生产井开发指标的分层分方向定量计算方法

针对注水开发的多层砂岩油藏分层动态分析难度大等问题,在常规井层开发指标计算基础上,结合动、静态劈分方法,综合考虑渗透率、孔隙度、地层系数、含水饱和度、位置系数、措施系数及注水量系数,提出了一种既可将油、水井作为统一整体,又可对小层、方向流动分量开发指标进行定量计算的体现渗流力学本质的方法。用大庆油田N2-O1井组的产液剖面资料进行验证。结果表明,所提方法的计算结果与测量结果吻合度较高,精度平均值达75.11%。用该方法计算开发指标,适用性强,能较真实地反映各小层、各方向的产液情况,对现场应用具有指导意义。     

三角B-B曲面在非结构网格生成中的应用

基于生成非结构化网格的Delaunay三角形化方法,应用三次三角Bernstein-Bézier曲面来控制网格点的分布情况。对于给定边界,利用三次非均匀B样条进行边界的拟合及重新离散。对初始化形成的Delaunay三角形,应用三次三角Bernstein-Bézier曲面来计算位于其中的点的长度标尺,通过对三角Bernstein-Bézier曲面边界点的定义来控制三角形内长度标尺的分布。对复杂通道网格剖分的实例表明,此方法可以很好地控制内部网格点的分布情况。     

浅谈如何合理性选配和组建物理实验仪器系统

介绍了浙江大学物理实验中心合理性选配和组建物理实验仪器系统的方法和经验,并以光学实验室为例展开探讨.     

2.0μm附近模拟呼吸气体中~(13)CO_2/~(12)CO_2同位素丰度的高精度实时在线测量

采用可调谐二极管激光吸收光谱技术,结合一新型多通池搭建了一套模拟呼吸气体中CO_2同位素丰度的测量装置.气体的压强、温度和流速被很好地控制且均能保持长期的稳定性;采用三次多项式拟合光谱基线,对光谱进行归一化,很好地消除了功率变化对测量结果的影响;利用移窗-回归技术消除频率漂移对同位素丰度测量的影响.实验结果表明:移窗-回归法的引入不仅延长了系统的稳定时间,还提高了系统的测量精度;小波去噪的应用获得了比多光谱平均法高2倍的信噪比;系统的稳定时间为100 s;Kalman滤波后系统测量精度为0.067‰.     

基于LIBS及时间分辨特征峰的激光除漆机理研究

激光除漆是一种高效、清洁的新型清洗技术,对激光除漆物理过程和机理的研究是该技术发展的关键。基于LIBS技术,测量得到油漆去除过程中等离子体的发光光谱,计算出油漆样品去除前后等离子体的电子密度和温度,研究了油漆中特征元素对应的光谱特征峰强度随时间的变化情况。结果表明,随着激光作用脉冲数量的增加,油漆去除深度逐渐增加,等离子体电子密度和温度在将漆去除干净的最后几个脉冲作用时呈下降趋势。油漆中Ti元素的所对应的特征峰信号持续时间为2个μs,油漆去除前后信号强度呈现跳跃减少,该现象可用于快速、准确、实时的判断油漆去除情况。     

Cerium oxide nanoparticles protect primary mouse bone marrow stromal cells from apoptosis induced by oxidative stress

The sintering of a silver (Ag) nanoparticle film by laser beam irradiation was studied using a CW DPSS laser. The laser sintering of the Ag nanoparticle thin film gave a transparent conductive film with a thickness of ca. 10 nm, whereas a thin film sintered by conventional heat treatment using an electronic furnace was an insulator because of the formation of isolated silver grains during the slow heating process. The laser sintering of the Ag nanoparticle thin film gave a unique conductive network structure due to the rapid heating and quenching process caused by laser beam scanning. The influences of the laser sintering conditions such as laser scan speed on the conductivity and the transparency were studied. With the increase of scan speed from 0.50 to 5.00 mm/s, the surface resistivity remarkably decreased from 4.45 × 10⁸ to 6.30 Ω/sq. The addition of copper (Cu) nanoparticles to silver thin film was also studied to improve the homogeneity of the film and the conductivity due to the interaction between the oxidized surface of Cu nanoparticle and a glass substrate. By adding 5 wt% Cu nanoparticles to the Ag thin film, the surface resistivity improved to 2.40 Ω/sq.     

