Homogeneous hydrogels made with acrylic acid,acrylamide and chemically functionalized carbon nanotubes

Carbon nanotubes (CNTs) chemically functionalized were used to synthesize a series of novel nanocomposite hydrogels by in situ polymerization with acrylic acid (AA) and acrylamide (AM). A novel strategy was developed to prepare these hydrogels. CNTs were functionalized following a three-step chemical procedure: (i) purified carbon nanotubes (CNTs_p) were partially surface oxidized to obtain CNTs with hydroxyl, carbonyl and carboxyl groups on their sidewalls (CNTs_oxi), (ii) CNTs_oxi were reacted with oxalyl chloride to obtain CNTs functionalized with acyl chloride groups (CNTs_OCl), and (iii) CNTs_OCl were reacted with acrylic acid (AA). The product, AA modified CNTs_OCl (CNTs_OCl-AA) was used to prepare the (CNTs_OCl-AA-AM) nanocomposite hydrogels, where anhydride groups were tethered to the surface of the CNTs_OCl-AA. The swelling process in water was evaluated as a consequence of the anhydride group hydrolysis, which broke some chemical links between CNTs_OCl-AA and crosslinked AA-AM network. Equilibrium-swelling values of all hydrogels increased as the content of AA increased and were larger for AA-AM hydrogels than for CNTs_OCl-AA-AM nanocomposite hydrogels. Young’s moduli of CNTs_OCl-AA-AM nanocomposite hydrogels prepared with 1 or 2?wt.% AA, reached larger values than those measured for AA-AM hydrogels. This tendency was reversed when the AA content was raised to 3?wt.%.     

Role of reaction atmosphere in preparation of potassium tantalate through sol–gel method

Potassium tantalate (KT) thin films and powders of both K₂Ta₂O₆ (KT pyrochlore) and KTaO₃ (KT perovskite) structures were prepared by means of chemical solution deposition method using Si(111) with ZnO and MgO buffer layers as a substrate. The influence of reaction atmosphere on reaction pathway and phase composition for both KT powders, and KT thin films has been studied mainly by means of powder diffraction and infrared spectroscopy. When an oxygen flow instead of static air atmosphere has been used the process of pyrolysis in oxygen runs over much narrower temperature interval (200–300 °C), relatively to air atmosphere (200–600 °C) and almost no (in case of powders), or no (in case of thin films) pyrochlore intermediate phase has been detected in comparison with treatment in air, where the pyrochlore phase is stable at temperatures 500–600 °C (powders). KT perovskite phase starts to crystallize at temperatures 50° and 150 °C lower compared to air atmosphere in case of powders and thin films, respectively. Microstructure formed by near-columnar grains and small grains of equiaxed shape was observed in films treated in oxygen and air atmosphere, respectively.     

Divalent cations reduce the pH sensitivity of OmpF channel inducing the pK(a) shift of key acidic residues

In contrast to the highly-selective channels of neurophysiology employing mostly the exclusion mechanism, different factors account for the selectivity of large channels. Elucidation of these factors is essential for understanding the permeation mechanisms in ion channels and their regulation in vivo. The interaction between divalent cations and a protein channel, the bacterial porin OmpF, has been investigated paying attention to the channel selectivity and its dependence on the solution pH. Unlike the experiments performed in salts of monovalent cations, the channel is now practically insensitive to pH, being anion selective all over the pH range considered. Electrostatic calculations based on the available structural data suggest that the binding of divalent cations has two main effects: (i) the pK(a) values of key ionizable groups differ significantly from those of the isolated groups in solution and (ii) the cation binding has a decisive impact on the effective electric charge regulating the channel selectivity. A simple molecular model based on statistical thermodynamics provides additional qualitative explanations to the experimental findings that could also be useful for other related systems like synthetic nanopores, ion exchange membranes, and polyelectrolyte multilayers.     

The O((1)D) + H2 (X (1)Σ+, v, j) → OH(X (2)Π, v', j') + H((2)S) reaction at low collision energy: when a simple statistical description of the dynamics works

In this communication, we highlight that statistical approaches for chemical reactions describe reasonably well the low energy dynamics of the title process. Consequently, such methods prove to be valuable to compute rate constants from low to room temperatures. Results are compared with experiment and recent precise quantum wave packet calculations [J. Phys. Chem. A, 2009, 113, 5285].     

Studies on Immobilization and Partial Characterization of Lipases from Wheat Seeds (<Emphasis Type="Italic">Triticum aestivum</Emphasis>)

The objective of this study was to provide some features on immobilization and partial characterization of lipases from wheat seeds. The optimum pH and temperature were found to be 5.5 and 32–37 °C, respectively. The stability of the concentrated enzymatic extract to high temperatures (25, 35, 45, and 55 °C) showed that the incubation of the extract at 55 °C led to its complete inactivation. The concentrated enzymatic extract kept 90% of its hydrolytic and esterification activities until 70 and 40 days of storage at 4 °C, respectively. The extract presented higher hydrolytic specificity to substrates of medium and long chains and higher esterification affinity to fatty acids of short and medium chains and alcohols with two and three carbon atoms. After the immobilization process using activated coal and sodium alginate as supports, an enhancement of about threefold in lipase activity was observed. The development of the present work permitted us to point out some characteristics of lipases from wheat seeds necessary for the proposition of new future industrial applications for this important biocatalyst.     

