Thermal properties of tetrahydroperparine derivatives

The thermal behaviour of tetrahydroperparine (THP) and its derivatives with various acids has been investigated. The acid is liberated from the formate derivative basically in two steps, while the other aliphatic acids are released quantitatively before the thermal decomposition of the THP molecule. The thermoanalytical curves, electrical conductivity data measured in the molten phase, and infrared spectra prove that while part of the formic acid is hydrogen-bonded the other part is bound ionically in the molecule. It may be assumed that the marked biological activity of the compound can be explained by this difference in the nature of the bonds.     

Influence of the chemical structure on the kinetics of the structural relaxation process of acrylate and methacrylate polymer networks

The enthalpy relaxation of poly(hydroxyethyl methacrylate) (PHEMA), poly(ethyl methacrylate) (PEMA) and poly(ethyl acrylate) (PEA) networks, obtained by DSC, are compared. The temperature interval of the glass transition broadens in the sequence PEA-PEMA-PHEMA. The plots of the enthalpy loss during the annealing for 200 min at different temperatures below T_g show that the structural relaxation process also takes place in PHEMA in a broader temperature interval than in PEA or PEMA. The modelling of the structural relaxation process using a phenomenological model allows determining the temperature dependence of the relaxation times concluding that the fragility in PHEMA is significantly lower than in PEMA. Both features are ascribed to the connectivity of the polymer chains in PHEMA via hydrogen bonding. The role of the presence of the methyl group bonded to the main chain is analysed by comparing the results obtained in PEA and PEMA.     

Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Infrared laser ablation study of pressed soil pellets with inductively coupled plasma atomic emission spectrometry

Potential of infrared laser ablation (LA) coupled with ICP-AES as a technique suitable for the determination of trace elements (Zn, Cu, Ni, Cr, and V) in agricultural soils was studied. Operating parameters such as laser beam energy, laser beam focusing with respect to the sample surface, and velocity of the sample translation in the plane perpendicular to the laser beam were optimized. Soil samples were mixed with powdered Ag as a binder, and an internal standard (GeO(2)), and pressed into pellets. Calibration samples were prepared by adding known amounts of oxides of elements of interest into soils of known elemental composition and then processed in the same way as the analyzed samples. Calibration curves were found to be linear at least up to several hundreds of mg kg(-1) for the elements of interest. The elemental contents obtained by using LA-ICP-AES were compared with those obtained by analysis using wet chemistry followed by ICP-AES with pneumatic nebulization (PN). The results were in good agreement. Accuracy was also tested using certified reference soils with a bias not exceeding 10% relative.     

Gas chromatographic method for studying the rate of photodegradation of some nitrogen-containing pesticides

Summary The photodegradation behaviour of 12 nitrogen-containing herbicides (atrazine, cyanazine, terbuthylazine, terbutryn, EPTC, buthylate, molinate, cycloate, vernolate, fenuron, chloroxuron, and methabenzthiazuron) has been examined. The compounds were degraded completely when exposed to a mercury-vapour lamp; the degradation process was followed by consecutive GC measurements. All the compounds studied had measurable photochemical activity, although actual and average degradation rates varied significantly. All the compounds except terbutryn furnished more than one major degradation product, in different ratios. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Primary Transformation Rate Measurements Through Differential Scanning Calorimetry

The primary crystallization of molten alloy systems at high undercooling is studied by a precise quantitative analysis of the calorimetric signal obtained during the transformation in terms of the reaction rate under isothermal and continuous heating regimes. It is shown that, under specific conditions, namely, stoechiometric primary precipitates, generalized relationships for the crystallization enthalpy and the reaction rate may be obtained.     

