Continuous separation of microparticles in a microfluidic channel via the elasto-inertial effect of non-Newtonian fluid

Pure separation and sorting of microparticles from complex fluids are essential for biochemical analyses and clinical diagnostics. However, conventional techniques require highly complex and expensive labeling processes for high purity separation. In this study, we present a simple and label-free method for separating microparticles with high purity using the elasto-inertial characteristic of a non-Newtonian fluid in microchannel flow. At the inlet, particle-containing sample flow was pushed toward the side walls by introducing sheath fluid from the center inlet. Particles of 1 μm and 5 μm in diameter, which were suspended in viscoelastic fluid, were successfully separated in the outlet channels: larger particles were notably focused on the centerline of the channel at the outlet, while smaller particles continued flowing along the side walls with minimal lateral migration towards the centerline. The same technique was further applied to separate platelets from diluted whole blood. Through cytometric analysis, we obtained a purity of collected platelets of close to 99.9%. Conclusively, our microparticle separation technique using elasto-inertial forces in non-Newtonian fluid is an effective method for separating and collecting microparticles on the basis of size differences with high purity.     

Reactivity of acid fluoride-terminated self-assembled monolayers on gold

This report describes the reactivity of acid fluoride (AF)-terminated self-assembled monolayers (SAMs) on gold toward amine and alcohol compounds and the potentiality of AF as a reactive intermediate for surface functionalizations. The AF group was generated in situ on a gold surface by reacting the terminal carboxylic acid group in the SAM of 16-mercaptohexadecanoic acid with cyanuric fluoride and pyridine under the optimized conditions. AF was found to be highly reactive toward various amine groups, such as primary and secondary amines, but it did not react effectively with alcohol. In addition, the amide coupling reaction by microcontact printing (microCP) was compared with the solution-based reaction: when amine-derivatized ferrocene compound was used for 1-min microCP on the AF-activated surface, the surface coverage of the reaction product was about 83% of 3.45 x 1014 cm-2, the coverage obtained in the solution-based reaction. On the basis of the high reaction efficiency of microCP, the AF-activated surface was also used as a platform for patterning a biological ligand, biotin.     

Picosecond multidimensional fluorescence spectroscopy: a tool to measure real-time protein dynamics during function

Advanced multidimensional time-correlated single photon counting (mdTCSPC) and picosecond time-resolved fluorescence in combination with site-directed fluorescence labeling are valuable tools to study the properties of membrane protein surface segments on the pico- to nanoseconds time scale. Time-resolved fluorescence anisotropy changes of protein bound fluorescent probes reveal changes in protein dynamics and steric restriction. In addition, the change in fluorescence lifetime and intensity of the covalently bound fluorescent dye is indicative of environmental changes at the protein surface. In this study, we have measured the changes in fluorescence lifetime traces of the fluorescent dye fluorescein covalently bound to the first cytoplasmic loop of bacteriorhodopsin (bR) after light activation of protein function. The fluorescence is excited by a picosecond laser pulse. The retinylidene chromophore of bR is light-activated by a 10 ns laser pulse, which in turn triggers recording of a sequence of fluorescence lifetime traces in the mdTCSPC-module. The fluorescence decay changes upon protein function occur predominantly in the 100 ps time range. The kinetics of these changes shows two transitions between three intermediate states in the second part of the bR photocycle. Correlation with photocycle kinetics allows for the determination of reaction intermediates at the proteins surface which are coupled to changes in the retinal binding pocket.     

Chiral molecular squares based on angular bipyridines: self-assembly, characterization, and photophysical properties

Chiral molecular squares 1-12 based on [M(dppe)](2+) metallocorners (M = Pd or Pt, and dppe = bis(diphenylphosphino)ethane) and new angular bipyridine bridging ligands derived from the 1,1'-binaphthyl framework were readily assembled and characterized by a variety of techniques including infrared, UV-vis, circular dichroism (CD), and NMR spectroscopy, and ESI mass spectrometry. All these chiral metallocycles are highly luminescent in solution at room temperature with quantum efficiency of 0.06-0.63. Interestingly, when equal molar enantiopure molecular squares of opposite handedness were mixed in solution, a new meso dimeric metallocycle with C(2) symmetry formed. This result indicates the lability of the M-pyridyl bonds in these metallocycles, which may hinder their applications in many enantioselective processes.     

Polyatomic anion versus acetonitrile in coordinating ability: structural properties of AgX-bearing 1,4-bis(2-isonicotinoyloxyethyl)piperazine (X??=?NO3?, CF3SO3?, ClO4?, BF4?, and PF6?)

Type studies on competitive polyatomic anion versus acetonitrile coordination in the self-assembly of a series of [Ag₂(X) _m (bip)(NCCH₃) _n ](X)_2−m (X⁻ = NO₃ ⁻, CF₃SO₃ ⁻, ClO₄ ⁻, BF₄ ⁻, and PF₆ ⁻; m = 0, 2; n = 0, 2, 4; bip = 1,4-bis(2-isonicotinoyloxyethyl)piperazine) were carried out. Each bip spacer acts as an N₄ tetradentate ligand and is linked to four silver(I) centers through two pyridine and two piperazine moieties, producing a double strand consisting of two 20-membered ring units. The coordinating environment around the silver(I) center is subtly determined by the competition of the polyatomic anions with acetonitrile, that is, by the Ag···NCCH₃ versus Ag···X interactions. The coordinating ability of acetonitrile is inversely proportional to the order of the coordination ability of the Hoffmeister series of polyatomic anions, NO₃ ⁻ ≫ CF₃SO₃ ⁻ > ClO₄ ⁻ > BF₄ ⁻ ≫ PF₆ ⁻.     