Comprehensive analysis of polycyclic aromatic hydrocarbons in wastewater using stir bar sorptive extraction and gas chromatography coupled to tandem mass spectrometry

The objective of this study was the optimization and comparison of two extraction methods for the determination of polycyclic aromatic hydrocarbons (PAHs) in wastewater (WW). A distribution study of the target compounds between the aqueous phase and the suspended particulate matter (SPM) has been performed in order to establish whether the analysis of both phases is necessary. In this sense, the feasibility of stir bar sorptive extraction (SBSE) and solid-phase extraction (SPE) for the determination of 24 PAHs in WW samples has been evaluated. The results demonstrated the suitability of SBSE to perform a comprehensive analysis of liquid samples containing high amounts of SPM, such as in the determination of PAHs in WWs. A gas chromatography triple quadrupole mass spectrometry (GC-QqQ-MS/MS) method has been also optimized for the separation and detection of the target compounds, avoiding the co-elution of some groups of isomers, such as benzo[b], [j] and [k] fluoranthenes and indene[1,2,3-cd]pyrene/dibenz[a,h]anthracene. For that purpose, a specific capillary column developed for PAH determination was used. The SBSE procedure was validated and adequate parameters (such as recovery, linearity, precision, limits of detection and quantification) were obtained. Finally, the validated method was applied to the analysis of real samples collected from an experimental WW treatment plant, detecting some PAHs at concentrations in the range 0.007-0.022 μg L(-1).     

Electrospray ionization mass spectrometric fragmentation of hydroquinone derivatives

The fragmentation patterns of nine di-, tri- and tetracyclic hydroquinones with potential antitumor activity were rationalized by invoking competing mechanisms that included sterically accelerated homolytic cleavage, Meerwein-type rearrangements and dehydrations through elimination or intramolecular nucleophilic substitution.     

Enantioselective conjugate addition of nitro compounds to α,β-unsaturated ketones: an experimental and computational study

A series of chiral thioureas derived from easily available diamines, prepared from α-amino acids, have been tested as catalysts in the enantioselective Michael additions of nitroalkanes to α,β-unsaturated ketones. The best results are obtained with the bifunctional catalyst prepared from L-valine. This thiourea promotes the reaction with high enantioselectivities and chemical yields for aryl/vinyl ketones, but the enantiomeric ratio for alkyl/vinyl derivatives is very modest. The addition of substituted nitromethanes led to the corresponding adducts with excellent enantioselectivity but very poor diastereoselectivity. Evidence for the isomerization of the addition products has been obtained from the reaction of chalcone with [D(3)]nitromethane, which shows that the final addition products epimerize under the reaction conditions. The epimerization explains the low diastereoselectivity observed in the formation of adducts with two adjacent tertiary stereocenters. Density functional studies of the transition structures corresponding to two alternative activation modes of the nitroalkanes and α,β-unsaturated ketones by the bifunctional organocatalyst have been carried out at the B3LYP/3-21G* level. The computations are consistent with a reaction model involving the Michael addition of the thiourea-activated nitronate to the ketone activated by the protonated amine of the organocatalyst. The enantioselectivities predicted by the computations are consistent with the experimental values obtained for aryl- and alkyl-substituted α,β-unsaturated ketones.     

A pyrophosphate-responsive gadolinium(III) MRI contrast agent

This study shows that the relaxivity and optical properties of functionalised lanthanide‐DTPA‐bis‐amide complexes (lanthanide=Gd³⁺ and Eu³⁺, DTPA=diethylene triamine pentaacetic acid) can be successfully modulated by addition of specific anions, without direct Ln³⁺/anion coordination. Zinc(II)‐dipicolylamine moieties, which are known to bind strongly to phosphates, were introduced in the amide “arms” of these ligands, and the interaction of the resulting Gd–Zn₂ complexes with a range of anions was screened by using indicator displacement assays (IDAs). Considerable selectivity for polyphosphorylated species (such as pyrophosphate and adenosine‐5′‐triphosphate (ATP)) over a range of other anions (including monophosphorylated anions) was apparent. In addition, we show that pyrophosphate modulates the relaxivity of the gadolinium(III) complex, this modulation being sufficiently large to be observed in imaging experiments. To establish the binding mode of the pyrophosphate and gain insight into the origin of the relaxometric modulation, a series of studies including UV/Vis and emission spectroscopy, luminescence lifetime measurements in H₂O and D₂O, ¹⁷O and ³¹P NMR spectroscopy and nuclear magnetic resonance dispersion (NMRD) studies were carried out.     

Sodium congener of the classical lithium methylchromate dimer: synthetic, X-ray crystallographic, and magnetic studies of Me8Cr2[Na(OEt2)]4

One of the milestone structures in the development of transition-metal complexes with metal-metal bonds of multiple bond order was the lithium methylchromate dimer Me(8)Cr(2)[Li(donor)](4) (donor = THF or Et(2)O). Using a simple salt metathesis reaction mixing this compound with sodium tert-butoxide, the sodium congener Me(8)Cr(2)[Na(OEt(2))](4) has been synthesized as a green crystalline compound and isolated in 51% yield. Its solid-state structure was determined by single-crystal X-ray diffraction. Exhibiting exact crystallographic C(4h) symmetry, this heavier alkali-metal chromate structure is also dimeric, formally comprising a (Me(8)Cr(4))(4-) tetranionic core with four peripheral Na(+) cations carrying supporting ether ligands. Its salient feature is the long Cr···Cr distance of 3.263(2) ?, which is remarkably elongated compared to that in the lithium THF-solvated congener [1.968(2) ?]. With respect to the methyl C atoms, the Cr coordination is distorted-square-planar. Each Na(+) interacts with four methyl C atoms, and there are also some short Na···H(C) contacts. Unlike for lithium chromate, no NMR spectroscopic data could be obtained for sodium chromate. The paramagnetic character of sodium chromate was confirmed by variable-temperature magnetization measurements, which indicated antiferromagnetic behavior.