Structural behaviour of fibre metal laminates subjected to a low velocity impact

Structural impact tests were first presented to cover typical fibre metal laminates (FMLs) subjected a low velocity projectile impact,which produced the corresponding load-displacement traces and deformation/failure modes for the validation of numerical models.Finite element (FE) models were then developed to simulate the impact behaviour of FMLs tested.The aluminium (alloy grade 2024-0) layer was modelled as an isotropic elasto-plastic material up to the on-set of post failure stage,followed by shear failu...     

基于二极管阵列检测器的色谱峰纯度的快速直观鉴定

基于二极管阵列检测器（DAD）得到的色谱-光谱图,通过去噪、归一化、计算欧氏距离,聚类分析等方法,建立了一种快速直观的评价色谱峰纯度的有效方法：可直观的判断色谱峰的纯度,并判断存在干扰峰的位置,为色谱工作者评价色谱峰,进行下一步工作提供了依据。     

Lamb wave topological imaging for blind hole defects in isotropic plates

The research aims at validating the ability of topological imaging to blind holes in isotropic plates using Lamb waves. Due to the defect is not symmetric around the midplane of the plate, the effect of Lamb mode conversion will have to be taken into account.The imaging method is based on two computations of ultrasonic fields, one forward and one adjoint, performed for the defect-free reference medium. The excited signal and scattered Lamb waves caused by the blind hole, are used as emitting sources to compute the forward problem and the adjoint problem, respectively. With the help of the finite element simulations,the natural refocusing process of the multimode Lamb waves at the defect location is visually demonstrated by the transient acoustic field snapshots at the different moments to strengthen the physical mechanism of the topological imaging method. The numerical results demonstrate that topological imaging has relatively stronger applicability to the blind hole in contrast to classical Delay And Sum(DAS) method and Time Reversal(TR) method. The topological imaging could handle complex Lamb wave signals containing mode conversions without the imaging quality being affected. The proposed imaging method presents a certain developing potential for detecting and imaging asymmetric defects in plate-like configurations using Lamb waves.     

Ag纳米颗粒对有机小分子太阳能电池性能的改善

在有机小分子太阳能电池CuPc/C60和TiOPc/C60的阳极ITO表面分别制备了一层Ag纳米颗粒,并采用MoO3作为阳极缓冲层,器件的性能均得到有效改善.Ag纳米颗粒的引入所形成的表面等离子激元共振可显著提高有机光活性层的吸收效率和光生激子的分解效率;而MoO3有效抑制了光生激子在有机/金属界面处发生的猝灭,提高了...     

发光温敏漆的制备及其温度猝灭特性研究

以三氯化钌、2—2联吡啶为主要原料,甲基丙烯酸甲酯为基质,制备了钌联吡啶／聚甲基丙烯酸甲酯发光温敏漆,并对其温度猝灭特性进行了研究。扫描电镜观察发现钌联吡啶为规则的层状六边形结构;差热-热重测试表明钌联吡啶在320℃发生分解。紫外吸收光谱分析发现,温敏漆的适合激发光波长区间为410～500nm。荧光光谱测试结果表明温敏...     

国外物理学核心期刊的研究及其意义

详细介绍了综合测定国外物理学核心期刊的研究方法,扼要阐述了它对物理学文献资源建设及学术交流的作用,并对所测定出的国外物理学核心期刊结论做了比较客观的评价.     

流动注射化学发光法测定山奈酚

采用流动注射技术,研究了高锰酸钾-山奈酚-过氧化氢体系的化学发光行为,对影响化学发光强度的因素进行了试验,建立了流动注射化学发光法测定山奈酚的新方法.方法检出限为1×10-10g·mL-1,线性范围为1.0×10-7-1.0×10-4g·mL-1.对1.0×10-6g·mL-1的山奈酚平行测定11次,其RSD为2.1%...     

宽视场长焦距离轴三反射镜光学系统的设计

分析了离轴三反射镜系统成像特性．根据共轴三反射镜光学系统像差理论，确定结构参数的基本计算公式．设计了长焦宽视场的离轴三反射镜光学系统，分析了系统结构参量对像差的影响．结果表明，该系统视角较大，地面复益范围较宽，成像质量接近衍射极限．     

机器学习在紫外法测定硝酸盐氮浓度中的应用

紫外分光光度法(UV法)由于较传统化学方法具有效率高操作简便、无二次污染且可现场原位测试等优点,近些年来被广泛应用到水质参数的测试中。硝酸盐氮是工业废水中的主要污染物之一。基于UV法测量水体中硝酸盐氮浓度的标准方法是分别测量水样在220nm和275nm处的吸光度,然后用275 nm处的吸光度对220 nm处的吸光度进行校正,进而绘制出校正后的吸光度与硝酸盐氮浓度的标准曲线。然而,当硝酸盐氮浓度升高时,标准法所采用的朗伯比尔定律的线性关系以及不同物质吸光度叠加的线性不能很好地满足,在实际的实验测试中也发现,很难建立硝酸盐氮在220 nm处的吸收模型。为了克服单波长或双波长方法的缺陷,将硝酸盐氮吸收峰范围的各个波长的吸光特性引入到模型的建立之中。同时,为了降低模型的复杂度,在建立模型之前先对吸光度数据进行主成分分析,将输入数据的维度数从107压缩到4,然后对压缩后的数据使用局部加权线性回归法建模,该吸收模型对于训练样本和测试样本都有较好的预测结果,且能够适应高浓度时吸光度与浓度的非线性关系,测量上限可达几百mg·L-1。另外,此方法的原理和流程也适用于其他水质参数吸收模型的建立。