Separate evolution of H2 and O2 from H2O on visible light-responsive TiO2 thin film photocatalysts prepared by an RF magnetron sputtering method

Visible light-responsive TiO₂ thin film photocatalysts (Vis-TiO₂) have been prepared on Ti metal foil (Vis-TiO₂/Ti) or ITO glass (Vis-TiO₂/ITO) substrates by a radio-frequency magnetron sputtering (RF-MS) method. The UV–Vis spectra as well as photoelectrochemical performance of Vis-TiO₂ were affected by various calcination treatments such as calcination in air or NH₃. Calcination treatment in NH₃ (1.0 × 10⁴ Pa, 673 K) was particularly effective in increasing the visible light absorption of Vis-TiO₂ as well as in enhancing its photoelectrochemical performance and photocatalytic activity. A novel Vis-TiO₂ thin film photocatalyst (Vis-TiO₂/Ti/Pt) was prepared by an RF-MS method where Vis-TiO₂ was deposited on one side of a Ti metal foil substrate and nanoparticles of Pt were deposited on the other side. The separate evolution of H₂ and O₂ from H₂O could be successfully achieved by using an H-type glass cell consisting of two aqueous phases separated by Vis-TiO₂/Ti/Pt and a proton-exchange membrane. It was found that the rate of the separate evolution of H₂ and O₂ was also dramatically enhanced by calcination treatment of Vis-TiO₂ in NH₃.     

The O···H intramolecular hydrogen bond in 4‐X‐2‐hydroxybenzaldehydes: The relationships between geometrical parameters,estimated binding energies,and NMR data

The relationships among geometrical parameters, estimated binding energies, and nuclear magnetic resonance data in –C?O···H? O? intramolecular H‐bond of some substituted 2‐hydroxybenzaldehyde have theoretically been studied by B3LYP and MP2 methods with 6‐311++G** and AUG‐cc‐PVTZ basis sets. All substituents increase estimated hydrogen bond energies E_HBs (with the exception of NO₂ and C₂H₅), which are in good correlation with geometrical parameters, topological properties of electron density calculated at O···H bond critical points and ring critical points by using atoms in molecules method, the results of natural bond orbital analysis, and calculated nuclear magnetic resonance data. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Efficient highly diastereoselective synthesis of 1,8a-dihydro-7H-imidazo[2,1-b][1,3]oxazines

1-Alkyl imidazoles react smoothly with dialkyl acetylenedicarboxylates in the presence of pyridine carboxaldehydes to diastereoselectively produce 1,8a-dihydro-7H-imidazo[2,1-b][1,3]oxazine derivatives in excellent yields.     

Novel thin film nanocomposite membranes incorporated with polyoxovanadate nanocluster for high water flux and antibacterial properties

Using interfacial polymerization (IP) of m-phenylenediamine aqueous solution containing polyoxovanadate nanoclusters (POV) and trimesoyl chloride (TMC) in organic solution, we fabricated a novel polyamide (PA)- polyoxovanadate nanocluster (POV) nanocomposite membranes (PA-POV TFN). The chemical structures and morphologies of the synthesized membranes were characterized by Fourier transform infrared (FTIR) spectroscopy, atomic force microscope (AFM), scanning electron microscopy (SEM) and water contact angle measurements. Experimental results showed that the performances of PA-POV TFN membranes are remarkably dependent on POV incorporation in the membranes, which could be controlled by using different amounts of POV particles. Moreover, the PA-POV TFN membranes illustrated outstanding antibacterial properties against Gram-negative E. coli. On the other hand, the incorporation of various amounts of POV in the membranes improved the membrane separation performances (water flux and salt rejection) as well as the antibacterial activity in FO process as compared to the original thin-film composite (TFC) polyamide membrane.     

π-Stacking effects on acid capacity of p-aminobenzoic acid

Structural Chemistry - Acidity changes of p-aminobenzoic acid (pABA) after π-stacking with substituted benzenes (SB) have been investigated using quantum mechanical calculations at the...     

Efficient one-pot synthesis of novel 6′,9′-dihydro-2H,7′H-spiro[pyrimidine-5,8′-[1,3]dioxolo[4,5-f]quinoline]-2,4,6(1H,3H)-trione derivatives under mild and “green” reaction conditions

In this paper, an efficient method is introduced for the synthesis of 7′,9′-disubstituted 6′,9′-dihydro-2H,7′H-spiro[pyrimidine-5,8′-[1,3]dioxolo[4,5-f]quinoline]-2,4,6(1H,3H)-trione derivatives under mild and “green” reaction conditions. The method is based on one-pot multicomponent reaction of an aldehyde, barbituric acid, and benzo[d][1,3]dioxol-5-amine in ethanol as a green and environmentally friendly solvent. The reaction has given the products in the highest isolated yield in the presence of acetic acid as catalyst under reflux conditions. Various aldehydes, bearing electron-donating or -withdrawing functionalities have been used under the optimized conditions and successfully gave the desired products (13 examples) in high isolated yields.     

