Electrophoresis on a microfluidic chip for analysis of fluorescence-labeled human rhinovirus

We report the analysis of human rhinovirus serotype 2 (HRV2) on a commercially available lab-on-a-chip instrument. Due to lack of sufficient native fluorescence, the proteinaceous capsid of HRV2 was labeled with Cy5 for detection by the red laser (lambda ex 630 nm) implemented in the instrument. On the microdevice, electrophoresis of the labeled virus was possible in a BGE without stabilizing detergents, which is in contrast to conventional CE; moreover, analysis times were drastically shortened to the few 10 s range. Resolution of the sample constituents (virions, a contaminant present in all virus preparations, and excess dye) was improved upon adaptation of the separation conditions, mainly by adjusting the SDS concentration of the BGE. Purity of fractions from size-exclusion chromatography after labeling of virus was assessed, and affinity complex formation of the labeled virus with various recombinant very-low-density lipoprotein receptor derivatives differing in the number of concatenated V3 ligand binding repeats was monitored. Virus analysis on microchip devices is of particular interest for experiments with infectious material because of easy containment and disposal of samples. Thus, the employment of microchip devices in routine analysis of viruses appears to be exceptionally attractive.     

Safer Pyrotechnic Obscurants Based on Phosphorus(V) Nitride

The potential of phosphorus(V) nitride, P₃N₅ , as a replacement for red phosphorus, P_R, in pyrotechnic obscurants has been theoretically and experimentally investigated. P₃N₅ can be safely mixed with KNO₃ and even KClO₃ and KClO₄ . The corresponding formulations are surprisingly insensitive to friction and only mildly impact‐sensitive. P₃N₅ /KNO₃ pyrolants with ξ=20–80 wt % P₃N₅ burn 200 times faster than the corresponding mixtures based on P_R and generate a dense smoke. Hence obscurants based on P₃N₅ /KNO₃ have a figure of merit that by far exceeds that of current state‐of‐the‐art P_R‐based obscurants. Furthermore, unlike P_R, which slowly degrades in moist air to phosphoric acids and phosphine (PH₃), P₃N₅ is stable under these conditions and does not produce any acids or PH₃ . P₃N₅ is hence a safe, stable, and powerful replacement for P_R for use in insensitive munitions.     

Hybrid bioelectrocatalyst for hydrogen peroxide reduction: immobilization of enzyme within organic-inorganic film of structured Prussian Blue and PEDOT

Fabrication of structured film (on glassy carbon substrate) composed of compact Prussian Blue (that has been prepared by alternate immersions and through assembling within ultra-thin layers of 4(pyrrole-1-yl)-benzoic acid, PPyBA) and poly(3,4-ethylendioxythiophene), PEDOT, is described. This functionalized film has been characterized by fast charge propagation, and it has served as a redox conducting template for permanent attachment of a model enzyme, horseradish peroxidase, HRP. The resulting organic-inorganic system acts as an effective hybrid bioelectrocatalyst for electroreduction of hydrogen peroxide, a model reactant for biosensors and biofuel cells. Among important issues are rigidity, permanence of enzyme attachment, morphology, hydrophilicity, and attractive mediating capabilities of the PEDOT-stabilized Prussian Blue based structured film.     

pH sensitivity of Si--C linked organic monolayers on crystalline silicon surfaces.

The electrochemical behavior of Si--C linked organic monolayers is studied in electrolyte-insulator-Si devices, under conditions normally encountered in potentiometric biosensors, to gain fundamental knowledge on the behavior of such Si electrodes under practical conditions. This is done via titration experiments, Mott-Schottky data analysis, and data fitting using a site-binding model. The results are compared with those of native SiO(2) layers and native SiO(2) layers modified with hexamethyldisilazane. All samples display pH sensitivity. The number of Si--OH groups on the alkylated samples is calculated to be less than 0.7 % of that of a pure SiO(2) insulator, which still causes a pH sensitivity of approximately 25 mV per pH unit in the pH range: 4-7. The alkylated samples hardly suffer from response changes during up- and down-going titrations, which indicates that very little oxide is additionally formed during the measurements. The pK(a) values of all samples with monolayers (4.0-4.4) are lower than that of native SiO(2) (6.0). The long-term drift (of approximately 1 mV h(-1)) is moderate. The results indicate that biosensors composed of alkylated Si substrates are feasible if a cross-sensitivity towards pH in the sensor signal is taken into account.     

