Forward-angle yields of 2≤Z≤11 isotopes in the reaction of 18O(35A MeV) with 9Be

A systematic investigation of the forward-angle inclusive yields of 2≤Z≤11 isotopes produced in collisions of ¹⁸O projectile nuclei with a ⁹Be target in the Fermi energy region (35A MeV) is performed. The measurements were based on the use of the COMBAS double achromatic kinematical separator in the spectrometry mode at the Flerov Laboratory of Nuclear Reactions at the Joint Institute for Nuclear Research, FLNR (JINR, Dubna). The velocity, isotopic, and element distributions are presented. There is no unique mechanism that would explain the total set of results obtained in this experiment. A dominant role of low-energy reaction mechanisms is observed. The intensity of secondary beams of halolike nuclei ¹¹Li, ¹²Be, and ¹⁴Be is determined.     

Exciton energy broadening due to interface fluctuations in ZnSe/ZnSxSe1−x strained quantum wells

The excitonic properties of a ZnSe/ZnS_xSe_1−x strained quantum well (QW) are calculated taking into account interface effects. Numerical results obtained with ZnS_0.18Se_0.82/ZnSe QWs show that graded interfaces can be responsible for a strong broadening of excitonic spectra.     

Color Gauge Invariance in Hard Processes

Within the theoretical framework which we apply, a suggested origin for single-spin asymmetries is the presence of gauge links in transverse momentum-dependent distribution functions. Recently we found new gauge-link structures in a number of hard processes. These structures need to be considered in the evolution of parton distribution functions and for establishing factorization.     

Rietveld refinement of CdSe phases annealed under argon atmosphere

Hexagonal and cubic cadmium selenide were prepared from a chemical route by using cadmium chloride and potassium selenium hydride obtained from reaction of selenium powder and potassium boron hydride. The product obtained was thermally treated under argon flux at 300, 500 and 600 °C for 2 h and characterized by X-ray photoelectron spectroscopy and X-ray diffraction. The X-ray diffraction data were refined by Rietveld method and the structural parameters were determined for the phases of each annealed samples. At 300 °C five phases were identified: Cubic and hexagonal cadmium selenides and the contaminants: Potassium chloride, boron oxide and cadmium boron oxide. At 500 and 600 °C only the hexagonal cadmium selenide phase was identified besides the other above mentioned contaminant.     

Quantitative Bestimmungen mittels cyclischer Voltammetrie an der Phasengrenze zweier mischbarer Elektrolytl?sungen

Summary This paper presents some applications of cyclic voltammetry at the interface of two immiscible electrolyte solutions by means of an experimental set-up described in a former publication. When using special sample preparation good results are obtained for the determination of iodide and quinine in pharmaceutical products as well as for the determination of quinine in tonic water and dodecylsulfate in a tooth-salt.

---

---

Herrn Prof. Dr. Günther Tölg zum 60. Geburtstag gewidmet     

On the onset of separation in turbulent boundary layer flow over two-dimensional humps of various size

Summary The available laboratory data of turbulent boundary layer flow over two-dimensional obstacles have been examined in order to identify the parameters (such as the aspect ratio or the surface roughness) driving the onset of separation. A comparison with some linearized models suitable for atmospheric applications is also made. It results that i) the model response can be highly sensitive to the detailed shape of the obstacle; ii) the ratio between obstacle length and boundary layer thickness is relevant in determining the pressure perturbation near the surface; iii) the surface shear stress is poorly described in most cases and in particular in the obstacle wake.

---

Riassunto I dati di laboratorio disponibili, relativi a strati limite turbolenti su ostacoli bidimensionali, sono stati esaminati al fine di identificare i parametri guida della separazione (quali la pendenza o la rugosità della superficie). Inoltre è stato fatto un confronto con i risultati di alcuni modelli linearizzati adatti per applicazioni atmosferiche. Ne risulta che i) la risposta del modello è molto sensibile alla forma dettagliata dell’ostacolo; ii) il rapporto fra la lunghezza dell’ostacolo e lo spessore dello strato limite turbolento incidente è importante nel determinare la perturbazione della pressione vicino alla superficie; iii) lo ?shear stress? superficiale non è riprodotto con accuratezza nella maggioranza dei casi, in particolare nella scia dell’ostacolo.

---

Резюме Анализируются имеющиеся лабораторные данные по турбулентному течению в пограничном слое над двумерными препятствиями, чтобы идентифицировать параметры (такие как аспектное отношение или шероховатость поверхности), определяющие возникновение отрыва. Проводится сравнение с некоторыми линеаризованными моделями, удобными для атмосферных приложений. Получены следующие результаты: 1) модельный отклик может быть очень чувствительным к детальной форме препятствия; 2) отношение между длиной препятствия и толщиной поверхностного слоя является существенным при определении возмущения давления вблизи поверхности; 3) напряжение поверхностного сдвига плохо описывается в большинстве случаев и, в частности, в спутной струе.

     

Assay of vecuronium in plasma using solid-phase extraction, high-performance liquid chromatography and post-column ion-pair extraction with fluorimetric detection

An assay has been developed and validated for the routine monitoring of vecuronium in plasma. It consists of solid-phase extraction using C18 disposables as sample pre-treatment, high-performance liquid chromatography and post-column ion-pair extraction with fluorimetric detection. The fluorescent anion 9,10-dimethoxyanthracene-2-sulphonate (DAS) is used as the counter ion. The detection limit is ca. 5 ng/ml in plasma with a signal-to-noise ratio of 10. The assay is also applicable for monitoring vecuronium and its potential metabolites in other biological media, e.g., urine, bile and tissue (liver, kidney) homogenates.     

Bulk and microprobe analysis for trace elements with synchrotron radiation

Blood serum samples were irradiated by monochromatic synchrotron radiation (15 keV) and by 2.4-MeV protons to compare their performance for the detection of trace elements by x-ray fluorescence (XRF) spectrometry. Absolute concentration assignment was based on the addition of an internal standard and on a method which uses the incoherent and coherent radiation as a flux monitor of the incoming beam. Preliminary experiments with a synchrotron XRF microprobe are reported.