Intramolecular [4+2] cycloaddition of furfurylsubstituted homoallylamines to allylhalides,acryloyl chloride and maleic anhydride

Acylation of 4‐(furyl‐2)‐4‐R‐aminobut‐1‐enes and 4‐R‐4‐furfurylaminobut‐1‐enes with maleic anhydride, acryloyl chloride or allylhalides provided 3‐aza‐10‐oxatricyclo[5.2.1.0^1,5]decenes. The tricycles are formed via an initial amide formation followed by a stereoselective exo‐IMDAF (Intramolecular Diels‐Alder of Furan). In case of competing cycloaddition (for compounds possessing two furan or two dienophilic moieties) the most substituted fivemembered cycle is preferably annulated. Refluxing of 4‐R‐4‐furfurylaminobut‐1‐enes in acetic anhydride led to exo‐3‐aza‐11‐oxatricyclo[6.2.1.0^1,6]undecenes with the pseudoequatorial substituent R‐4. Treatment of 3‐aza‐10‐oxatricyclo[5.2.1.0^1,5]decenes with PPA at 90?110°C promoted cyclic ether opening, aromatization and intramolecular cyclization reactions sequence to give the corresponding tetracyclic compounds — tetrahydroisoindolo[2,1‐a]quinolines and tetrahydroisoindolo[2,1‐b][2]benzazepines in good yields. Unusual products of ipso‐substitution in aromatic ring were obtained on cyclization of N‐p‐R‐substituted 2‐allyl‐4‐oxo‐3‐aza‐10‐oxatricyclo[5.2.1.0^1,5]dec‐8‐enes.     

Determination of perfluorinated compounds in mollusks by matrix solid-phase dispersion and liquid chromatography–tandem mass spectrometry

Perfluorinated compounds (PFCs) have been used for over 40 years in different commercial and industrial applications mainly as surfactants and surface protectors and have become an important class of marine emerging pollutants. This study presents the development and validation of a new analytical method to determine the simultaneous presence of eight PFCs in different kinds of mollusks using matrix solid-phase dispersion (MSPD) followed by liquid chromatography–tandem mass spectrometry (LC-MS/MS). Simplicity of the analytical procedure, low volume of solvent and quantity of sample required, low global price, and integration of extraction and clean-up into a single step, are the most important advantages of the developed methodology. Solvent, solid support (dispersing agent), clean-up sorbent, and their amounts were optimized by means of an experimental design. In the final method, 0.5 g of sample are dispersed with 0.2 g of diatomaceous earth and transferred into a polypropylene syringe containing 4 g of silica as clean-up sorbent. Then, analytes are eluted with 20 mL of acetonitrile. The extract is finally concentrated to a final volume of 0.5 mL in methanol, avoiding extract dryness in order to prevent evaporation losses and injected in the LC-MS/MS. The combination of this MSPD protocol with LC-MS/MS afforded detection limits from 0.05 to 0.3 ng g⁻¹. Also, a good linearity was established for the eight PFCs in the range from limit of quantification (LOQ) to 500 ng mL⁻¹ with R ² > 0.9917. The recovery of the method was studied with three types of spiked mollusk and was in the 64–126% range. Moreover, a mussel sample was spiked and aged for more than 1 month and analyzed by the developed method and a reference method, ion-pair extraction, for comparison, producing both methods statistically equal concentration values. The method was finally applied to the determination of PFCs in different kinds of mollusks revealing concentrations up to 8.3 ng g⁻¹ for perfluoroundecanoic acid.     

Automated microfluidic platform for studies of carbon dioxide dissolution and solubility in physical solvents

We present an automated microfluidic (MF) approach for the systematic and rapid investigation of carbon dioxide (CO(2)) mass transfer and solubility in physical solvents. Uniformly sized bubbles of CO(2) with lengths exceeding the width of the microchannel (plugs) were isothermally generated in a co-flowing physical solvent within a gas-impermeable, silicon-based MF platform that is compatible with a wide range of solvents, temperatures and pressures. We dynamically determined the volume reduction of the plugs from images that were accommodated within a single field of view, six different downstream locations of the microchannel at any given flow condition. Evaluating plug sizes in real time allowed our automated strategy to suitably select inlet pressures and solvent flow rates such that otherwise dynamically self-selecting parameters (e.g., the plug size, the solvent segment size, and the plug velocity) could be either kept constant or systematically altered. Specifically, if a constant slug length was imposed, the volumetric dissolution rate of CO(2) could be deduced from the measured rate of plug shrinkage. The solubility of CO(2) in the physical solvent was obtained from a comparison between the terminal and the initial plug sizes. Solubility data were acquired every 5 min and were within 2-5% accuracy as compared to literature data. A parameter space consisting of the plug length, solvent slug length and plug velocity at the microchannel inlet was established for different CO(2)-solvent pairs with high and low gas solubilities. In a case study, we selected the gas-liquid pair CO(2)-dimethyl carbonate (DMC) and volumetric mass transfer coefficients 4-30 s(-1) (translating into mass transfer times between 0.25 s and 0.03 s), and Henry's constants, within the range of 6-12 MPa.     

