Vibro-impact analysis of two adjacent cantilever beams

Nonlinear Dynamics - This study analyzes the vibro-impact behavior of two adjacent cantilever beams subjected to vibration generated by applying harmonic excitation to their rigid base. For the...     

Thermal Hysteresis Accompanying Incommensurate-Commensurate Phase Transition in Mixed Crystals (K1-xCsx)2ZnCl4

The mixed crystal (K_1-xCs_x)₂ZnCl₄ with x = 0, 0.001, 0.01, 0.1, and 0.2 with optical quality has been grown by the Czochralski method. Using the Atomic Absorption Spectroscopy (AAS) and Energy Dispersive Spectroscopy (EDS), we determined the amount of Cs ion included in the mixed crystal. By using of DTA and DSC, we observed the change of T_c and T_i. The thermal hysteresis in the dielectric constants show strong dependence on the thermal process and on the amount of impurity which are explained by the influence of the thermal process and impurity, respectively on the creation, annihilation, and growth of discommensuration (DC).     

Synthesis and size control of monodisperse copper nanoparticles by polyol method

We describe herein the synthesis of metallic copper nanoparticles in the presence of poly(vinylpyrrolidone), employed as a protecting agent, via a polyol method in ambient atmosphere. The obtained copper particles were confirmed by XRD to be crystalline copper with a face-centered cubic (fcc) structure. We observed monodisperse spherical copper nanoparticles with a diameter range 45+/-8 nm. The particle size and its distribution are controlled by varying the synthesis parameters such as the reducing agent concentration, reaction temperature, and precursor injection rate. The precursor injection rate plays an important role in controlling the size of the copper nanoparticles. On the basis of XPS and HRTEM results, we demonstrate that the surface of the copper is surrounded by amorphous CuO and that poly(vinylpyrrolidone) is chemisorbed on the copper surface.     

Cu2O/CuO Electrocatalyst for Electrochemical Reduction of Carbon Dioxide to Methanol

Herein, we report the controlled and direct fabrication of Cu₂O/CuO thin film on the conductive nickel foam using electrodeposition route for the electrochemical reduction of carbon dioxide (CO₂) to methanol. The electrocatalytic reduction was performed in CO₂ saturated aqueous solution consisting of KHCO₃, pyridine and HCl at room temperature. CO₂ reduction was carried out at a constant potential of −1.3 V for 120 min to study the electrochemical performance of the prepared electrocatalysts. Cu₂O/CuO shows better electrocatalytic activity with highest current density of 46 mA/cm². The prepared catalyst can be an efficient and selective electrode for the production of methanol.     

Catholyte‐Free Electrocatalytic CO2 Reduction to Formate

Electrochemical reduction of carbon dioxide (CO₂) into value‐added chemicals is a promising strategy to reduce CO₂ emission and mitigate climate change. One of the most serious problems in electrocatalytic CO₂ reduction (CO₂R) is the low solubility of CO₂ in an aqueous electrolyte, which significantly limits the cathodic reaction rate. This paper proposes a facile method of catholyte‐free electrocatalytic CO₂ reduction to avoid the solubility limitation using commercial tin nanoparticles as a cathode catalyst. Interestingly, as the reaction temperature rises from 303 K to 363 K, the partial current density (PCD) of formate improves more than two times with 52.9 mA cm^?2, despite the decrease in CO₂ solubility. Furthermore, a significantly high formate concentration of 41.5 g L^?1 is obtained as a one‐path product at 343 K with high PCD (51.7 mA cm^?2) and high Faradaic efficiency (93.3 %) via continuous operation in a full flow cell at a low cell voltage of 2.2 V.     

Preparation and characterization of self-assembled nanoparticles based on glycol chitosan bearing adriamycin

An anthracycline drug, adriamycin, was chemically conjugated onto the backbone of glycol chitosan via an acid-labile cis-aconityl linkage. The physicochemical characteristics of the glycol chitosan–adriamycin (GC–ADR) conjugates were investigated by dynamic light scattering, atomic force microscopy, and fluorescence spectroscopy. The GC–ADR conjugates were capable of forming nano-sized self-aggregates in an aqueous medium, when the adriamycin content in the conjugate was in the range of 2.0–5.0 wt.%. The self-aggregates were spherical in shape, and had mean diameters of 238–304 nm, depending on the adriamycin content. The critical aggregation concentrations of the conjugates, estimated by the fluorescence quenching method, were as low as 1.0–2.5×10⁻² mg/ml. The size of self-aggregates was not affected by the polymer concentration in the range from 50 to 2,000 μg/ml, and was maintained up to 8 days in phosphate-buffered saline (pH 7.4), indicating high colloidal stability. The release of adriamycin from self-aggregates was significantly dependent on the pH of the medium due to the cis-aconityl linkage; e.g., the amount of adriamycin released for 4 days was 7.3±0.3% at pH 7, whereas it was 29.3±1.9% at pH 4. The cell viability results demonstrated that free adriamycin shows more potent cytotoxicity than the conjugates, primarily attributed to the sustained release of adriamycin from self-aggregates. In conclusion, the self-aggregates, formed by GC–ADR conjugates, might be useful for the site-specific delivery of adriamycin in a sustained manner.     

Fabrication of thermo-responsive polymer nanocomposites for smart window applications

Abstract

Thermo-responsive polymers have attracted much attention in recent years because they can provide a variety of applications for smart devices, but the lack of sufficient mechanical properties and late response rate of the polymers limit their applications. In the current work, we fabricated polymer nanocomposites made from poly(vinyl methyl ether) and nanofillers with photothermal conversion property such as graphene oxide, antimony tin oxide nanoparticles, and silver nanoplates. The prepared nanocomposites showed rapidly reversible and reliable transparent-opaque transitions during the repeated heating and cooling processes, suggesting that they can be applied to smart window applications.     

On-line trace enrichment for the simultaneous determination of microcystins in aqueous samples using high-performance liquid chromatography with diode-array detection.

The need for a rapid, sensitive and reliable analytical method for cyanobacterial toxins, microcystins, has been emphasized by the awareness of toxic cyanobacteria as a human-health risk through drinking water. A new high-performance liquid chromatographic method with column switching was developed for the determination of microcystin-LR, -RR and -YR from water samples without pre-purification. The filtered water sample was passed through a Zorbax CN precolumn at a flow-rate of 3 ml/min for on-line trace enrichment. After valve switching, concentrated analytes were eluted in back-flush mode and separated on a Luna C18 column with a gradient of acetonitrile -20 mM phosphate buffer (pH 2.5). The method showed excellent precision, accuracy and speed with detection limits of 0.02 microgram/ml from 100 ml of surface water. The total analysis time per sample was about 90 min. This method improves reliability, sensitivity and sample throughput, and shortens the analysis time compared to analysis methods using off-line solid-phase extraction.