Synthesis of carboxyl cellulose sulfates with regioselective sulfation and regiospecific oxidation using cellulose trifluoroacetate as intermediates

Synthesis of cellulose sulfates (CSs) and carboxyl cellulose sulfates (COCSs) with regioselectively or regiospecifically distributed functional groups within anhydroglucose units was reported. CS with regioselectively distributed sulfate groups at 2,3-O- or 2,6-O-position were homogeneously synthesized and cellulose trifluoroacetate (CTFA) was used as intermediates. The trifluoroacetyl groups were detected primarily at 6-O-position and their distributions could be altered by changing the amount of trifluoroacetyl anhydride (TFAA). Various sulfating agents were used for further homogeneous sulfation of CTFA. The total degree of sulfation (DS_S) and the distribution of sulfate groups within the repeating units were affected by the amount of TFAA, the type and amount of sulfating agents. Subsequent homogenous 4-acetamide-TEMPO or TEMPO-mediated oxidation of CS led to COCS with carboxyl groups regiospecifically distributed at C6 position, which may be interesting structural mimics for natural occurring heparin.     

Simultaneous high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS-MS) analysis of cyanide and thiocyanate from swine plasma

An analytical procedure for the simultaneous determination of cyanide and thiocyanate in swine plasma was developed and validated. Cyanide and thiocyanate were simultaneously analyzed by high-performance liquid chromatography tandem mass spectrometry in negative ionization mode after rapid and simple sample preparation. Isotopically labeled internal standards, Na¹³C¹⁵N and NaS¹³C¹⁵N, were mixed with swine plasma (spiked and nonspiked), proteins were precipitated with acetone, the samples were centrifuged, and the supernatant was removed and dried. The dried samples were reconstituted in 10 mM ammonium formate. Cyanide was reacted with naphthalene-2,3-dicarboxaldehyde and taurine to form N-substituted 1-cyano[f]benzoisoindole, while thiocyanate was chemically modified with monobromobimane to form an SCN-bimane product. The method produced dynamic ranges of 0.1–50 and 0.2–50 μM for cyanide and thiocyanate, respectively, with limits of detection of 10 nM for cyanide and 50 nM for thiocyanate. For quality control standards, the precision, as measured by percent relative standard deviation, was below 8 %, and the accuracy was within ±10 % of the nominal concentration. Following validation, the analytical procedure successfully detected cyanide and thiocyanate simultaneously from the plasma of cyanide-exposed swine.     

Overcoming Symmetry Mismatch in Vaccine Nanoassembly through Spontaneous Amidation

Matching of symmetry at interfaces is a fundamental obstacle in molecular assembly. Virus‐like particles (VLPs) are important vaccine platforms against pathogenic threats, including Covid‐19. However, symmetry mismatch can prohibit vaccine nanoassembly. We established an approach for coupling VLPs to diverse antigen symmetries. SpyCatcher003 enabled efficient VLP conjugation and extreme thermal resilience. Many people had pre‐existing antibodies to SpyTag:SpyCatcher but less to the 003 variants. We coupled the computer‐designed VLP not only to monomers (SARS‐CoV‐2) but also to cyclic dimers (Newcastle disease, Lyme disease), trimers (influenza hemagglutinins), and tetramers (influenza neuraminidases). Even an antigen with dihedral symmetry could be displayed. For the global challenge of influenza, SpyTag‐mediated display of trimer and tetramer antigens strongly induced neutralizing antibodies. SpyCatcher003 conjugation enables nanodisplay of diverse symmetries towards generation of potent vaccines.     

Controlling the early stages of pentacene growth by supersonic molecular beam deposition

The key role of the pentacene kinetic energy (Ek) in the early stages of growth on SiOx/Si is demonstrated: islands with smooth borders and increased coalescence differ remarkably from fractal-like thermal growth. Increasing Ek to 6.4 eV, the morphology evolves towards higher density of smaller islands. At higher coverage, coalescence grows with Ek up to a much more uniform, less defected monolayer. The growth, interpreted by the diffusion mediated model, shows the critical nucleus changing from 3 to 2 pentacene for Ek>5-6 eV. Optimal conditions to produce single crystalline films are envisaged.     

Network formation of tissue cells via preferential attraction to elongated structures

Vascular and nonvascular cells often form an interconnected network in vitro, similar to the early vascular bed of warm-blooded embryos. Our time-lapse recordings show that the network forms by extending sprouts, i.e., multicellular linear segments. To explain the emergence of such structures, we propose a simple model of preferential attraction to stretched cells. Numerical simulations reveal that the model evolves into a quasistationary pattern containing linear segments, which interconnect above the critical volume fraction of 0.2. In the quasistationary state, the generation of new branches offset the coarsening driven by surface tension. In agreement with empirical data, the characteristic size of the resulting polygonal pattern is density-independent within a wide range of volume fractions.     