Preferred conformers of proteinogenic glutamic acid

The molecular shape of proteinogenic glutamic acid has been determined for the first time. Vaporization of the solid amino acid by laser ablation in combination with Fourier transform microwave spectroscopy made possible the detection of five different structures in a supersonic jet. These structures have been identified through their rotational and (14)N quadrupole coupling constants. All conformers show hydrogen bonds linking the amino and alpha carboxylic group through N-H···O═C (type I) or N···H-O (type II) interactions. In three of them there are additional hydrogen bonds established between the amino group and the carboxylic group in the gamma position. Entropic effects related to the side chain have been found to be significant in determining the most populated conformations.     

2[Mn(acacen)]+ + 1[Fe(CN)5NO]- polynuclear heterobimetallic coordination compounds of different dimensionality in the solid state

Depending on the synthetic conditions, five heterometallic Mn(III)Fe(II) polynuclear compounds with the same ratio of constituents, 2[Mn(acacen)](+)/[Fe(CN)(5)NO](2-), of different nuclearity and dimensionality (0D, 1D, 2D) were isolated. A [Mn(acacen)MeOH](2)[Fe(CN)(5)NO]·1.5MeOH, 1 complex has been prepared by reaction of Mn(III)/Schiff base (SB) complex, [Mn(acacen)Cl] (H(2)acacen is N,N'-ethylenebis(acetylacetoneimine)) with sodium nitroprusside (NP). Single crystal X-ray diffraction analyses reveal that crystallization of 1 from coordinating or non-coordinating solvents results in different coordination polynuclear materials: from C(2)H(5)OH [{Mn(acacen)H(2)O}(2)Fe(CN)(5)NO]·C(2)H(5)OH, 2, a trinuclear complex is formed; from CH(3)CN [{Mn(acacen)H(2)O}(4)Fe(CN)(5)NO][Fe(CN)(5)NO]·4CH(3)CN, an ionic compound with a pentanuclear bimetallic cation is formed 3; from i-C(3)H(7)OH [{Mn(acacen)}(2)(i-PrOH)Fe(CN)(5)NO](n), a coordination chain polymer 4 is formed; from toluene [{Mn(acacen)}(2)Fe(CN)(5)NO](n), a layered network 5 is formed. As the magnetic measurements show, for all compounds the weak interaction between Mn(III)S = 2 spins through the NP bridge is antiferromagnetic and exhibits no significant photoactivity.     

Examining metal nanoparticle surface chemistry using hollow-core, photonic-crystal, fiber-assisted SERS

In this Letter, we demonstrate the efficacy of hollow core photonic crystal fibers (HCPCFs) as a surface-enhanced Raman spectroscopy (SERS) platform for investigating the ligand exchange process on the surface of gold nanoparticles. Raman measurements carried out using this platform show the capability to monitor minute amounts of surface ligands on gold nanoparticles used as an SERS substrate. The SERS signal from an HCPCF exhibits a tenfold enhancement compared to that in a direct sampling scheme using a cuvette. Using exchange of cytotoxic cetyltrimethylammonium bromide with α-methoxy-ω-mercaptopoly(ethylene glycol) on the surface of gold nanorods as an exemplary system, we show the feasibility of using HCPCF SERS to monitor the change in surface chemistry of nanoparticles.     

