Pmr spectra and stereochemistry of chiral 2-aryl- and 2-hetaryloxazolidines-1,3

PMR spectra of 2-aryl- and 2-hetaryloxazolidines-1,3 are studied. A PMR criterion is revealed according to which the absolute configuration of the C₍₂₎ atom of the oxazolidine ring can be assigned.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 678–680, May, 1992.     

Immunochemical detection of aminoglycosides in milk and kidney

In 1996, the European Union established provisional maximum residue limits (MRL) for gentamicin, neomycin, streptomycin and dihydrostreptomycin in milk and tissue (0.1-5 mg kg-1). For the detection of these four aminoglycosides, three enzyme linked immunosorbent assays (ELISA) for applications in milk and kidney were developed. The screening of defatted and diluted milk resulted in limits of determination (LDM) of < 0.01 mg l-1. Kidney samples were deproteinized with a trichloroacetic acid solution (3%) and after filtration and the addition of buffer, aliquots were used in the ELISA. The LDM of the four aminoglycosides in kidney were < 0.05 mg kg-1. The ELISA were found suitable for the semi-quantitative screening of milk and kidney for the presence of the four aminoglycosides far below the MRL levels. In randomly taken milk samples (n = 776) and in kidneys derived from healthy pigs (n = 124), the aminoglycoside residues found were far below their established MRL. In eight out of the 94 kidney samples obtained from diseased animals after emergency slaughter, aminoglycoside residues were above the MRL.     

Collisional depolarization of NO2 fluorescence as studied by Hanle effect measurements

We report on collisional depolarization of NO₂ fluorescence with use of Hanle effect (zero magnetic field level crossing) experiments. Single fine structure levels of NO₂ in several regions of the visible absorption spectrum predominantly near 593 nm and 514 nm are prepared by selective optical excitation and the depolarization of the fluorescence light versus a magnetic field is investigated. We find that the Hanle signal is in general a superposition of two Lorentzian shaped signals, each with a characteristic dependence on light intensity and NO₂ pressure. For NO₂ pressures >1 µ bar the collisional depolarization follows simple Stern-Volmer kinetics. However, an unusual pressure dependence is observed at NO₂ pressures <1 µ bar. In the same pressure range (<1 µ bar) we see also an unexpected resonance with significantly different properties as the Hanle signal.     

Kinetic isotope effect in proton exchange processes between methanol and water in inert solvents

The kinetic isotope effect in proton exchange between methanol and water in CCl₄ solution was studied by¹H and²H NMR and kinetic IR spectroscopy. The exchange rate increases in the series CD₃OH+H₂O3OD+H₂O3OD+D₂O. It has been concluded that the limiting step of the reaction involves the formation of an H-bonded cyclic intermediate.

---

¹H ²H - CCl₄. , CD₃OH+H₂O3OD+H₂O3OD+D₂O. , - -.

     

alpha and piDL helical states of alternating poly(gamma-benzyl D-L-glutamate) in solution.

As in solid state, strictly alternating poly(gamma-benzyl D-L-glutamate) in solution can adopt two different helical conformations. Besides the alpha helix, a second helical conformation is found at higher temperatures in dioxane and chloroform, the properties of which correspond to that of the piDL4 helix. As the molecules have a finite length a screw sense is favored for both helical forms thus giving rise to optical activity allowing the study of the transconformation by optical rotatory dispersion and circular dichroism besides infrared and dielectric measurements. Thus, as the temperature is raised the equilibria right-left handed alpha helices and alpha-piDL helical forms can be followed. The favored screw senses are determined by the number of interacting side chains for the alpha helix and by the number of hydrogen bonds which are formed in the piDL helical conformation. The side chain-side chain interactions in the alpha helix are experimentally shown to be attractive.     

Investigation of the ceriumIV oxidation of poly(vinyl alcohol)

Initiation of ceric ion-induced grafting from poly(vinyl alcohol) (PVOH) was studied by examining the formation and lifetime of colored complexes between cerium^IV and (1) a commercial PVOH, (2) a diol-free PVOH, and (3) several model 1,2-diols. UV/visible spectroscopy was employed using a wavelength of 520 nm. Results showed that the 1,2-diols, which are an inherent defect in PVOH, are the sites most reactive toward ceric ion. The observed rate constant for the reaction was found to increase with decreasing [Ce^IV] until the maximum rate was reached at which time reaction took place exclusively with 1,2-diols. The activation energy for oxidation of commercial PVOH at the maximum rate was 15.4 kcal/mol while that for diol-free PVOH was 22.4 kcal/mol. The 1,2-diols of PVOH displayed a high equilibrium constant for complexation with ceric ion, compared to the model 2,3-butanediol. It was suggested that the PVOH chain segments bring about crowding of the diol group, and this leads to a higher equilibrium constant for complexation. The lowest energy conformation of a PVOH chain segment containing a 1,2-diol linkage was calculated using the CHEMLAB-II molecular design program, and the 1,2-diol was predicted to be at the center of a sharp bend in the chain brought about by its presence.     

