Atomic scale insights on chlorinated gamma-alumina surfaces

The thermochemistry of chlorinated gamma-alumina surfaces is explored by means of density functional calculations as a function of relevant reaction conditions used in experiments and in high-octane fuel production in the refining industry such as hydrocarbon isomerization and reforming. The role of chlorine as a dope of the Br?nsted acidity of gamma-alumina surfaces is investigated at an atomic scale. Combining infrared spectroscopy and density functional theory calculations, the most favorable location of chlorine atoms on the (110), (100) and (111) surfaces of gamma-alumina is found to result either from direct adsorption or from the exchange of basic hydroxyl groups. Moreover, the modification of the hydrogen bond network upon chlorine adsorption is put forward as a key parameter for changing the Br?nsted acidity. In a second step, we use a thermodynamic approach based on DFT total energy calculations corrected by the chemical potentials of HCl and H2O to determine the adsorption isotherms of chlorine and the relative surface concentration of hydroxyl groups and chlorine species on the gamma-alumina surfaces. The determination of chlorine content as a function of temperature and partial pressures of H2O and HCl offers new quantitative data required for optimizing the state of the support surface in industrial conditions. The mechanisms of chlorination are also discussed as a function of reaction conditions.     

Beta-H transfer from the metallacyclobutane: a key step in the deactivation and byproduct formation for the well-defined silica-supported rhenium alkylidene alkene metathesis catalyst

The surface complex [([triple bond]SiO)Re([triple bond]CtBu)(=CHtBu)(CH2tBu)] (1) is a highly efficient propene metathesis catalyst with high initial activities and a good productivity. However, it undergoes a fast deactivation process with time on stream, which is first order in active sites and ethene. Noteworthy, 1-butene and pentenes, unexpected products in the metathesis of propene, are formed as primary products, in large amount relative to Re (>1 equiv/Re), showing that their formation is not associated with the formation of inactive species. DFT calculations on molecular model systems show that byproduct formation and deactivation start by a beta-H transfer trans to the weak sigma-donor ligand (siloxy) at the metallacyclobutane intermediate having a square-based pyramid geometry. This key step has an energy barrier slightly higher than that calculated for olefin metathesis. After beta-H transfer, the most accessible pathway is the insertion of ethene in the Re-H bond. The resulting pentacoordinated trisperhydrocarbyl complex rearranges via either (1) alpha-H abstraction yielding the unexpected 1-butene byproduct and the regeneration of the catalyst or (2) beta-H abstraction leading to degrafting. These deactivation and byproduct formation pathways are in full agreement with the experimental data.     

Homoleptic 2-mercapto benzothiazolate uranium and lanthanide complexes

Treatment of [Ln(BH 4) 3(THF) 3] (Ln = Ce, Nd) with 3 and 4 mol equiv of KSBT in tetrahydrofuran (THF) led to the formation of [Ln(SBT) 3(THF)] and [K(THF)Ln(SBT) 4], respectively. The uranium(IV) compound [U(SBT) 4(THF) 2] was obtained from U(BH 4) 4 and was reversibly reduced by sodium amalgam into the corresponding anionic uranium(III) complex. The crystal structures of [Ln(SBT) 3(THF) 2] (Ln = Ce, Nd), [K(15-crown-5) 2][Nd(SBT) 4], [U(SBT) 4(THF)], and [K(15-crown-5) 2][U(SBT) 4(py)] show the bidentate coordination mode and the thionate character of the SBT ligand.     

Effect of headphone position on absolute threshold measurements

Pure-tone audiometry (measurement of absolute thresholds using pure tones) is the main test for the diagnosis of hearing loss. The aim of the present study is to determine whether the headphone placement over a listener’s ears has an influence on pure-tone audiometric tests, for a large frequency range, for Sennheiser HD600 and Telephonics TDH39 headphones. Audiograms (with 1 dB step, and including 10 frequencies up to 14 kHz) were performed several times on normal-hearing subjects, for different – or not different – headphone positions (allowing to dissociate between effects of headphone position and cognitive factors). Globally, the results seem to indicate that the reliability without headphone removing was quite close to the one observed with removing. The influence of removing did not appear more crucial for high frequencies. The rare frequencies for which a removing effect was seen seem to be function of the headphone model. Finally the results were quite different among the subjects.     

A microfluidic device based on droplet storage for screening solubility diagrams

This work describes a new microfluidic device developed for the rapid screening of solubility diagrams. In several parallel channels, hundreds of nanolitre volume droplets of a given solution are first stored with a gradual variation in the solute concentration. Then, the application of a temperature gradient along these channels enables us to read directly and quantitatively phase diagrams, concentration vs. temperature. We show, using a solution of adipic acid, that we can measure ten points of the solubility curve in less than 1 hr and with only 250 microL of solution.     

Electroacoustic miniaturized DNA-biosensor

A micrometer-sized electroacoustic DNA-biosensor was developed. The device included a thin semi-crystalline polyethylene terephthalate (PET) dielectric layer with two Ag microband electrodes on one side and a DNA thiol-labeled monolayer adsorbed on a gold surface on the other. A resonance wave was observed at 29 MHz with a network analyzer, upon AC voltage application between the two Ag electrodes, corresponding to electromechanical coupling induced by molecular dipoles of the PET polymer chain in the dielectric layer. It was found that the device size and geometry were well adapted to detect DNA hybridization, by measuring the capacity of the resonance response evolution: hybridization induced polarization of the dielectric material that affected the electromechanical coupling established in the dielectric layer. The 0.2 mm(2) sensor sensitive area allows detection in small volumes and still has higher detection levels for bioanalytical applications, the non-contact configuration adopted avoids electric faradic reactions that may damage biosensor sensitive layers, and finally, PET is a costless raw material, easy to process and well adapted for large scale production. The well-balanced technological and economic advantages of this kind of device make it a good candidate for biochip integration.     

Pickering emulsions with stimulable particles: from highly- to weakly-covered interfaces

We study oil-in-water emulsions stabilised by pH-sensitive colloidal silica or latex particles. Depending on the composition of the continuous phase, the same type of particles and the same emulsification process lead to emulsions characterised either by large drops densely covered by the particles, or to small droplets which are weakly covered. The two kinetically stable states can be tuned reversibly by using pH or salinity as compositional stimuli. We examine the emulsions' behaviour in these two limiting cases and we discuss the possible mechanisms allowing stabilisation, especially in the case of low surface coverage.