硫的发展与应用

硫是一种非金属元素，属于氧族元素（ⅥA族）。硫的发现和使用具有悠久的历史，现代化学中含硫生命分子、含硫药物、含硫材料、精细化学品等都十分普遍。从硫元素的发展历史出发，逐步介绍硫化学在人类生活中的重要用途。重点介绍当代硫化学在生命功能、药物作用、食品和有机光电材料中的重要用途，尤其是生活中常见的含硫药物、含硫食品和含硫材料的主要成分以及它们独特性质的化学本源。     

α, α'-二胺基二苄基硒醚的合成

本文以苯骈三氮唑、胺和苯甲基醛为原料,发现Mannich反应,生成胺烷基化的苯骈三氮唑衍生物。在此衍生物中,苯骈三氮唑基是亲核取代反应的良好离去基团,易被强亲核试剂的硒负离子取代,生成对称α,α'-二胺基二苄基硒醚。反应易进行,产率较高,产物均为固体,易提纯。这是合成含氮原子的对称硒醚的较好方法。     

微波辅助RGD环肽的固相合成

以2-氯代三苯甲基氯树脂为载体，采用Fmoc/t-Bu/Dmab正交保护策略，在微波辅助下合成了环肽c(fKRGD)，收率22.5%，纯度94.5%，其结构经MS(ESI), MS(MALDI-TOF)和HPLC确证。     

SrTi0.9M0.1O3-δ钙钛矿型氧化物催化剂甲烷氧化偶联反应性能的研究

The structure and catalytic properties of SrTi_0.9M_0.1O_3-δ (M=Mg，Al， Zr) perovskite-type catalysts for ox-idative coupling of methane (OCM) have been studied by using X-ray diffraction (XRD)，X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption of oxygen(O₂-TPD) methods. It has been shown that doping the cations of lower valence (e.g. Mg²⁺， Al³⁺) to the B site of SrTi_0.9M_0.1O_3-δ perovskite-type catalysts results in the higher content of adsorbed oxygen species on the surface of catalysts and thus higher C₂-selectivity for OCM reaction. It is suggested that the oxygen vacancies of SrTi_0.9M_0.1O_3-δ (M=Mg， Al， Zr) perovskite-type catalysts are the sites responsible for oxygen activation， and the adsorbed oxygen species on the surface of SrTi_0.9M_0.1O_3-δ catalysts are the main active species for OCM reaction.     

Electrochemical Impedance Analysis of Thermogalvanic Cells

Thermogalvanic cells(also known as thermo-electrochemical cells) that convert waste heat energy to electricity are a new type of energy conversion device. However, the electron transfer kinetics and mass transfer of redox couples have not been thoroughly studied. Here, the ion reaction and charge transport in thermogalvanic cells are investigated by electrochemical impedance analysis. We first propose the detailed impedance model followed experimental verification on three types of electrode materials. Parameters including kinetic rate constants and ion diffusion coefficients for the electrodes are obtained by fitting the impedance data. Our study shows explicitly that impedance analysis can provide useful information on selecting suitable electrode materials for thermogalvanic cells.     

Synthesis and X-ray crystal structure of oxamido-bridged heterobinuclear Ni(Ⅱ)-Cu(Ⅱ) complexes

The two complexes [Ni(oxen)Cu(L)2](ClO4)2.xH2O (L=2,2'-bipyridyl(bpy), 1,10-phenanthroline(phen)) have been synthesized, where oxen is N,N'-bis(2-aminoethyl)oxamido di-anion. The crystal structure of [Ni(oxen)Cu(bpy)2](ClO4)2.CH3OH has been determined by X-ray diffraction method. The crystal is triclinic system, space group P1 with a=12.179(1),b=12.298(2), c=11.476(2) A, a=97.57(1), B=97.52(1), 7=80.29(2), V=1669.04(67) A3, Z=2, Dcalcd=1.667 g/cm3. The structure has been refined to final R of 0.076 and Rw of 0.080, respectively. The complexes have an extended oxamido-bridged structure and consist of Ni(Ⅱ) ion in a square planar environment and Cu(Ⅱ) ion in a distorted octahedral environment.     

Studies on the Oxazaborolidine-catalyzed Enantioselective Reduction of 3-Morpholin-4-yl-1-phenyl-1-propanone with Density Functional Theory

Density functional theory (DFT) has been applied to study the enantioselective reduction of 3-morpholin-4-yl-l-phenyl-l-propanone with borane catalyzed by (S)-4-benzyl-5,5-diphenyl-l,3,2-oxazaborolidine at the B3LYP/6-31G* level. All molecular species involved in the four reaction steps have been fully optimized and the structural parameters are provided, and the micro process of reaction was also investigated. The catalyst-alkoxyborane adduct formed in step Ⅲ exhibits a B-O-B-N tetra-atomic ring. Reaction coordination calculations show that BH3 can react with 3-morpholin-4-yl-l-phenyl-l-propanone spontaneously, resulting in the need of 2 tool BH3 in the reaction.     

剪切力模式近场扫描光学显微镜的恒幅反馈控制方法研究

剪切力模式近场扫描光学显微镜(Near-field Scanning Optical Microscopy,NSOM) 的音叉探针间距控制系统中,用相位反馈控制和检测剪切力,同时采用比例＋积分（PI）技术实现对音叉探针振幅的反馈控制,使探针振幅在扫描过程中保持为恒定值.用相位信号作为探针与样品间距控制信号,分别在无振幅反馈和有振幅反馈两种情况下,以不同速率扫描得到标准CD_RW光盘光栅的两组图像,并进行了比较分析.实验表明,恒振幅反馈电路的引入有助于提高探针系统的响应速度和灵敏度,改善所得图像的质量及分辨率.     

高压下制备的累托石/酚醛树脂复合材料微结构和热性能研究

 采用物理方法在高压下制备了酚醛树脂（PF）/累托石（REC）纳米复合材料,用X射线衍射（XRD）、透射电子显微镜（TEM）及热分析（DSC/TGA）等方法,研究了复合材料的物相、显微结构以及热学性能。结果表明,不通过层间高分子聚合反应,不预先对累托石进行有机化处理,在高压下,由聚合物分子插入粘土层间,可以形成剥离型树脂/粘土纳米复合材料,并且其热学性能发生了较大的改变。