One barbiturate and two solvated thiobarbiturates containing the triply hydrogen‐bonded ADA/DAD synthon,plus one ansolvate and three solvates of their coformer 2,4‐diaminopyrimidine

A path to new synthons for application in crystal engineering is the replacement of a strong hydrogen‐bond acceptor, like a C=O group, with a weaker acceptor, like a C=S group, in doubly or triply hydrogen‐bonded synthons. For instance, if the C=O group at the 2‐position of barbituric acid is changed into a C=S group, 2‐thiobarbituric acid is obtained. Each of the compounds comprises two ADA hydrogen‐bonding sites (D = donor and A = acceptor). We report the results of cocrystallization experiments of barbituric acid and 2‐thiobarbituric acid, respectively, with 2,4‐diaminopyrimidine, which contains a complementary DAD hydrogen‐bonding site and is therefore capable of forming an ADA/DAD synthon with barbituric acid and 2‐thiobarbituric acid. In addition, pure 2,4‐diaminopyrimidine was crystallized in order to study its preferred hydrogen‐bonding motifs. The experiments yielded one ansolvate of 2,4‐diaminopyrimidine (pyrimidine‐2,4‐diamine, DAPY), C₄H₆N₄, (I), three solvates of DAPY, namely 2,4‐diaminopyrimidine–1,4‐dioxane (2/1), 2C₄H₆N₄·C₄H₈O₂, (II), 2,4‐diaminopyrimidine–N,N‐dimethylacetamide (1/1), C₄H₆N₄·C₄H₉NO, (III), and 2,4‐diaminopyrimidine–1‐methylpyrrolidin‐2‐one (1/1), C₄H₆N₄·C₅H₉NO, (IV), one salt of barbituric acid, viz. 2,4‐diaminopyrimidinium barbiturate (barbiturate is 2,4,6‐trioxopyrimidin‐5‐ide), C₄H₇N₄⁺·C₄H₃N₂O₃⁻, (V), and two solvated salts of 2‐thiobarbituric acid, viz. 2,4‐diaminopyrimidinium 2‐thiobarbiturate–N,N‐dimethylformamide (1/2) (2‐thiobarbiturate is 4,6‐dioxo‐2‐sulfanylidenepyrimidin‐5‐ide), C₄H₇N₄⁺·C₄H₃N₂O₂S⁻·2C₃H₇NO, (VI), and 2,4‐diaminopyrimidinium 2‐thiobarbiturate–N,N‐dimethylacetamide (1/2), C₄H₇N₄⁺·C₄H₃N₂O₂S⁻·2C₄H₉NO, (VII). The ADA/DAD synthon was succesfully formed in the salt of barbituric acid, i.e. (V), as well as in the salts of 2‐thiobarbituric acid, i.e. (VI) and (VII). In the crystal structures of 2,4‐diaminopyrimidine, i.e. (I)–(IV), R₂²(8) N—H…N hydrogen‐bond motifs are preferred and, in two structures, additional R₃²(8) patterns were observed.     

Cluster chemistry: XXXVIII. Reactions between M(C2R)(PR′3 (M = Cu,Ag, Au; R = Ph,C6F5; R′ = Me Ph) and H2Os3(CO)10: X-ray structures of Os3Au(μ-CHCHR)(CO)10(PPh3) (R = Ph and C6F5)