Upgrade of beamline BL08B at Taiwan Light Source from a photon‐BPM to a double‐grating SGM beamline

During the last 20 years, beamline BL08B has been upgraded step by step from a photon beam‐position monitor (BPM) to a testing beamline and a single‐grating beamline that enables experiments to record X‐ray photo‐emission spectra (XPS) and X‐ray absorption spectra (XAS) for research in solar physics, organic semiconductor materials and spinel oxides, with soft X‐ray photon energies in the range 300–1000 eV. Demands for photon energy to extend to the extreme ultraviolet region for applications in nano‐fabrication and topological thin films are increasing. The basic spherical‐grating monochromator beamline was again upgraded by adding a second grating that delivers photons of energy from 80 to 420 eV. Four end‐stations were designed for experiments with XPS, XAS, interstellar photoprocess systems (IPS) and extreme‐ultraviolet lithography (EUVL) in the scheduled beam time. The data from these experiments show a large count rate in core levels probed and excellent statistics on background normalization in the L‐edge adsorption spectrum.     

Optimum step-stress accelerated degradation test for Wiener degradation process under constraints

To assess a product's reliability for subsequent managerial decisions such as designing an extended warranty policy and developing a maintenance schedule, Accelerated Degradation Test (ADT) has been used to obtain reliability information in a timely manner. In particular, Step-Stress ADT (SSADT) is one of the most commonly used stress loadings for shortening test duration and reducing the required sample size. Although it was demonstrated in many previous studies that the optimum SSADT plan is actually a simple SSADT plan using only two stress levels, most of these results were obtained numerically on a case-by-case basis. In this paper, we formally prove that, under the Wiener degradation model with a drift parameter being a linear function of the (transformed) stress level, a multi-level SSADT plan will degenerate to a simple SSADT plan under many commonly used optimization criteria and some practical constraints. We also show that, under our model assumptions, any SSADT plan with more than two distinct stress levels cannot be optimal. These results are useful for searching for an optimum SSADT plan, since one needs to focus only on simple SSADTs. A numerical example is presented to compare the efficiency of the proposed optimum simple SSADT plans and a SSADT plan proposed by a previous study. In addition, a simulation study is conducted for investigating the efficiency of the proposed SSADT plans when the sample size is small.     

Urea‐Induced Acid Amplification: A New Approach for Metal‐Free Insertion Chemistry

The enhanced catalytic activity of difluoroboronate ureas proved to be essential as an acidity amplifier to promote metal‐free O?H and S?H insertion reactions of α‐aryldiazoacetates in high yield. This methodology was found to be generally applicable to a broad substrate scope and presents a conceptually new approach for organocatalytic diazo insertion reactions. Mechanistic investigations suggest that the reaction pathway involves a urea‐induced protonation of the α‐aryldiazoester.     

Conformational Control of Oligo(p‐phenyleneethynylene)s with Intrinsic Substituent Electronic Effects: Origin of the Twist in Pentiptycene‐Containing Systems

Dependence of the backbone planarity of oligo(p‐phenyleneethynylene)s (OPEs) on the intrinsic electronic character of substituents and on the nature of the solvent has been experimentally demonstrated with a series of center‐symmetrical five‐ring systems, pentiptycene‐pentiptycene‐arene‐pentiptycene‐pentiptycene, differing in the substituents on the central arene. In frozen 2‐methyltetrahydrofuran (MTHF), the adjacent pentiptycene units prefer to be in a mutually twisted orientation when the substituents are electron‐withdrawing (F and amido), resulting in a TPPT or TTTT conformation, whereas a planarized PPPP backbone is favored in the case of electron‐donating substituents (alkyl and alkoxy). The propensity to adopt the PPPP form is generally enhanced by replacing MTHF with either methylcyclohexane or mixed ethanol/methanol as solvent. These observations reveal that the twist between adjacent pentiptycene units in OPEs is a consequence of the electronic rather than steric effects of iptycenyl substituents. The electronic effect of iptycenyl substituents is manifested in decreased phenylene π polarizability as the net effect of both electron‐donating hyperconjugation and an electron‐withdrawing inductive effect. Variable‐temperature electronic absorption and emission spectroscopies are the critical tools for this work. Our findings provide important guidelines for conformational and electronic engineering of OPEs and for the design of novel iptycene‐based organic electronic materials.