Effective Removal of Tetracycline by Using Biochar Supported Fe3O4 as a UV-Fenton Catalyst

Novel Fe3O4-decorate hierarchical porous carbon skeleton derived from maize straw(Fe3O4@MSC)was synthesized by a facile co-precipitation process and a calcination process,which was developed as a UV assisted heterogeneous Fenton-like catalyst.The as-synthesized catalysts were characterized via X-ray powder diffraction(XRD), scanning electron microscope(SEM),transmission electron microscope(TEM),Brunauer-Emmet-Teller(BET)and vibrating sample magnetometer(VSM)at room temperature.The morphology and structure analysis revealed that the as-prepared Fe3O4@MSC retained the original pore morphology of the maize straw material.The non-uniform poly- hedral Fe3O4 grew on the whole surface of the MSC,which reduced the aggragation of Fe3O4 and provided more active sites to strengthen the UV-assisted Fenton-like reaction.As a result,the tetracycline(TC)degradation efficiency after 40 min reaction and total organic carbon(TOC)removal efficiency after 2 h reaction of Fe3O4@MSC catalyzing UV-Fenton system reached 99.2%and 72.1%,respectively,which were more substantial than those of Fe3O4@MSC/H2O2(31.5%and 2%),UV/H2O2 system(68%and 23.4%)and UV/Fe3O4/H2O2(80% and 37.5%).The electron spin resonance(ESR)results showed that the ·OH played an important role in the catalytic reaction.A possible degradation pathway of TC was proposed on the basis of the identified intermediates.Overall,the UV assisted heterogeneous Fenton-like process in Fe3O4@MSC improved the cycle of Fe^3+/Fe^2+ and activated the interfacial catalytic site,which eventually realized the enhancement of degradation and mineralization to tetracycline.     

Enhanced Peroxymonosulfate Activation by NixCo1-xOOH for Efficient Catalytic Oxidation of Organic Pollutants

Peroxymonosulfate(PMS) has received increasing attention as viable technology for recalcitrant organics removal from polluted waters. Although promising, alternative heterogeneous catalysts with stable structure, strong hydrophilicity, environmental friendliness and excellent catalytic performance are highly desirable to facilitate the wide industrialization of PMS. In this work, Ni doped CoOOH catalyst was employed as PMS activator. Ni dopant had a significant influence on the morphology, structure and catalytic performance of CoOOH. NiojCoo.gOOH exhibited the best catalytic performance. Reaction rate ofNio.2Coo.8OOH was 2, 4, and 4.4 times that of CoOOH, CoFe2O4 and CO3O4, respectively. Moreover, Ni。2C00.8OOH/PMS system had potential application to organic pollutants and displayed a great catalytic activity over a broader pH value(e.g., 4-10). More importantly, Ni doping accelerated the transfonnation of Co(Ⅲ) and Co(Ⅱ) and formed active species CoOH^+ and NiOH^+ which were responsible to the enhancement of PMS activation.OH, SO4^-:O2^- and 1^O2 were detected, indicating both non-radical and radical processes in the Nio.2Coo.8OOH/PMS system. These findings provide a promising alternative to mixed-metal oxyhydroxides catalysts for PMS activation, demonstrating a great potential in environmental remediation and wastewater treatment.     

Reductive Amination of Carbonyl Compounds with Ammonia and Hydrogenation of Nitriles to Primary Amines with Heterogeneous Cobalt Catalysts

Reductive amination of aldehydes/ketones with aqueous NH3 and hydrogenation of nitriles to primary amines with Co catalysts were reported. Co@NC-700 exhibited remarkable activity and high selectivity for the reductive amination of aldehydes/ketones with aqueous NH3 and the hydrogenation of nitriles to primary amines. Several primary amines can be obtained with good to excellent yields via the reductive amination of aldehydes/ketones and the hydrogenation of nitriles. The nitrogen-doped carbon(C)-supported Co@NC-700 metal catalyst was prepared via the pyrolysis of bioMOF Co/adenine in activated C. Co@NC-700 can be reused five times without evident loss of activity.     

Self-cleaning Anti-fouling TiO2/Poly(aryl ether sulfone) Composite Ultrafiltration Membranes

A series of novel TiO2/poly(aryl ether sulfone) ultrafiltration membranes with anti-fouling and self-cleaning properties was designed and prepared. First, anti-photocatalytic degraded fluorine contained polv(aryl ether sulfone) matrix(PAES-F) was synthesized. Then the composite membranes were prepared via TiO2 nanopartides and PAES-F polymer matrix by solution blending and non-solvent induced phase inversion methods. Further, separation efficiency, fouling behavior and self-cleaning property of the composite ultrafiltration(UF) membranes were investigated by dead-end filtration experiments using a polyacn lamide solution. The composite UF membranes exhibited outstanding self-cleaning efficiency and anti-photocatalytic degraded property after exposure to simulated sunliglit irradiation.The water flux recovery ratios(FRR)of the optimal composite UF membranes could reach 74.24%, which was attributable to photocatalytic degradation of the organic contaminant by TiO2. And the retention rates of the composite UF membranes could maintain over 97%, which indicated the excellent photocatalytic degradation resistance of the fluorine contained PAES-F matrix. The novel high perfomiance composite UF membranes have a broad application prospect in water treatment.     

