Stress State of Multilayer Thin-Walled Elements with Interfacial Defects of Structure

Based on the discrete-structural theory of thin plates and shells, a calculation model for thin-walled elements consisting of a number of rigid anisotropic layers is put forward. It is assumed that the transverse shear and compression stresses are equal on the interfaces. Elastic slippage is allowed over the interfaces between adjacent layers. The solution to the problem is obtained in a geometrically nonlinear statement with account of the influence of transverse shear and compression strains. The stress-strain state of circular two-layer transversely isotropic plates, both without defects and with a local area of adhesion failure at their center, is investigated numerically and experimentally. It is found that the kinematic and static contact conditions on the interfaces of layered thin-walled structural members greatly affect the magnitude of stresses and strains. With the use of three variants of calculation models, in the cases of perfect and weakened contact conditions between layers, the calculation results for circular plates are compared. It is revealed that the variant suggested in this paper adequately reflects the behavior of layered thin-walled structural elements under large deformations. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 761–772, November–December, 2005.     

On the Convenience to Form Coalitions or Partnerships in Simple Games

A partnership in a cooperative game is a coalition that possesses an internal structure and, simultaneously, behaves as an individual member. Forming partnerships leads to a modification of the original game which differs from the quotient game that arises when one or more coalitions are actually formed. In this paper, the Shapley value is used to discuss the convenience to form either coalitions or partnerships. To this end, the difference between the additive Shapley value of the partnership in the partnership game and the Shapley alliance value of the coalition, and also between the corresponding value of the internal and external players, are analysed. Simple games are especially considered. Research partially supported by Grant BFM 2003-01314 of the Science and Technology Spanish Ministry and the European Regional Development Fund.     

Electron-Optical System of a High-Power Gyrotron with Nonadiabatic Electron Gun

We describe a nonadiabatic electron gun operated in the mode of a currentconfined by spatial charge and intended for producing helical electron beams for high-power gyroresonantdevices.Results of numerical simulation of electron trajectories and electron-beam parameters arepresented. It is shown that for a high operating current, the pitch factor and the electronvelocity spread can be significantly better than in the conventional adiabatic systems. __________ Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Radiofizika, Vol. 48,No. 6, pp. 517–522, June 2005     

Dynamics of acoustoelectromagnetic solitons as a manifestation of higher nonlinearity

The acoustoelectromagnetic interaction is examined in a regime where three mechanisms must be taken into account simultaneously: photoelasticity, quadratic photoelasticity, and elastic nonlinearity. It is shown that beyond the critical conditions, acoustic solitary waves are formed at harmonic and subharmonic frequencies in a crystal. Including damping and nonideal reflection at the boundaries does not lead to the establishment of any sort of stationary state: a soliton spatial-temporal dynamic develops. Fiz. Tverd. Tela (St. Petersburg) 39, 1101–1104 (June 1997)     

Propagation of magnetostatic waves in unsaturated ferrite films with a strip domain structure

The propagation of surface and volume magnetostatic waves in unsaturated films of yttrium iron garnet is studied experimentally for the case when the wavelength greatly exceeds the domain width, while the domain width is comparable to the film thickness. The characteristics of these waves are examined for symmetric linear, asymmetric linear, and symmetric zigzag strip domain structures in the films. These characteristics cannot be explained by a theory based on averaging the magnetization over all the domains. Zh. éksp. Teor. Fiz. 111, 1016–1031 (March 1997)     

Optical corrosion meter

In a previous study, a mathematical model relating surface and bulk behaviours of metals in aqueous solution has been developed. The model was established based on principles of holographic interferometry for measuring microsurface dissolution, i.e. mass loss, and on those of electrochemistry for measuring the bulk electronic current, i.e. corrosion current. In the present work, an optical corrosion meter was built based on the above model. The corrosion meter consists of an electrochemical cell in which the sample is immersed in aqueous solution. Furthermore, the corrosion meter has a holographic camera with a thermoplastic film for in situ processing of holograms in order to obtain real-time holographic interferoms of the sample in the electrochemical cell. Results of the present work indicate that optical holography is a very useful technique for measuring the corrosion current density of different alloys in aqueous solutions. As a result, the corrosion current density of aluminium, stainless steel, and low-carbon steel in 1 M KCl, 1 M NaCl, and 1 M NaOH solutions were obtained. A comparison between the corrosion data of samples showed that the corrosion current density of the stainless steel in 1 M NaCl is nearly three-folds higher than that of the aluminium in 1 M KCl and the low-carbon steel in 1 M NaOH.