Chiral Determination of Salbutamol, Salmeterol and Atenolol by Two-Dimensional LC–LC: Application to Urine Samples

A heart-cut two-dimensional high-performance liquid chromatography method for enantiomeric determination of salbutamol, salmeterol and atenolol in urine is presented. It involves the use of two separations in a liquid chromatography?Cliquid chromatography achiral?Cchiral coupling. Target compounds were previously separated in a primary column (Kinetex? HILIC, 2.6???m, 150?×?2.1?mm I.D.) with a mixture of MeOH:ACN:ammonium acetate buffer (5?mM, pH 6) 90:5:5 (v/v/v) as mobile phase at a flow rate of 0.40?mL?min^?1. Enantiomeric separation was carried out by transferring peak of each compound through a switching valve to a vancomycin chiral column (Chirobiotic? V, 2.6???m, 150?×?2.1?mm I.D.) using MeOH:ammonium acetate buffer (2?mM, pH 4) 97:3 (v/v) as mobile phase at a flow rate of 0.50?mL?min^?1. Ultraviolet detection was done at 227?nm. The method was applied to determine target analytes in urine samples after enzymatic hydrolysis with ??-glucuronidase from Helix pomatia, followed by a solid-phase extraction procedure using Isolute^? HCX mixed-mode cartridges. Extraction recoveries ranged from 82 to 90?% in urine samples. Detection limits were 0.091?C0.095???g for each enantiomer of atenolol and between 0.058 and 0.076 and 0.18?C0.14???g for enantiomers of salbutamol and salmeterol, respectively (3?mL of urine). Linearity ranges were between 0.5 and 10???g?mL^?1. Intraday and interday reproducibilities of enantiomeric ratio and enantiomeric fraction, expressed as relative standard deviation, were between 1.9 and 9.0?%. The optimized method was successfully applied to the analysis of urine samples obtained from excretion studies in volunteers and in freeze-dried urine samples, containing urinary components with MW?<?10,000 and components with MW?>?10,000, spiked with different amounts of studied drugs.     

Influence of Ca2+ on tetracycline adsorption on montmorillonite

The adsorption of tetracycline (TC) on montmorillonite was studied as a function of pH and Ca(2+) concentration using a batch technique complemented with X-ray diffraction and transmission electron microscopy. In the absence of Ca(2+), TC adsorption was high at low pH and decreased as the pH increased. In the presence of Ca(2+), at least two different adsorption processes took place in the studied systems, i.e., cation exchange and Ca-bridging. Cation exchange was the prevailing process at pH<5, and thus, TC adsorption decreased by increasing total Ca(2+) concentration. On the contrary, Ca-bridging was the prevailing process at pH>5, and thus, TC adsorption increased by increasing Ca(2+) concentration. The pH 5 represents an isoadsorption pH where both adsorption processes compensate each other. TC adsorption became independent of Ca(2+) concentration at this pH. For TC adsorption on Ca(2+)-montmorillonite in 0.01 M NaCl experiments, the ratio adsorbed TC/retained Ca(2+) was close to 1 in the pH range of 5-9, indicating an important participation of Ca(2+) in the binding of TC to montmorillonite. X-ray diffraction and transmission electron microscopy showed that TC adsorption induced intercalation between montmorillonite layers forming a multiphase system with stacking of layers with and without intercalated TC.     

Synthesis,solid-state photophysical properties and electropolymerization of novel diazulenyl ethenes

The novel 1,2-di(azulen-1-yl)cyclopent-1-ene 3 was conveniently synthesized via a two-step procedure involving Vilsmeier–Haack acylation of azulene with N,N,N′,N′-tetraethylglutaramide (TEGA) and POCl₃, followed by an intramolecular McMurry coupling of the resulting diketone. In contrast with the previously reported (E)-1,2-di(azulen-1-yl)ethene that shows negligible fluorescence in the solid state, alkene 3 displays fluorescence emission from the S₂ excited state of the azulene moieties. This compound easily polymerizes upon electrochemical oxidation, leading to the formation of a conducting polymer film at the electrode surface.     

Phosphopeptide selective coordination complexes as promising SRC homology 2 domain mimetics

Src Homology 2 (SH2) domains are the paradigm of phosphotyrosine (pY) protein recognition modules and mediate numerous cancer-promoting protein-protein complexes. Effective SH2 domain mimicry with pY-binding coordination complexes offers a promising route to new and selective disruptors of pY-mediated protein-protein interactions. We herein report the synthesis and in vitro characterization of a library of coordination complex SH2 domain proteomimetics. Compounds were designed to interact with phosphopeptides via a two-point interaction, principally with pY, and to make secondary interactions with pY+2/3, thereby achieving sequence-selective discrimination. Here, we report that lead mimetics demonstrated high target phosphopeptide affinity (K(a) ～ 10(7) M(-1)) and selectivity. In addition, biological screening in various tumor cells for anticancer effects showed a high degree of variability in cytotoxicity among receptors, which supported the proposed two-point binding mode. Several receptors potently disrupted cancer cell viability in breast cancer, prostate cancer, and acute myeloid leukemia cell lines.