多维度信息记录与再现技术的进展

随着信息技术的高速发展和大数据时代的到来,有效存储和管理海量数据的要求对数据存储技术提出了严峻挑战。光存储技术在能耗、容量、成本、寿命、安全等方面的优势,使其正逐渐成为未来数据存储的主流技术。本文围绕光存储技术的维度展开论述,纵向介绍了几种常用的光存储技术。目前以光盘为代表的二维面存储技术,存储容量已接近其理论存储极限（23.5 GB/disc）;以双光子吸收技术、全息存储技术为代表的三维体存储技术,其存储容量相较二维存储技术提升了2~4个数量级;五维存储技术进一步扩展了数据存储的维度。可以预见,未来光存储技术会在大存储容量、超高存取速度、高性能存储材料、多维度存储技术等方面取得突破和进展。     

应用控制理论的叶栅气动反设计

基于控制理论的气动设计方法作为一种基于梯度的优化方法,通过引入伴随系统计算目标函数的敏感性导数,大大降低设计成本.本文将基于控制理论的气动设计方法应用到透平叶栅的气动反问题中,应用Euler方程研究了二维叶栅的压力反设计问题,并讨论了该方法具体实施中的关键问题,包括采用非均匀B样条进行二维叶栅造型;应用Thompson时间相关边界条件理论进行伴随方程特征分析;研究伴随方程的数值求解方法,构造伴随方程的耗散通量.通过算例证明了该气动设计方法适用性好,速度快,可以大大节约计算成本.     

Reactive Ion Etching as Cleaning Method Post Chemical Mechanical Polishing for Phase Change Memory Device

In order to improve nano-scale phase change memory performance, a super-clean interface should be obtained after chemical mechanical polishing （CMP） of Ge2Sb2Te5 phase change films. We use reactive ion etching （RIE） as the cleaning method. The cleaning effect is analysed by scanning electron microscopy and an energy dispersive spectrometer. The results show that particle residue on the surface has been removed. Meanwhile, Ge2Sb2Te5 material stoichiometric content ratios are unchanged. After the top electrode is deposited, currentvoltage characteristics test demonstrates that the set threshold voltage is reduced from 13 V to 2.7V and the threshold current from 0.1 mA to 0.025 mA. Furthermore, we analyse the RIE cleaning principle and compare it with the ultrasonic method.     

A New Dynamics Expansion Mechanism for Plasma during Pulsed Laser Deposition

The dynamics expansion mechanisms for plasma plume generated by pulsed laser radiation are studied in detail, taking account of plasma ionization effect. Based on the consideration of local conservations of mass, momentum, collected as the assumption that plasma can be viewed as compressible ideal fluid and high temperature-high pressure ideal gas, we develop a new dynamics expansion mechanism for plasma produced by pulsed laser radiation. Using the analytical method, the space number density and pressure evolvement of plasma in cylindrical coordinate are obtained, the dynamics evolvement equations are also derived. The results from the present model indicate that the plasma dynamic expansion behaviour can be evidently influenced by the ionization fraction η. Its effect is similar to a new dynamic source for plasma expansion and increases the expansion acceleration in all directions. The predictions of the expansion of the plasma is affected by the temperature, the average atoms mass and the ionization degree of the plasma are consistent with the experimental results.     

Generation of Electric Field and Net Charge in Hall Reconnection

Generation of Hall electric field and net charge associated initial conditions of plasma density and magnetic field. with magnetic reconnection is studied under different With inclusion of the Hall effects, decoupling of the electron and ion motions leads to the formation of a narrow layer with strong electric field and large net charge density along the separatrix. The asymmetry of the plasma density or magnetic field or both across the current sheet will largely increase the magnitude of the electric field and net charge. The results indicate that the asymmetry of the magnetic field is more effective in producing larger electric field and charge density. The electric field and net charge are always much larger in the low density or/and high magnetic field side than those in the high density or/and low magnetic field side. Both the electric field and net charge density are linearly dependent on the ratios of the plasma density or the square of the magnetic field across the current sheet. For the case with both initial asymmetries of the magnetic field and density, rather large Hall electric field and charge density are generated.     

External Electric Field Effect on Hydrogenic Donor Impurity in Zinc-Blende InGaN Quantum Dot

The binding energy of a hydrogenic donor impurity in zinc-blende (ZB) InGaN quantum dot (QD) is calculated in the framework of effective-mass envelope-function theory using the plane wave basis. It is shown that the donor binding energy is highly dependent on the impurity position, QD size and the external electric field. The symmetry of the electron probability distribution is broken and the maximum of the donor binding energy is shifted from the centre of QD in the presence of the external electric field. The degenerating energy levels for symmetrical positions with respect to the centre of QD are split. The splitting increases with the increase of QD height while the splitting increases up to a maximum value and then decreases with the increase of QD radius.