Equilibrium Formation of Stable All‐Silicon Versions of 1,3‐Cyclobutanediyl

Main group analogues of cyclobutane‐1,3‐diyls are fascinating due to their unique reactivity and electronic properties. So far only heteronuclear examples have been isolated. Here we report the isolation and characterization of all‐silicon 1,3‐cyclobutanediyls as stable closed‐shell singlet species from the reversible reactions of cyclotrisilene c‐Si₃Tip₄ (Tip=2,4,6‐triisopropylphenyl) with the N‐heterocyclic silylenes c‐[(CR₂CH₂)(NtBu)₂]Si: (R=H or methyl) with saturated backbones. At elevated temperatures, tetrasilacyclobutenes are obtained from these equilibrium mixtures. The corresponding reaction with the unsaturated N‐heterocyclic silylene c‐(CH)₂(NtBu)₂Si: proceeds directly to the corresponding tetrasilacyclobutene without detection of the assumed 1,3‐cyclobutanediyl intermediate.     

Strychninium N‐phthaloyl‐β‐alaninate N‐phthaloyl‐β‐alanine and brucinium N‐phthaloyl‐β‐alaninate 5.67‐hydrate

Comparison of the structures of strychninium N‐phthaloyl‐β‐alaninate N‐phthaloyl‐β‐alanine, C₂₁H₂₃N₂O₂⁺·C₁₁H₈NO₄⁻·C₁₁H₉NO₄, and brucinium N‐phthaloyl‐β‐alaninate 5.67‐hydrate, C₂₃H₂₇N₂O₄⁺·C₁₁H₈NO₄⁻·5.67H₂O, reveals that, unlike strychninium cations, brucinium cations display a tendency to produce stacking inter­actions with cocrystallizing guests.     

Collective rotations of ferroelectric liquid crystals at the air/water interface

We study the Langmuir monolayers of four different ferroelectric liquid crystals on water surface. Two of them are attached to water surface by their polar groups, and the chiral groups, at the opposite ends of the elongated molecules, remain well above the interface. The other two ferroelectrics have both groups (polar and chiral) at close proximity, and therefore the chiral group is also attached to the surface or even submerged in water. We demonstrate that only when the chiral group of the ferroelectric liquid crystal in Langmuir monolayer is not attached to the interface and stays in the air does the system exhibit the collective rotations induced by evaporation of water (described for the first time by: Tabe, Y.; Yokoyama, H. Nat. Mater. 2003, 2, 806). The isotherms of surface pressure and surface potential versus molecular area of four compounds were measured with simultaneous observations using Brewster angle microscopy. Experimental data of the compression isotherms are described with a van der Waals model with very good accuracy, and the fitted parameters were used for calculations of compressibility coefficients for different phases found in the compounds under investigations. The ability of the two compounds for rotation and the disability of the two others is discussed in a context of thermodynamic properties of the monolayers.     

A Review of Ionic Liquids in Chromatographic and Electromigration Techniques

Although there have been numerous studies on the use of ionic liquids (IL) as solvents for synthesis and catalysis, there are many potential new fields for their application. The number of studies dealing with the use of ILs as additives to the mobile phase in LC and CZE and as a stationary phases in GC is constantly increasing. The main goal of the present paper is to gather together studies concerning the use of ILs in chromatographic techniques. The application of these substances as stationary phases, mobile phase additives and electroosmotic flow modifiers is discussed. Conversely, the application of separation methods in the analysis of ILs is also the subject of this review.     

1H, 13C and 15N NMR studies on adducts formation of rhodium(II) tetraacylates with some azoles in CDCl3 solution

Adduct formations of rhodium(II) tetraacetate and tetratrifluoroacetate with some 1H-imidazoles, oxazoles, thiazoles, 1H-pyrazoles and isoxazole have been investigated by the use of 1H, 13C, 15N NMR and electronic absorption spectroscopy (VIS) in the visible range. Azoles tend to form axial adducts containing rhodium(II) tetraacylates bonded via nitrogen atom. Bulky substituents close to the nitrogen atom prevent the Rh--N bond formation, and in several cases switch over the binding site to the oxygen or sulphur atoms. The (15)N adduct formation shift Deltadelta(15N) (Deltadelta = delta(adduct) - delta(ligand)) varied from ca - 40 to - 70 ppm for the nitrogen atom involved in complexation, and of a few parts per million only, from ca - 6 to 3 ppm, for the non-bonded nitrogen atom within the same molecule. The Deltadelta(1H) values do not exceed one ppm; Deltadelta(13C) ranges from - 1 to 6 ppm. Various complexation modes have been proved by electronic absorption spectroscopy in the visible region (VIS). For comparison purposes, some adducts of pyridine, thiophene and furan derivatives have been measured as well. The experimental findings were compared with calculated chemical shifts, obtained by means of DFT B3LYP method, using 6-311 + G(2d,p), 6-31(d)/LanL2DZ and 6-311G(d,p) basis set.     