Feasibility of light-emitting diode uses for annular reactor inner-coated with TiO2 or nitrogen-doped TiO2 for control of dimethyl sulfide

Limited environmental pollutants have only been investigated for the feasibility of light‐emitting diodes (LED) uses in photocatalytic decomposition (PD). The present study investigated the applicability of LEDs for annular photocatalytic reactors by comparing PD efficiencies of dimethyl sulfide (DMS), which has not been investigated with any LED‐PD system, between photocatalytic systems utilizing conventional and various LED lamps with different wavelengths. A conventional 8 W UV/TiO₂ system exhibited a higher DMS PD efficiency as compared with UV‐LED/TiO₂ system. Similarly, a conventional 8 W visible‐lamp/N‐enhanced TiO₂ (NET) system exhibited a higher PD efficiency as compared with six visible‐LED/NET systems. However, the ratios of PD efficiency to the electric power consumption were rather high for the photocatalytic systems using UV‐ or visible‐LED lamps, except for two LED lamps (yellow‐ and red‐LED lamps), compared to the photocatalytic systems using conventional lamps. For the photocatalytic systems using LEDs, lower flow rates and input concentrations and shorter hydraulic diameters exhibited higher DMS PD efficiencies. An Fourier‐transformation infrared analysis suggested no significant absorption of byproducts on the catalyst surface. Consequently, it was suggested that LEDs can still be energy‐efficiently utilized as alternative light sources for the PD of DMS, under the operational conditions used in this study.     

Identification of a lacosamide binding protein using an affinity bait and chemical reporter strategy: 14-3-3 ζ

We have advanced a useful strategy to elucidate binding partners of ligands (drugs) with modest binding affinity. Key to this strategy is attaching to the ligand an affinity bait (AB) and a chemical reporter (CR) group, where the AB irreversibly attaches the ligand to the receptor upon binding and the CR group is employed for receptor detection and isolation. We have tested this AB&CR strategy using lacosamide ((R)-1), a low-molecular-weight antiepileptic drug. We demonstrate that using a (R)-lacosamide AB&CR agent ((R)-2) 14-3-3 ζ in rodent brain soluble lysates is preferentially adducted, adduction is stereospecific with respect to the AB&CR agent, and adduction depends upon the presence of endogenous levels of the small molecule metabolite xanthine. Substitution of lacosamide AB agent ((R)-5) for (R)-2 led to the identification of the 14-3-3 ζ adduction site (K120) by mass spectrometry. Competition experiments using increasing amounts of (R)-1 in the presence of (R)-2 demonstrated that (R)-1 binds at or near the (R)-2 modification site on 14-3-3 ζ. Structure-activity studies of xanthine derivatives provided information concerning the likely binding interaction between this metabolite and recombinant 14-3-3 ζ. Documentation of the 14-3-3 ζ-xanthine interaction was obtained with isothermal calorimetry using xanthine and the xanthine analogue 1,7-dimethylxanthine.     

5-(4-Hydroxy-2,3,5-trimethylbenzylidene) thiazolidine-2,4-dione attenuates atherosclerosis possibly by reducing monocyte recruitment to the lesion

A variety of benzylidenethiazole analogs have been demonstrated to inhibit 5-lipoxygenase (5-LOX). Here we report the anti-atherogenic potential of 5-(4-hydroxy- 2,3,5-trimethylbenzylidene) thiazolidin-2,4-dione (HMB-TZD), a benzylidenethiazole analog, and its potential mechanism of action in LDL receptor-deficient (Ldlr-/-) mice. HMB-TZD Treatment reduced leukotriene B4 (LTB4) production significantly in RAW264.7 macrophages and SVEC4-10 endothelial cells. Macrophages or endothelial cells pre-incubated with HMB-TZD for 2 h and then stimulated with lipopolysaccharide or tumor necrosis factor-alpha (TNF-α) displayed reduced cytokine production. Also, HMB-TZD reduced cell migration and adhesion in accordance with decreased proinflammatory molecule production in vitro and ex vivo. HMB-TZD treatment of 8-week-old male Ldlr-/- mice resulted in significantly reduced atherosclerotic lesions without a change to plasma lipid profiles. Moreover, aortic expression of pro-atherogenic molecules involved in the recruitment of monocytes to the aortic wall, including TNF-α , MCP-1, and VCAM-1, was downregulated. HMB-TZD also reduced macrophage infiltration into atherosclerotic lesions. In conclusion, HMB-TZD ameliorates atherosclerotic lesion formation possibly by reducing the expression of proinflammatory molecules and monocyte/macrophage recruitment to the lesion. These results suggest that HMB-TZD, and benzylidenethiazole analogs in general, may have therapeutic potential as treatments for atherosclerosis.     

Micro-droplet detection and characterization using thermal responses

We suggest a novel method to detect droplets and determine the protein content of droplets in microfluidic system using the 3ω method, which is a powerful tool to easily detect thermal response changes with a simple device. By measuring the thermal response of droplets and a carrying flow in real time, water droplets in an oleic acid carrying flow can be detected, and the concentration of bovine serum albumin in droplets can be estimated. This method is expected to increase the practicality and power of droplet-based microfluidic systems.