Micro analytical determination of carbon and hydrogen

Summary Lead dioxide used for the absorption of oxides of nitrogen in a carbon and hydrogen combustion train can be very variable in quality: a practical service test for measuring the efficiency and relative capacity of batches of lead dioxide for nitrogen dioxide (under conditions similar to those present in a combustion on aPregl- type apparatus) has shown that some batches have a short life because of a correspondingly low relative capacity, whereas other batches may have a high relative capacity and give erratic values for carbon in tests on a standard substance. Investigation has shown that the relative capacity is dependent on primary particle size of the lead dioxide powder, and that material of suitable quality (with medium capacity) can be made by recommended methods.

---

Zusammenfassung Das zur Absorption von Stickstoffoxyden bei der C-H-Bestimmung verwendete Bleidioxyd ist oft von sehr verschiedener Qualität. Ein geeignetes Verfahren zur Prüfung der Wirksamkeit und der relativen Aufnahmsfähigkeit von Bleidioxydproben gegenüber Stickstoffdioxyd (unter Bedingungen, wie sie in der Preglschen Verbrennungsapparatur vorherrschen) zeigte, daß manche dieser Proben infolge geringer Aufnahmsfähigkeit eine kurze Lebensdauer besitzen, während andere wiederum trotz großer relativer Aufnahmsfähigkeit falsche Kohlenstoffwerte bei der Analyse einer Standard-substanz geben. Die beschriebenen Untersuchungen zeigen, daß die relative Aufnahmsfähigkeit von der Größe der Primärteilchen des Bleidioxydpulvers abhängig ist und daß Bleidioxyd geeigneter Qualität (mit mittlerer Aufnahmsfähigkeit) mit Hilfe der vorgeschlagenen Methoden hergestellt werden kann.

---

Résumé Le bioxyde de plomb utilisé pour l'absorption des oxydes de l'azote dans une grille à combustion pour carbone et hydrogène peut être de qualité très variable. Un essai en service pratique pour évaluer l'efficacité et la teneur relative de lots de bioxyde de plomb (dans des conditions similaires à celles qui se présentent dans une combustion en appareil du typePregl) a montré que quelques lots ont une durée brève à cause d'une teneur relativement basse, tandis que d'autres lots peuvent présenter une teneur relativement élevée et donner des valeurs inconstantes pour le carbone dans les essais faits sur une substance étalon. Les recherches ont montré que la teneur relative dépend d'abord de la grosseur des particules de la poudre de bioxyde et que cette matière de qualité convenable (avec une teneur moyenne) peut être fabriquée par des méthodes recommandées.

     

Etudes sur les fibres naturelles et de synthèse

Résumé Nous avons mesuré, en fonction de la température, le degré de gonflement dans l'eau de fibres de collagène amorphes qui ont été tannées différemment, ceci dans le but de pouvoir déterminer, pour chaque degré de tannage (pontage chimique) la chaleur de mélange du collagène amorphe sec avec l'eau de gonflement. En utilisant la théorie relative au gonflement des réseaux polymériques amorphes dans un excès de diluant, on a pu montrer que le paramètre thermodynamiqueχ ₁ caractéristique du système collagène-eau (paramètre deFlory-Huggins) varie avec la composition du réseau gonflé. Par contre, le paramètre ?enthalpique? correspondantϰ ₁=− =−0,34 est indépendant de cette composition. La chaleur de mélangeΔH _mél/V ₀ d'un cm³ de collagène amorphe sec avec l'eau de gonflement peut être calculée pour les différents degrées de tannage. Elle a le signe deϰ ₁, i. e. elle est négative et est donnée par:ΔH _mél/V ₀=RT gK₁(1−v₂ ^éq). Sa valeur absolue est donc d'autant moins importante que le degré de tannage des fibres est poussé; v₂ ^éq augmente en effet avec la concentration en liens intermoléculaires introduits dans les échantillons. La variation d'enthalpie accompagnant la transformation d'une fibre de collagène cristalline sèche en fibre amorphe gonflée (enthalpie de rétraction dans l'eau) diminuée de la chaleur de mélange correspondant au gonflement de la fibre amorphe sèche dans l'eau donne la chaleur de fusion du collagène sec. Cette quantité est égale à:ΔH/V ₀=28±1,5 cal./cm³ et est indépendante du degré de tannage comme on doit s'y attendre.