Blue-Shift Hydrogen Bonds in Silyltriptycene Derivatives: Antibonding σ* Orbitals of the Si−C Bond as Effective Acceptors of Electron Density

Triptycene derivatives are widely utilized in different fields of chemistry and materials sciences. Their physicochemical properties, often of pivotal importance for the rational design of triptycene-based functional materials, are influenced by noncovalent interactions between substituents mounted on the triptycene skeleton. Herein, a unique interaction between electron-rich substituents in the peri position and the silyl group located on the bridgehead sp³-carbon is discussed on the example of 1,4-dichloro-9-(p-methoxyphenyl)-silyltriptycene (TRPCl) which exists in solution in the form of two rotamers differing by dispositions, syn or anti, of the Si−C_Ph (the C_Ph atom is from the p-methoxyphenyl group) bond against the peri-Cl atom. For the first time, substantial differences between the Si−C_Ph bonds in these two dispositions are identified, based on indirect experimental and direct theoretical evidence. For these two orientations, the experimental ¹J(Si,C_Ph) values differ by as much as 10 percent. The differences are explained in terms of effective electron density transfer from the peri-Cl atom to the antibonding σ* orbitals of the Si−X bonds (X=H, C_Ph) oriented anti to that atom. The electronic effects are revealed by an NBO analysis. Connections of these observations with the notion of blue-shifting hydrogen bonds are discussed.     

In a Quest for Selectivity Paired with Activity: A Ruthenium Olefin Metathesis Catalyst Bearing an Unsymmetrical Phenanthrene-Based N-Heterocyclic Carbene

Robust, selective, and stable in the presence of ethylene, ruthenium olefin metathesis pre-catalyst, {[3-benzyl-1-(10-phenyl-9-phenanthryl)]-2-imidazolidinylidene}dichloro(o-isopropoxyphenylmethylene)ruthenium(II), Ru-3 , bearing an unsymetrical N-heterocyclic carbene (uNHC) ligand, has been synthesized. The initiation rate of Ru-3 was examined by ring-closing metathesis and cross-metathesis reactions with a broad spectrum of olefins, showing an unprecendented selectivity. It was also tested in industrially relevant ethenolysis reactions of olefinic substrates from renewable feedstock with very good yields and selectivities.     

Organic Cage Dumbbells

Molecular dumbbells with organic cage capping units were synthesised via a multi-component imine condensation between a tri-topic amine and di- and tetra-topic aldehydes. This is an example of self-sorting, which can be rationalised by computational modelling.     

Kinetic versus Thermodynamic Control Over Multiple Conformations of Di-2,7-naphthihexaphyrin(1.1.1.1.1.1)

Di-2,7-naphthihexaphyrin(1.1.1.1.1.1), a non-aromatic carba-analogue of the hexaphyrin(1.1.1.1.1.1), incorporating two built-in 2,7-naphthylene moieties was synthesized as two separate, conformationally locked stereoisomers. Both conformers followed complex protonation pathways involving structurally different species, which can be targeted under kinetic and thermodynamic control. The neutralization of the ultimate dicationic product, accessible from both stereoisomers of the free base, allowed to realize the complex conformational switching cycle involving six structurally different species.     

The Identification of Cotton Fibers Dyed with Reactive Dyes for Forensic Purposes

Some of the most common microtraces that are currently collected at crime scenes are fragments of single fibers. The perpetrator leaves them at a crime scene or takes them away, for example, on their clothing or body. In turn, the microscopic dimensions of such traces mean that the perpetrator does not notice them and therefore usually does not take action to remove them. Cotton and polyester fibers dyed by reactive and dispersion dyes, respectively, are very popular within clothing products, and they are hidden among microtraces at the scene of a crime. In our recently published review paper, we summarized the possibilities for the identification of disperse dyes of polyester fibers for forensic purposes. In this review, we are concerned with cotton fibers dyed with reactive dyes. Cotton fibers are natural ones that cannot easily be distinguished on the basis of morphological features. Consequently, their color and consequently the dye composition are often their only characteristics. The presented methods for the identification of reactive dyes could be very interesting not only for forensic laboratories, but also for scientists working in food, cosmetics or pharmaceutical/medical sciences.