The reactions of Os₃(μ-H)₂(CO)₁₀ with a series of Group IB metal acetylide-tertiary phosphine complexes are described. Whereas the compounds M(C₂C₆F₅)(PPh₃) (M = Cu, Ag, Au) afforded the complexes MOs₃(μ-CHCHC₆F₅)(CO)₁₀(PPh₃) cleanly and in high yield, complex mixtures of products were obtained from reactions of the analogous phenylacetylides. The complexes MOs₃(μ-CHCHPh)(CO)₁₀(PPh₃), MOs₃(μ-CHCHPh)(CO)₉(PPh₃)₂ and MOs₃(μ-H)(CO)₁₀(PPh₃) (of known structure), and MOs₃(μ-CHCHPh)(CO)₉(PPh₃)₂ and HMOs₃(CHCPh)(CO)₈ (of unknown structure) were characterised; Au(C₂Ph)(PMe₃) afforded similar derivatives. The reactions proceed by oxidative-addition and hydrogen migration steps; MP bond cleavage reactions also occur to a small extent. The molecular structures of AuOs₃(μ-CHCHC₆R₅)(CO)₁₀(PPh₃) (R = F or H) were determined by X-ray analyses. For R = F, crystals are triclinic, space group P$\text{1}$ with a 9.081(2), b 13.291(2), c 17.419(2) Å, α 84.49(1), β 76.20(2), γ 75.81(2)° and Z = 2; 4622 observed data [I > 2.5σ(I)] were refined to R = 0.027, R_W = 0.031. For R = H, crystals are triclinic, space group P$\text{1}$, with a 9.403(4), b 13.448(3), c 13.774(4) Å, α 83.34(2), β 88.66(3), γ 70.21(3)°, and Z = 2; 4405 observed data [I > 2.5σ(I)] were refined to R = 0.030, R_W = 0.033. The two molecules differ in the orientation of the Ph rings of the PPh₃ groups, but are otherwise similar to Os₃(μ-H)(μ-CHCHBu^t)(CO)₁₀ with the μ-H ligand replaced by the isolobal μ-Au(PPh₃) group.     

Single- and multi-channel detection for generalized quantitative analysis in cases of unresolved chromatographic peaks

Computerized quantification of components under overlapping chromatographic peaks is done by calibration of chromatograms against component mixtures. For conventional (single-channel) detectors, the limitations of earlier methods based on ordinary multiple regression, can be circumvented by data reduction with the aid of principal component analysis with the partial least-squares approach. Simulation studies show that the method can be applied even when there is severe peak overlap, unstable baseline, noisy chromatograms or non-linear detector response. Advantages in the quantification of fused peaks by means of multichannel detectors are outlined. Present limitations on the quantitative evaluation of several overlapping component peaks from a single spectro-chromatogram by means of the partial least-squares method combined with multiple regression on the pure component spectra, are discussed with respect to practical high-performance liquid chromatography.     

Synthese und Reaktionen von Bicyclo[6.4.0]dodecan-3-carbonsäure-Derivaten

Synthesis and Reactions of the Bicyclo[6.4.0]dodecane-3-carboxylic Acid Derivatives The synthesis and some consecutive reactions of the compounds 5-8 , derivatives of bicyclo[6.4.0]dodecane-3-carboxylic acid ( 1 ), are described. The esters 7 and 8 can be obtained by Baeyer-Villiger oxidation of 2-hydroxy-8-methyltricyclo[7.3.1.0^2,7]tridecan-13-one ( 4 ) and subsequent hydrolysis of the lactone 5 . The structure and configuration of these compounds has been evaluated by spectroscopic techniques (mainly 2D-NMR methods). The formation of 7 via 1,2-H shift and subsequent isomerization to 8 has been studied. The esters 11 and 13 are formed stereospecifically from 7 and 8 .     

Structure and Reactivity of Xanthocorrinoids. Part III. The first example of a pinacol-type rearrangement in the corrin series

The transformation of the c-acetic-acid chain of hexamethyl Coα, Coβ-dicyanocobyrinate into an ethyl group (→ 2 ) as well as the synthesis of the pentadecaalkyl-cobalticorrin 6d from commercial cyanocobalamin are described. On reaction of 2 or 6d with O₂ in the presence of ascorbic acid, migration of the CH₃ group at C(5) to the vicinal position C(6) takes place concomitantly with the introduction of a carbonyl group at C(5).