Spectral Properties and Solubilization Location of 2'-Ethylhexyl 4-(N,N-Dimethylamino)benzoate in Micelles

在阳离子、非离子和阴离子表面活性剂胶束溶液中,研究了4-(N,N-二甲氨基)苯甲酸2'-乙基己基酯(EHDMAB)的双重荧光和紫外吸收．当EHDMAB增溶在不同的胶束溶液中,紫外吸收增强,在离子型胶束溶液中,可观察到具有较长波长的EHDMAB分子内扭转电荷转移(TICT)荧光,相反,在非离子型胶束溶液中,可观察到具有较短波长TICT荧光,特别是位于阳离子胶束Stern层中的吡啶阳离子可强烈猝灭EHDMAB分子的双重荧光,所吸收的紫外辐射主要通过TICT荧光和非辐射去活化衰减．按照EHDMAB分子TICT荧光在有机溶剂中的极性依赖性,EHDMAB分子的4-(N,N-二甲氨基)在离子型胶束和非离子型胶束中处于不同的极性环境;根据EHDMAB和表面活性剂分子的结构和大小分析,EHDMAB分子的4-(N,N-二甲氨基)应朝向胶束的极性头基团,而2'-乙基己基链则朝向疏水性的胶束内核．动态荧光猝灭测量为EHDMAB分子在不同胶束中的位置进一步提供了佐证．     

Ultrasonic depolymerization of aqueous polyvinyl alcohol.

Ultrasonication has proved to be a highly advantageous method for depolymerizing macromolecules because it reduces their molecular weight simply by splitting the most susceptible chemical bond without causing any changes in the chemical nature of the polymer. Most of the effects involved in controlling molecular weight can be attributed to the large shear gradients and shock waves generated around collapsing cavitation bubbles. In general, for any polymer degradation process to become acceptable to industry, it is necessary to be able to specify the sonication conditions which lead to a particular relative molar mass distribution. This necessitates the identification of the appropriate irradiation power, temperature, concentration and irradiation time. According to the results of this study the reactors constructed worked well in depolymerization and it was possible to degrade aqueous polyvinyl alcohol (PVA) polymer with ultrasound. The most extensive degradation took place at the lowest frequency used in this study, i.e. 23 kHz, when the input power was above the cavitation threshold and at the lowest test concentration of PVA, i.e. 1% (w/w). Thus this study confirms the general assumption that the shear forces generated by the rapid motion of the solvent following cavitational collapse are responsible for the breakage of the chemical bonds within the polymer. The effect of polymer concentration can be interpreted in terms of the increase in viscosity with concentration, causing the molecules to become less mobile in solution and the velocity gradients around the collapsing bubbles to therefore become smaller.     

Studies on adhesion characteristics and corrosion behaviour of vinyltriethoxysilane/epoxy coating protective system on aluminium

The corrosion stability of vinyltriethoxysilane/epoxy coating protective system on aluminium is strongly related to the strength of bonds forming at the metal/organic coating interface. This article is a study of adhesion, composition, electrochemical and transport properties of epoxy coatings electrodeposited on bare aluminium and aluminium pretreated by vinyltriethoxysilane (VTES) during exposure to 3% NaCl. The VTES film was deposited on aluminium surface from 2% vinyltriethoxysilane solution during 30 s. From the values of adhesion strength (pull-off test), time dependence of pore resistance and coating capacitance of epoxy coating (impedance measurements) and diffusion coefficient of water through epoxy coating (gravimetric liquid sorption measurements), the influence of VTES sublayer on the corrosion stability of the electrodeposited epoxy coating was shown.The work discusses the role of the VTES pretreatment in the enhanced adhesion and corrosion stability of epoxy cataphoretic coating. The electrochemical results showed that the aluminium pretreatment by VTES film improved barrier properties of epoxy coating (greater pore resistance and lower coating capacitance). The lower value of diffusion coefficient of water through epoxy coating indicates the lower porosity, while the smaller adhesion reduction points to better adhesion of epoxy coating on aluminium pretreated by VTES film. The composition of the deposited coatings investigated by XPS enabled the clarification of the bonding mechanism.     

Modeling the interaction of solitary waves and semi-circular breakwaters by using unsteady reynolds equations

A vertical 2 -D numerical wave model was developed based on unsteady Reynolds equations. In this model, the k-epsilon models were used to close the Reynolds equations, and volume of fluid( VOF) method was used to reconstruct the free surface. The model was verified by experimental data. Then the model was used to simulate solitary wave interaction with submerged, alternative submerged and emerged semi-circular breakwaters. The process of velocity field, pressure field and the wave surface near the breakwaters was obtained. It is found that when the semi-circular breakwater is submerged, a large vortex will be generated at the bottom of the lee side wall of the breakwater ; when the still water depth is equal to the radius of the semi-circular breakwater, a pair of large vortices will be generated near the shoreward wall of the semi-circular breakwater due to wave impacting, but the velocity near the bottom of the lee side wall of the breakwater is always relatively small. When the semi-circular breakwater is emerged, and solitary wave cannot overtop it, the solitary wave surface will run up and down secondarily during reflecting from the breakwater. It can be further used to estate the diffusing and transportation of the contamination and transportation of suspended sediment.     

Meshing Requirements for Tidal Modeling in the Western North Atlantic

This paper presents an a posteriori approach to unstructured mesh generation via a localized truncation error analysis and applies it to the Western North Atlantic Tidal (WNAT) model domain. The WNAT model domain encompasses the Gulf of Mexico, the Caribbean Sea, and the North Atlantic Ocean east to the 60°W Meridian. Herein, we pay particular attention to the area surrounding the Bahamas.

A bathymetric data set with fine resolution is employed in seven separate linear, harmonic simulations of shallow water tidal flow for seven different tidal-forcing constituents. Each set of simulation results is used to perform a truncation error analysis of a linear, harmonic form of the depth-averaged momentum equations for each of the seven different tidal-forcing frequencies. Truncation error is then driven to a more uniform, domain-wide value by solving for local node spacing requirements. The process is built upon successful research aiming to produce unstructured grids for large-scale domains that can be used in the accurate and efficient modeling of shallow water flow. The methodology described herein can also be transferred to other modeling applications.     

Solvent Reorganization Energy and Electronic Coupling for Intramolecular Electron Transfer in Biphenyl-Acceptor Anion Radicals

基于非平衡溶剂化理论和连续介质模型修改了GAMESS中的相关程序,实现了电子转移溶剂重组能的数值计算. 采用修改后的程序计算得到了联苯-雄甾烷-萘和联苯-雄甾烷-菲这两个体系电子转移的溶剂重组能约为60 kJ/mol. 这个结果与实验拟合值符合的很好. 利用线性反应坐标与Koopmans定理计算了电子转移耦合矩阵元,结果与实验拟合值有可比性.     

A facile protocol for the preparation of 5-alkylidene and 5-imino substituted hydantoins from N,N′-disubstituted parabanic acids

A convenient procedure for the preparation of various substituted (thio)hydantoins is described. The method is based on Wittig and aza-Wittig reactions of parabanic acids with phosphonium ylides. The reactions occurred both regio- and stereo-selectively.     

Synthesis and some properties of a new compound in the Al–Sb–V–O system

A new compound in the Al?CSb?CV?CO system of the composition AlSbVO₆ was successfully synthesized by a solid-state reaction and characterized by powder XRD diffraction. The structural and thermal properties of AlSbVO₆ were investigated. The infra-red spectrum of the new phase is presented.