Product distributions, rate constants, and mechanisms of LiH+H reactions

We present a quantum-mechanical investigation of the LiH depletion reaction LiH+H-->Li+H2 and of the H exchange reaction LiH+H'-->LiH'+H. We report product distributions, rate constant, and mechanism of the former, and rate constant and mechanism of the latter reaction. We use the potential-energy surface by Dunne et al. [Chem. Phys. Lett. 336, 1 (2001)], the real-wave-packet method by Gray and Balint-Kurti [J. Chem. Phys. 108, 950 (1998)], and the J-shifting approximation. The 1H2 nuclear-spin statistics and progressions of vib-rotational states (v',j') rule both initial-state-resolved and thermal product distributions, which have saw-toothed shapes with odd j' preferred with respect to even j'. At high collision energies and temperatures, we obtain a regular 3-to-1 intensity alternation of rotational states. At low collision energies and temperatures, the degeneracy and density of many H2 levels can, however, give more irregular distributions. During the collision, the energy flows from the reactant translational mode to the product vibration and recoil ones. The rate constants of both reactions are not Arrhenius type because the reactions are barrier-less. The low-temperature, LiH depletion rate constant is larger than the H exchange one, whereas the contrary holds at high temperature. The real-time mechanisms show the nuclear rearrangements of the nonreactive channel and of the reactive ones, and point out that the LiH depletion is preferred over the H exchange at short times. This confirms the rate-constant results.     

Surface activity of thymol: implications for an eventual pharmacological activity

In the present work, we studied the ability of thymol to affect the organization of model membranes and the activity of an intrinsic membrane protein, the GABA(A) receptor (GABA(A)-R). In this last aspect, we tried to elucidate if the action mechanism of this terpene at the molecular level, involves its binding to the receptor protein, changes in the organization of the receptor molecular environment, or both. The self-aggregation of thymol in water with a critical micellar concentration approximately = 4 microM and its ability to penetrate in monomolecular layers of soybean phosphatidylcholine (sPC) at the air-water interface, even at surface pressures above the equilibrium, lateral pressure of natural bilayers were demonstrated. Thymol affected the self-aggregation of Triton X-100 and the topology of sPC vesicles. It also increased the polarity of the membrane environment sensed by the electrochromic dye merocyanine. A dipolar moment of 1.341 Debye was calculated from its energy-minimized structure. Its effect on the binding of [3H]-flunitrazepam ([3H]-FNZ) to chick brain synaptosomal membranes changed qualitatively from a tendency to the inhibition to a clear activatory regime, up on changing the phase state of the terpene (from a monomeric to a self-aggregated state). Above its CMC, thymol increased the affinity of the binding of [3H]-FNZ (K(d-control)= 2.9, K(d-thymol)= 1.7 nM) without changing the receptor density (B(max-control)= 910, B(max-thymol)= 895 fmol/mg protein). The activatory effect of thymol on the binding of [ [3H]-FNZ was observed even in the presence of the allosteric activator gamma-aminobutyric acid (GABA) at a concentration of maximal activity, and was blocked by the GABA antagonist bicuculline. Changes in the dipolar arrangement and in the molecular packing of GABA(A)-R environment are discussed as possible mediators of the action mechanism of thymol.     

Adsorptive stripping voltammetry of Tartrazine at the hanging mercury drop electrode in soft drinks

Adsorptive stripping voltammetry was used for the determination of trace amounts of the dye Tartrazine (E-102) by square-wave (SWS) and differential pulse techniques (DPS). Its adsorptive voltammetric behaviour was investigated at different pH media. NH₄Cl/NH₃ buffer solution was chosen as the most suitable, taking into account the sensitivity and definition of the reduction peaks obtained. The effects of the experimental parameters on the determination are discussed. Standard deviations of 3.3% and 2.6% were obtained by SWS and DPS for 100 and 50 μg/L Tartrazine solutions, respectively (n = 10). Both methods were applied to determine the dye in several commercial soft drinks, containing very small amounts of it. Measurements were made directly in the commercial samples. A comparison of the results obtained by the proposed voltammetric methods with those of an HPLC method was also made. Good correlations between the voltammetric results and the values supplied by the manufacturer were found, whereas recoveries of the same order of magnitude were obtained by the HPLC method. Received: 23 May 1996 / Revised: 5 July 1996 / Accepted: 10 July 1996