基于咪唑羧酸配体镉(Ⅱ)配合物的合成、结构调控及其性质表征

利用水热法，以2-（4-羧基-苯基）咪唑-4，5-二羧酸（H₃L）为主配体，在辅配体1，10-菲咯啉（1，10-phen）和1，4-二（1-咪唑基）苯（dib）的调控作用下得到2个新的镉（Ⅱ）配合物：[Cd₂（HL）₂（1，10-phen）₂（H₂O）₂]（1），{[Cd （HL）（dib）_0.5（H₂O）₂]·2H₂O}_n（2）。并通过单晶X射线衍射、元素分析、热重分析、粉末X射线衍射、红外光谱、Hirshfeld表面分析和密度泛函理论量化计算对1和2进行了分析和表征。配合物1和2均属于三斜晶系和P1空间群，且1为零维结构，2为一维链状结构。     

运用综合手段研究铅锌硫化物精矿的氧化和鉴定其产物

南京关口每年从国外进口铅、锌精矿达几百万吨,随着我国国民经济的发展,作为重要有色金属来源的该矿种的进口量仍将逐年增加。硫化物精矿在运输和储存过程中都有可能发生氧化,由此导致金属品位的波动是常见现象,然而此前在这方面的报导甚少。为此,作者以铅锌硫化物精矿为例对其进行了模拟状态下的氧化实验并采用能谱、光学显微镜、化学物相分析、X射线衍射分析、扫描电镜等手段对氧化前及氧化后的样品进行了鉴定。结果表明,在模拟精矿储运条件下两种精矿的氧化皆甚为明显,铅精矿为1.5%,而锌精矿达到了14.5%,由此引起的品位变化是不可忽视的。鉴于有色金属硫化物精矿在储运过程中呈现了它们的易氧化性并对品位产生影响,所以有关这类矿产品的商贸过程中涉及取样、样品加工和保管、公证等问题,均应在科学实验基础上规范化。     

NiFe2O4对刚果红的光催化降解性能研究

采用水热法合成了尖晶石型NiFe₂O₄,并利用X射线粉末衍射仪对其物相进行了表征,利用紫外-可见分光光度计对其光催化降解刚果红的性能进行了研究。以刚果红为光催化降解底物,探究了刚果红初始浓度、催化剂用量、溶液pH、不同光源等因素对NiFe₂O₄光催化降解刚果红活性的影响。结果表明,当刚果红溶液浓度为20 mg/L、催化剂NiFe₂O₄的用量为0.065 g、pH 2~10、在太阳光下照射480 min时,刚果红的降解率高达99%以上,催化剂性能稳定,适合处理刚果红类有机污染物。     

Preparation of ethyl levulinate from wheat stalk over Zr(SO4)2/SiO2

A series of Zr(SO₄)₂/SiO₂ solid acid catalysts with different Zr(SO₄)₂ loadings were prepared by water-soluble-impregnation method at room temperature. Then, the prepared catalysts were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy and energy-dispersive X-ray spectrum, X-ray diffraction, adsorption/desorption of N₂, and temperature-programmed desorption of NH₃. The results showed that the active component Zr(SO₄)₂ was successfully adhered to the mesoporous SiO₂, and the acid amount of Zr(SO₄)₂/SiO₂ increased with the increasing of the Zr(SO₄)₂ loadings. Finally, the wheat stalk was used as raw material and depolymerized over Zr(SO₄)₂/SiO₂ to produce ethyl levulinate (EL). The reaction mixture was separated and purified by filtration and vacuum distillation. The kinetic characteristics and the reaction pathway were also studied. A comparative study showed that 20 wt.% Zr(SO₄)₂/SiO₂ exhibited higher catalytic activity. When reaction temperature, time, catalyst dosage and Zr(SO₄)₂ loadings were 190 °C, 50 min, 20 wt.% and 30 wt.%, the EL yield reached a maximum of 17.14%. The relative content of EL exceeded 90% after three steps of distillation.     