Beam bending through compound structure with two subwavelength metallic slits in each period

To provide a more practical, easy-to-implement method to achieve directional modulation with a plasmonic lens, beam manipulation method via compound metallic gratings with two subwavelength slits filled with different dielectrics inside each period is proposed and numerically investigated by finite-difference time-domain (FDTD) method. Compared with conventional metal-grating based structures, phase retardation is tuned by the Fabry-Pérot (FP) resonant condition and light bending is achieved by constructing a carefully designed, curved phase front for the plasmonic lenses. Our designs have advantages in ease of fabrication and capability to perform in the far field. With these advantages, the designs are expected to be valuable in applications such as plasmonic circuits and photonic communication.     

Effects of Annealing on Schottky Characteristics in A1GaN/GaN HEMT with Transparent Gate Electrode

A1GaN/GaN heterostructure transistors are promising for power and switching applications. In addition, the transparent wide band-gap A1GaN/GaN heterostructure systems have received considerable attention to transparent electronics. Nowdays, Al-doped ZnO （AZO） thin film plays an increas- ingly important role in various fields of transparent electronics.The AZO-gated A1GaN/GaN HEMT with good dc characteristics and frequency character- istics has been reported. Annealing is widely used to improve the electri- cal characteristics of A1GaN/GaN HEMTs. It is re- ported that the Schottky leakage current can be re- duced by over four orders of magnitude by annealing in an A1GaN/GaN heterostructure with ITO/Ni/Au electrode. Pei et al. reported that the transparency of Ni/ITO gates of A1GaN/GaN HEMTs has been sig- nificantly improved after annealing. However, the evaluation of Schottky C V characteristics was ab- sent. Up to now, few results are reported on the Schot- tky annealing characteristics of AZO in A1GaN/GaN HEMT. Thus the effects of annealing on the leakage current, transparency and interface states character- istics need further study.     

基于Contourlet域隐马尔可夫树模型的图像融合算法

本文提出一种基于Contourlet域隐马尔可夫树(HMT)模型的图像融合算法。由于Contourlet变换能克服小波变换在处理高维信号时的不足,它比小波变换具有更好的方向性、较高的逼近精度和更好的稀疏表达性能。而HMT模型能有效捕获尺度间、尺度内的contourlet系数特性。因此将Contourlet域HMT模型应用于图像融合领域,能充分挖掘数据之间的相关性,更好的提取图像边缘特征,为融合提取更多的特征信息。实验结果表明本文的算法获得的融合图像视觉效果良好,是一种有效且可行的融合算法。     

温度和加热时间对大气环境中纯铁光谱发射率的影响

纯铁的光谱发射率受温度的影响很大,尤其是在大气环境中,由于温度升高加剧了表面的氧化,导致其光谱发射率发生了“无规律”变化。基于基尔霍夫定理,利用研制的反射法光谱发射率测量装置对纯铁1.55μm波长的光谱发射率进行了系统的研究,探讨了温度、加热时间等因素对纯铁光谱发射率的影响。研究结果表明：纯铁的光谱发射率随着温度的升高而增大,并且在一定的温度下出现了峰值和谷值,通过分析有氧化层时金属的发射率模型,解释了这种现象的发生。恒温长时间测量结果表明,在不同的温度下,加热时间对光谱发射率的影响不同。研究结果将进一步丰富纯铁的光谱发射率数据,并为其光谱发射率在大气环境中的应用提供了实验依据。