主要借助于最小尺寸和简化结构来降低费用．文中描述了动力、实验球形环和混合堆的特征与初步参数． Since Nov. 1991 JET, TFTR, JT 60U have contributed to valuable operating experience with D T reaction systems, and have validated abilities to design ITER. Two steps of ITER design (CDA, EDA) will be finished in July 1998. The whole design process of fusion power reactor has been considered in detail, including safety analysis and experimental valuations, but the high cost of construction becomes a main contradiction in futher developent. An advanced type of Tokamak spherical torus might...     

原子距边矢量、三键数与烷烃的13C NMR化学位移

提出一个新的原子描述符-原子距边矢量(μ)来表达碳原子在烷烃中所处环境信息,用该矢量和三键数作为参数与烷烃碳原子(含2~9个碳原子共63个烷烃分子,计326个不等价碳原子)的¹³C NMR化学位移相关联,得到的多元线性回归分析结果为:标准偏差S仅0.9629ppm,相关系数R为0.9957.用所得线性方程预测得精度为:误差在1.0,1.5和2.0ppm以内的分别占83%,90%和95%.