Application of 1,4-Diaminoanthraquinone as a New Sensing Material for Fabrication of a Iron(III)-Selective Modified Carbon Paste Electrode

In the present work, a novel sensitive electrochemical potentiometric sensor for sensing Fe³⁺ ions based on 1,4-diaminoanthraquinone (DAQ) as a hydrophobic selector element was prepared to implement as an ion selective carbon paste electrode in the aqueous solutions. The adequate amounts of ionophore (5%), paraffin oil (25%) as a binder, Nanosilica (NS: 0.5%) multi-wall carbon nanotubes (MWCNTs: 1%) as a modifier, and graphite powder (68.5%) as an inert matrix was occupied to form the paste. This new FeCP sensor demonstrated a Nernstian slope of 19.7 ± 0.7 mV per decade over widish linear range between 1.0 × 10^–8 to 1.0 × 10^–2 mol L^–1 at working pH range of 1.9–5.0 in the optimized conditions. The average elapsed time to response of electrode was about ~6 s for concentrations from lower (1.0 × 10^?8 mol L^–1) to higher (1.0 × 10^?2 mol L^–1) of Fe³⁺ ion solution. The selectivity of electrode toward Fe³⁺ ions in comparison with other cations was studied by matched potential method. The making FeCP sensor has been put to use successfully as an indicator electrode in analytical applications such as the potentiometric titration and determination of iron(III) ion in blend of different ions.     

Electrochemical Oxidation of Nortriptyline and Its Voltammetric Sensing at a Carbon Ionic Liquid Electrode

The electrochemical oxidation of nortriptyline at a carbon ionic liquid electrode (CILE) was investigated. Nortriptyline is electrochemically inactive on conventional electrodes but CILE exhibited excellent electrocatalytic activity toward oxidation of nortriptyline with the well-defined anodic peak at 860 mV. This characteristic was attributed to the outstanding conductivity and electrocatalytic effect of the ionic liquid, 1-octylpyridinum hexaflourophosphate, used as a binder in the construction of the electrode. The influence of experimental parameters such as pH and sweep rate was also studied. The quantitative determination of nortriptyline was performed using differential pulse voltammetry technique. Under selected conditions the anodic peak current was linear to nortriptyline concentration in the ranges of 4.8 × 10^–6 to 2.4 × 10^–5 M and 2.4 × 10^–5 to 6.4 × 10^–5 M, with correlation coefficients of 0.9992 and 09949, respectively. The detection limit was 3 × 10^–7 M.     

Arrangement and nature of intermolecular hydrogen bonding in complex biomolecular systems: modeling the vitamin C---L-alanine interaction

Vitamin C is known as an essential dietary supplement and implicated in diverse biological processes. We present here a theoretical study on the nature of hydrogen bonding of vitamin C in biological systems. For this reason, the complexes of vitamin C (VC) with neutral and zwitterionic L-alanine (as the simplest chiral amino acid) were studied at the MP2/6-311++G(d,p) level of theory. In the gas phase, neutral L-alanine leads to more stable complexes than the zwitterionic forms while the reverse is true in the aqueous phase. The complexes are formed via two hydrogen bond interactions, which result in a ring-like hydrogen-bonded networks. The nature of H-bonds was characterized in terms of natural bond orbital and quantum theory of atoms in molecule analyses (QTAIM). The H-bonds in the studied complexes were electrostatic in nature; however, in the case of shorter and directional H-bonds and ionic interactions, contributions of covalent character were also non-negligible. Natural energy decomposition analysis of hydrogen-bonded complexes reveals that the charge transfer and electrical components are the largest contributors for the interaction energies of complexes. Natural resonance theory analysis suggests higher resonance weight for charge-assisted interactions of vitamin C---alanine (zwitterionic) complexes, where the total interaction energy is considerably higher than that of neutral alanine.     

Dye-sensitized solar cells based on Fe N-heterocyclic carbene photosensitizers with improved rod-like push-pull functionality

A new generation of octahedral iron(ii)–N-heterocyclic carbene (NHC) complexes, employing different tridentate C^N^C ligands, has been designed and synthesized as earth-abundant photosensitizers for dye sensitized solar cells (DSSCs) and related solar energy conversion applications. This work introduces a linearly aligned push–pull design principle that reaches from the ligand having nitrogen-based electron donors, over the Fe(ii) centre, to the ligand having an electron withdrawing carboxylic acid anchor group. A combination of spectroscopy, electrochemistry, and quantum chemical calculations demonstrate the improved molecular excited state properties in terms of a broader absorption spectrum compared to the reference complex, as well as directional charge-transfer displacement of the lowest excited state towards the semiconductor substrate in accordance with the push–pull design. Prototype DSSCs based on one of the new Fe NHC photosensitizers demonstrate a power conversion efficiency exceeding 1% already for a basic DSSC set-up using only the I⁻/I₃⁻ redox mediator and standard operating conditions, outcompeting the corresponding DSSC based on the homoleptic reference complex. Transient photovoltage measurements confirmed that adding the co-sensitizer chenodeoxycholic acid helped in improving the efficiency by increasing the electron lifetime in TiO₂. Time-resolved spectroscopy revealed spectral signatures for successful ultrafast (<100 fs) interfacial electron injection from the heteroleptic dyes to TiO₂. However, an ultrafast recombination process results in undesirable fast charge recombination from TiO₂ back to the oxidized dye, leaving only 5–10% of the initially excited dyes available to contribute to a current in the DSSC. On slower timescales, time-resolved spectroscopy also found that the recombination dynamics (longer than 40 μs) were significantly slower than the regeneration of the oxidized dye by the redox mediator (6–8 μs). Therefore it is the ultrafast recombination down to fs-timescales, between the oxidized dye and the injected electron, that remains as one of the main bottlenecks to be targeted for achieving further improved solar energy conversion efficiencies in future work.

Iron-based photosensitizers for dye-sensitized solar cells with a rod-like push–pull design. Solar cell performance was limited by ultrafast (sub-ps) recombination, but yielded better performance than the homoleptic parent photosensitizer.