Microwave-assisted Catalyzed Synthesis and In vitro Bioactivity Evaluation of Benzimidazoles Bearing Phenolic Hydroxyl

An efficient and facile method was introduced for the synthesis of benzimidazoles in this paper. The optimum reaction conditions were determined. A series of benzimidazoles bearing phenolic hydroxyl(2a-2t) were synthesized in moderate to excellent yields starting from differently substituted hydroxyl benzaldehyde and 4-position substituted o-phenylenediamine via nucleophilic addition in the presence of catalyst Na₂S₂O₅ under microwave irradiation condition. Herein, effects of the catalyst, molar ratio of reactants, reaction temperature and solvent were investigated. The optimal reaction condition was determined. The effect of DMF and EtOH solvent on the reaction was compared. The synthesized compounds were characterized by FTIR, HRMS, ¹H NMR and ¹³C NMR spectroscopy. Further, the bacteriostatic activities of the synthesized compounds were evaluated with ciprofloxacin and itraconazole as a positive control, respectively. Compounds 2b, 2n, 2q and 2r exhi-bited some antibacterial activity. The lowest MIC of antibacterial activity of compound 2b was 32 μg/mL. Meanwhile, the luminescence property of compound 2b was studied. The antibacterial activity of compound 2b, along with their good fluorescence performance highlighted the potential of these compounds as lead structures and owned fluorescence trace for further study towards the development of novel drugs and functional mechanisms in living organisms.     

Oxide Nanofibers as Catalysts Toward Energy Conversion and Environmental Protection

Ultrathin oxide nanofibers are widely used in an array of catalytic applications toward energy conversion and environmental protection. Remarkable progress has been made with regard to the development of engineering oxide nanofibers into unique structures to suit or enable various functions. We aim to provide a comprehensive overview of oxide nanofibers, including the structure engineering, derivates, assemblies and their applications. We begin with a brief introduction to the production of nanofibers with diversified compositions, structures and properties, followed by discussions of the wet-chemistry derivates. Afterward, we discuss the applications of catalytic oxide nanofibers, including electrocata-lysis, photocatalysis and thermal-catalysis. Then we highlight the most significant role of oxide nanofibers as catalyst support for the immobilization of metal nanoparticles. Moreover, we showcase the advanced assemblies based on oxide nanofibers, including their use as multi-functional membranes and foams. In the end, we offer perspectives on the challenges, opportunities and new directions for future development.     

手性金属-有机骨架[Cu_3(HL)_2(L)_2(bpy)_3]·4H_2O用于高效液相色谱拆分手性化合物

手性金属-有机骨架材料(MOFs)作为一种新型多孔材料,由于具有比表面积大、结构多样、孔尺寸可调和化学稳定性良好等特点,而备受色谱分离领域的关注。该文以(1R,2R)-1,2-环己烷二甲酸(H2L)和4,4'-联吡啶(bpy)为配体与铜离子反应,通过溶剂热法合成了一种具有二维手性网状结构的手性MOF[Cu_3(HL)_2(L)_2(bpy)_3]·4H_2O。将该手性MOF作为手性固定相制备了高效液相色谱柱。为了考察MOF[Cu_3(HL)_2(L)_2(bpy)_3]·4H_2O的手性识别能力,在正相色谱(流动相:正己烷-异丙醇)条件下,对一系列外消旋化合物在手性MOF柱上进行了拆分。该手性MOF柱对醇类、酮类、酸类、环氧化合物和醚类等10种手性化合物表现出较好的拆分效果。对该手性MOF柱的重现性、稳定性作了评价,考察了进样量对分离效果的影响,结果表明该手性MOF柱具有较好的重现性和稳定性。     

免疫分析技术在农药残留分析中的研究进展及在中药中的应用展望

中药材的农药残留问题一直是人们关注的重点,免疫分析技术作为一项特异性强、灵敏度高的快速分析检测技术,在实现中药材农药残留快速筛查方面发挥着重要作用.该文结合近年免疫分析相关研究进展,对不同的免疫分析技术在中药农药残留分析方面的应用、技术优势以及局限性进行总结分析,并对免疫分析技术的发展前景进行了展望,对免疫分析技术在农...     

快速蒸发电离质谱技术及其应用研究进展

近年来,原位电离质谱技术成为质谱分析领域的研究前沿和热点.快速蒸发电离质谱技术源于外科手术中的手术烟雾现象,自2009年报道以来,作为一种新型原位电离质谱技术已被广泛应用于医学、微生物鉴定、食品真伪鉴别、代谢物研究、药用植物成分鉴定等领域.该技术通过电离切割组织或其他生物样品产生的含丰富特定区域生物特征的气溶胶,对其进...     

SC-ICP-MS法测定金属元素的方法研究

为了使用单细胞电感耦合等离子体质谱(SC-ICP-MS)方法准确测定单个细胞中的铬(Cr)、锰(Mn)、铁(Fe)、铜(Cu)和锌(Zn)等多种内源性金属元素,该文基于动态反应池(DRC)模式对目标分析物的反应气流量和极杆抑制参数q(RPq)进行了优化,并研究了进样速度、细胞密度、驻留时间等因素对SC-ICP-MS检测...