Nachweis von Farbstoffen auf alten Textilien

A simple method of identifying the more important natural dyes that have found widespread use for dyeing textiles is described. This involves thin-layer chromatographic comparison on Mikropolyamid F 1700 (Schl. & Sch.). The reliability of dye recognition is increased by combining various methods of identification on the chromatogram by employing the following procedure: (1) The normal coloration, (2) the fluorescent colour in UV light, (3) the change in shade with ammoniacal steam, and (4) the colour reaction with aluminium salts or, where hydroxyflavones have already been identified by reaction (3), with iron(III) chloride. In addition, various specific reactions for identifying individual natural colours are given. Furthermore, methods are indicated whereby identification can be effected by comparing infra-red spectra after a simple preparation of the sample.     

New membrane materials for potassium-selective ion-sensitive field-effect transistors

Several polymeric materials were studied as membrane materials for potassium-selective ion-sensitive field-effect transistors (ISFETs) to overcome the problems related with the use of conventional plasticized poly(vinyl chloride) membranes casted on ISFET gate surfaces. Several acrylate materials, such as ACE, Epocryl and derivatives, showed no reproducible results. Three room-temperature vulcanizing (RTV)-type silicone rubbers were tested. The addition-type RTV-2 silicone rubber was not suitable as a membrane material, but the condensation-type RTV-1 and especially the RTV-2 silicone rubber showed good results. ISFETs with a Silopren membrane showed a durability of at least 2 months.     

Analytical quality control by solid sampling GFAAS in the production of animal tissue reference materials: lead and cadmium in bovine liver reference materials

Summary The function of solid sampling graphite furnace atomic absorption spectrometry (SS-GFAAS) in the laboratory-internal preparation, production and standardization of bovine liver reference material is described. Analytical quality assurance was achieved by using a wet digestion decomposition procedure and GFAAS (WD-GFAAS) as well as three different methods of SS-GFAAS. It will be shown, that SS-GFAAS is an adequate and efficacious method of analytical quality control in the production of reference materials. Details are given about the preliminary steps of sample selection and preparation, applying SS-GFAAS both as a screening method and for the detection of contamination during the production of the reference materials. The element contents of the four bovine liver materials measured after decomposition with nitric acid in the open system by GFAAS and also by Flame-AAS, using the slotted tube atom trap, are compared statistically with the results obtained by SS-GFAAS. In solid sampling analyses three different systems were applied: a solid sampling ZAA-spectrometer with platform-boat, a D₂AA-spectrometer with solid sampling graphite tube and platform-drawer and an autoprobe-D₂AA-spectrometer with solid sampling autoprobe and graphite tube.     

Heteronuclear solid-state correlation spectroscopy

Two-dimensional NMR methods are proposed for correlating the spectra of abundant and dilute spins in solids. The techniques simplify assignment and permit determination of shielding tensors even when extensive overlaps occur. Spin diffusion among abundant spins can be observed indirectly.     

Definitive Proof for the Operation of Isotopically Sensitive Branching (‘Metabolic Switching’) in FeI-Mediated C?H Bond Activation in the Gas Phase Short Communication

Rigorous regio- and stereospecific labeling experiments are performed to demonstrate the operation of the previously suggested operation of ‘isotopically sensitive branching’ in Fe^I-mediated C? H bond activation. For the hexane-1,6-diol/Fe⁺-complex, it is shown that dehydrogenation involves specifically the central C(3)/C(4) position, and the study of the stereospecifically labeled D ,L - and meso-[3,4-D₂]-isotompomers 1e and 1f demonstrates that dehydrogenation proceedes via two competing pathways (i.e. ‘anti’- vs. ‘syn’-route). The contribution of these routes to the product formation is – due to a kinetic isotope effect – controlled by the relative configuration at the labeled positions C(3)/C(4). For the D ,L -form 1e , we estimate a ratio of 49:1 in favor of the ‘anti’-route; due to an isotope effect, this ratio drops to 4.3:1 for the meso-form 1f .     

Synthesis and polymerizability of 7,8-dicyano-7,8-diphenylquinodimethane

7,8-Dicyano-7,8-diphenylquinodimethane (DCDPQ) was prepared by oxidation of the dianion of α,α′-dicyano-α,α′-diphenylxylene. ¹H-NMR of a solution of the purified compound showed that the cis and trans isomers were present in a 1:1 ratio. Following further spectroscopic and electronic characterization the polymerizability of the title compound was investigated. DCDPQ did not homopolymerize at 65°C in the presence of AIBN. DCDPQ copolymerized with p-methoxystyrene and p-aminostyrene in the presence of AIBN at 65°C. Characterization of the latter two copolymers indicated that they were nearly alternating. The copolymerization between DCDPQ and p-aminostyrene proceeded in the absence of AIBN.     

Theory of chirality functions,generalized for molecules with chiral ligands

The theory of chirality functions described in a previous publication is generalized to allow for chiral ligands. In the earlier theory, all symmetry operations of the molecular frame could be thought of as permutations of the ligands among the sites; in the present work, improper rotations not only permute the ligands, but convert them into mirror images. The group that generates all isomers from a given ordered molecule belonging to a frame with n sites is now the hyperoctahedral group of order 2ⁿ n! consisting of all possible combinations of permutations and site reflections. The representation theory of these groups is described, and applied to the problem of constructing qualitatively complete chirality functions, and of deciding which ligand partitions, and which isomer mixtures, are chiral. It is found useful to classify chiral representations of the covering group as ligand specific and class specific. The ligand specific representations describe chiral properties which are common to all frames and arise purely from the chirality of the ligands, while the class specific representations describe the chiral properties of the frame. A number of examples are explicitly worked out.     

Synthesen von Xyluron- und Riburonsäurederivaten

Zusammenfassung Durch acylierende Dehydratisierung von 1,2-Isopropyliden-d-xylo-und-d-ribo-pentodialdo-furanoseoxim bzw. aus Furanuronsäureestern und-amiden werden über eine Reihe von Zwischenstufen verschiedene 3-O-Acyl-pentofuranuronsäurenitrile synthetisiert und deren Reaktionen untersucht.

---

Synthesis of xyluronic and riburonic acid derivatives

Various 3-O-acyl-pentofuranurononitrils were synthesized by acylating dehydration of 1,2-isopropylidene-d-xylo- andd-ribo-pentodialdo-furanose oximes, or pentofuranuronic acids via intermediates. Their reactions were investigated.

---

---

Mit 1 Abbildung

---

Aus den DissertationenH. W. Oberwalder (1970) undE. Wildschek (1967), Technische Hochschule in Graz.     

Amperometric determination of hydrogen peroxide with a manganese dioxide film-modified screen printed carbon electrode

A carbon thick film electrode modified with an MnO₂-film is investigated as an amperometric detector for hydrogen peroxide in flow-injection analysis (FIA). At an operating potential of +0.48 V vs. Ag/AgCl catalytic oxidation of the analyte is exploited for amperometric monitoring. Experimental parameters, such as pH of the carrier, working potential, flow rate and injection volume, are optimized. The amperometric signals are linearly proportional to the concentration of H₂O₂ in the range from 0.005 to 10 mg/L, showing a detection limit (3σ) of 2.3 μg/L. The method is applied to the determination of H₂O₂ in rain water and to a simple assay to quantify glucose in human plasma.