Semiconductor waveguide directional couplers for coherent receivers

Optical waveguide 3-dB couplers integrated on semicondutors have been studied, designed and fabricated, using both bulk and diluted multi-quantum-well InGaAsP/InP-based materials, grown by MOCVD. The device structure is based on the two-mode interference (TMI) principle and is fully compatible for integration with the optoelectronic and electronic components of a coherent receiver. Bulk material couplers provide an output balanced within 0.05 dB per nanometer and an excess loss of 1.4 dB, compared to a straight guide, while coupling loss to a tapered-lensed single mode fibre is 4 dB.Improved coupling efficiency to single-mode fibres is achieved by use of moderately diluted multi-quantum-well waveguides, which include InGaAsP wells and InP barriers: coupling loss to a tapered-lensed single-mode fibre as low as 0.5 dB and excess loss of 1.8 dB are featured. Couplers fabricated with this waveguide structure have a balance sensitivity of 0.03 to 0.04 dB per nanometer.A moderately diluted multi-quantum-well 3-dB coupler has been permanently pigtailed and butt-coupled to a dual balanced PIN photoreceiver. This hybrid assembly was tested in a coherent transmission system at 155 and 622 Mbits^-1 showing sensitivities, for 10^-9 BER, of about-38.0 dBm and-28.8 dBm, respectively.     

The influence of synthetic conditions on the stability of methotrexate-monoclonal antibody conjugates determined by reversed phase high performance liquid chromatography.

Methotrexate (MTX) has been convalently attached to an IgG-type monoclonal antibody (791T/36) directed to tumour-associated antigen gp72. Conjugates were synthesized by the active ester method using MTX N-succinimidyl ester at various pH values (7.5-10.5). Following purification by gel filtration, high performance liquid chromatography was used to assess the free drug or its derivatives in samples of MTX-791T/36 conjugates previously treated (or not) with hydroxylamine. Quantitative analysis, performed on a reversed phase column (pore size 300 A) with isocratic acetonitrile-sodium acetate buffer (pH 4.8) as mobile phase, indicated no detectable amount of free methotrexate in hydroxylamine-treated conjugates even six months after their preparation. Similar observations were made with conjugates, whose synthesis were performed at pH greater than or equal to 10. In contrast, the presence of increasing amounts of drug/metabolite could be demonstrated in samples produced at lower pH values. Based on these findings, the pH-dependent kinetics of MTX release has been determined and used to design conditions under which stable MTX-791T/36 conjugates could be prepared without hydroxylamine reaction.     

Identification of metabolites of halofantrine, a new candidate anti-malarial drug, by gas chromatography-mass spectrometry.

Two previously unknown metabolites of halofantrine, a candidate anti-malarial drug, have been isolated by thin-layer chromatography from the plasma of dogs administered a single oral dose of 60 mg/kg. Their identifies were investigated after trimethylsilylation by gas chromatography-mass spectrometry under electron-impact and negative-ion chemical ionization conditions. The structural assignment was further confirmed by using a combination of elemental composition analysis of all the isotope peaks at low mass resolution and isotope pattern matching. These two metabolites were formed by modification of the dibutylaminopropyl side-chain of the parent compound involving deamination and oxidation or reduction.     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS——Ⅱ. POLY(p-PHENYLENE 2,6-NAPHTHALATE)

Confined thin film melt polymerization (CTFMP) of naphthalene chloride/hydroquinone (NCMQ, 1/1, molar)mixtures at polymerization temperatures (T_p) below ca. 300℃ resulted in relatively thick, elongated crystals. Polymerizationof NC/HQ above 300℃ between glass yielded well-formed lamellar crystals ca. 100 A thick. Phase Ⅰ and Ⅱ [001] EDpatterns were obtained for all T_p, the relative amount of phase Ⅰ increasing with T_p. Polymerization of naphthalenedicarboxylic acid/hydroquinione diacetate 1/1 mixtures at high T_p also yielded lamellar crystals that "curled up" off of thesubstrate. When the high temperature CTFMP polymerization was conducted between mica, aggregates of lamellae on-edgedeveloped but epitaxial growth did not occur. Epitaxial growth of lamellae between mica could be obtained, however, byconfined thin film solution polymerization, with both of the latter samples yielding apparently related ED patterns from adifferent unit cell than phase Ⅰ or Ⅱ. Fiber patterns, obtained from sheared samples, indicated considerably greater crystaldisorder than in the nascent crystals. Refinement of the phase Ⅰ unit cell parameters, based on the [001] and [01 1] EDpatterns, with modeling based on Cerius~2, suggests a monoclinic phase Ⅰ unit cell with a = 7.76, b = 5.71, c = 14.99 A, α = γ= 90°, β= 99.7°, ρ = 1.47 g/cm~3, space group P12_1/al.     

Tuning inventory policy parameters in a small chemical company

A project to improve inventory management in a small UK chemical company is described. A research group comprising university academics and company managers for logistics and information technology examined current practices and analysed a database of historical records of business operations of the company. Based on the analysis, a scheme to categorise stock and set ordering policies to optimise inventory costs was developed. Some comments are made on process issues and the learning that took place.     

Flame Temperature Effect on the Structure of SiC Nanoparticles Grown by Laser Pyrolysis

Small SiC nanoparticles (10 nm diameter) have been grown in a flow reactor by CO₂ laser pyrolysis from a C₂H₂ and SiH₄ mixture. The laser radiation is strongly absorbed by SiH₄ vibration. The energy is transferred to the reactive medium and leads to the dissociation of molecules and the subsequent growth of the nanoparticles. The reaction happens with a flame. The purpose of the experiments reported in this paper is to limit the size of the growing particles to the nanometric scale for which specific properties are expected to appear. Therefore the effects of experimental parameters on the structure and chemical composition of nanoparticles have been investigated. For a given reactive mixture and gas velocity, the flame temperature is governed by the laser power. In this study, the temperature was varied from 875°C to 1100°C. The chemical analysis of the products indicate that their composition is a function of the temperature. For the same C/Si atomic ratio in the gaseous phase, the C/Si ratio in the powder increases from 0.7 at 875°C up to 1.02 at 1100°C, indicating a growth mechanism limited by C₂H₂ dissociation. As expected, X-ray diffraction has shown an improved crystallisation with increasing temperature. Transmission electron microscopy observations have revealed the formation of 10 nm grains for all values of laser power (or flame temperature). These grains appear amorphous at low temperature, whereas they contain an increasing number of nanocrystals (2 nm diameter) when the temperature increases. These results pave the way to a better control of the structure and chemical composition of laser synthesised SiC nanoparticles in the 10 nm range.     

Harze und Harzs?uren

Ohne Zusammenfassung