---

Summary We have measured the temperature dependence of the swelling of amorphous collagen fibres of different degrees of tanning in an excess of water. This was done for the purpose of determining the heat of mixing of amorphous dry collagen with the equilibrium swelling water for each degree of tanning (chemical crosslinking). Using the theory of swelling of polymeric networks in an excess of diluent we were able to show that the parameterχ ₁ of the system collagen-water (Flory-Huggins parameter) is a function of the composition of the swollen network. On the other hand, the energy parameterϰ ₁=− =−0,34 is found to be concentration independent. The heat of mixingΔH _mél/V ₀ of 1 cm³ of dry amorphous collagen with the equilibrium swelling water can be calculated for the different degrees of tanning. It has the same sign asϰ ₁, i. e. is negative, and is given byΔH _mél/V ₀=RTϰ ₁ (1−v₂ ^éq). Its absolute value decreases therefore with increasing degrees of tanning, sincev ₂ ^éq increases with the density of the cross-links in the sample. The change in heat content on transforming 1 cm³ of dry crystalline collagen fibre into amorphous swollen fibre (heat of shrinking in water), decreased by the heat of swelling of the dry amorphous fibre in water, gives the heat of fusion of dry collagen. This latter equalsΔH/V ₀=28±1.5 cal/cm³ and is, as expected, independent of the degree of tanning.

---

Zusammenfassung Um die Mischungsw?rme des amorphen trockenen Kollagens mit dem Quellungswasser zu bestimmen, wurde die Temperaturabh?ngigkeit des Quellungsgrades von verschieden stark gegerbten amorphen Kollagenfasern gemessen. Auf Grund der Theorie der Quellung von amorphen polymeren Netzwerken in einem überschu? von Quellungsmittel konnte gezeigt werden, da? der thermodynamische (Flory- Huggins) Parameterχ ₁ für das System Kollagen-Wasser vom Quellungsgrad des Netzwerkes abh?ngt. Hingegen ist der Enthalpieparameterϰ ₁=− =−0,34 davon unabh?ngig. Die Mischungsw?rmeΔH _mél/V₀ eines cm³ trockenen amorphen Kollagens mit dem Quellungswasser kann für verschiedene Gerbungsgrade (Vernetzungsgrade) berechnet werden. Sie hat das gleiche Vorzeichen wieϰ ₁ d. h. ist negativ, und gehorcht der Gleichung:ΔH _mél/V ₀=RTϰ ₁ (1−v₂ ^éq). Der Betrag der Mischungsw?rme ist um so kleiner, je h?her der Gerbungsgrad der Faser ist; in der Tat w?chstv ₂ ^éq mit der Konzentration der Vernetzungspunkte an. Wenn von der Enthalpie?nderung, welche mit dem übergang von einer trockenen kristallinen Faser zu einer gequollenen amorphen verbunden ist, (Schrumfungsenthalpie im Wasser), die oben definierte QuellungsenthalpieΔH _mél/V ₀ abgezogen wird, so bleibt die Schmelzw?rme des trockenen Kollagens übrig. Diese Schmelzw?rme betr?gt:ΔH/V ₀=28±1,5 cal./cm³ und ist, wie zu erwarten, vom Vernetzungsgrad (Gerbungsgrad) des Fadens unabh?ngig.

---

---

Travail effectué au Laboratoire de Chimie-Physique de l'Université de Liège, Liège (Belgique).     

Reaction of 5-allyl-2,5-dichloro-4,4-dimethoxy-3-morpholinocyclopent-2-enone with Me3SiI

5-Allyl-2,5-dichloro-4,4-dimethoxy-3-morpholinocyclopent-2-enone reacts with Me₃SiI in MeCN to give the corresponding product of reductive vinylic monodechlorination. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1660–1661, August, 1998.     

Styrene emulsion polymerization: Particle-size distributions

Data are presented on the time evolution of particle-size distributions (PSDs) in seeded and ab initio styrene emulsion polymerization systems. Initiation was by chemical reagent (potassium persulfate) or γ-radiation. The unswollen PSDs at various times during interval II of the polymerization were obtained by direct measurement of calibrated electron micrographs. Experimental results were fitted with the equations that describe the time evolution of an initial PSD. Analytic solutions to these equations that allow for entry, exit, and propagation of free radicals were obtained. The values of the rate coefficients for these processes used to fit the experimental data were in excellent agreement with those obtained from dilatometric kinetics experiments.