Cucurbit[6]uril pseudorotaxanes: distinctive gas-phase dissociation and reactivity

Cucurbit[6]uril forms a doubly charged complex with 1,4-butanediammonium cation that is observed using electrospray ionization Fourier transform mass spectrometry. Such 1:1 complexes are not observed for the smaller cucurbit[5]uril, which forms a 2:1 ammonium:cucurbituril complex instead. The 1:1 complex with cucurbit[6]uril is difficult to fragment via collisional activation; when it does fragment, both breakup of the cucurbituril cage and loss of the amine are observed. Further, the complex reacts with tert-butylamine via slow adduction. In contrast, nonrotaxane analogues (such as doubly charged 2:1 complexes of either protonated 1,4-butanediamine or protonated ethylenediamine with cucurbit[6]uril) fragment via easy loss of the intact amine upon collisional activation and react with tert-butylamine via rapid displacement of the original amine. On the basis of stoichiometry, fragmentation behavior, and reactivity, we conclude that the doubly charged complex of cucurbit[6]uril with 1,4-butanediammonium is a gas-phase pseudorotaxane.     

Optically activated functionalization reactions in Si quantum dots

Using ab initio calculations, we have studied the influence of optical activation on functionalization reactions of silicon quantum dots with unsaturated hydrocarbons. We find that the energy barrier for the replacement of silicon-hydrogen with silicon-carbon bonds is dramatically reduced if the silicon dot is optically excited. These results provide an explanation for recent experiments on optically excited porous silicon. In addition, our calculations point at the existence of an intermediate spin-polarized state formed by the dot and an alkene or alkyne, upon relaxation after absorbing a photon. This state could be detected experimentally, by, for example, electron spin resonance measurements. Based on the results of our calculations as a function of the dot size, varied from 0.8 to 1.5 nm, we propose that light activated reactions could be used to functionalize and size select silicon quantum dots at the same time.     

Studies on intramolecular nh-bridging in aromatic compounds. Part 3 [1–3]

A study was made of the use of calcium oxide as a catalyst at a temperature of 400–700° for the dehy-drocyclization of four primary arylamines: 2-aminobiphenyl, 1-aminotriphenylene (5c) , 2-phenoxyaniline, and N-(2-aminophenyl)pyrrole. Maximal yields of cyclized products isolated were 53% (carbazole), 52% (4H-naphtho[1,4-def]carbazole), 18% (phenoxazine), and 0%, respectively. Comparison is made with reported cyclizations of the corresponding nitro and azido starting materials. In one case, treatment of I-nitrotriphenylene with triethyl phosphite produced mainly diethyl N-(1-triphenylenyl)phosphoramidate (51%). Mono- and hemihydrochlorides of 5c are described. A mechanism for the catalyzed dehydrocy-clization is proposed.     

Highly enantioselective catalytic acyl-pictet-spengler reactions

The enantioselective cyclization of N-acyliminium ions generated in situ from tryptamine is promoted with high enantioselectivity by a new chiral thiourea catalyst. This represents the first successful system for asymmetric catalysis of the Pictet-Spengler reaction.     

Biscarbene-ruthenium complexes in catalysis: novel stereoselective synthesis of (1E,3E)-1,4-disubstituted-1,3-dienes via head-to-head coupling of terminal alkynes and addition of carboxylic acids

The reaction of a variety of alkynes RCtbd1;CH with a variety of carboxylic acids R(1)CO(2)H, in the presence of 5% of RuCl(COD)C(5)Me(5), selectively leads to the dienylesters (1E,3E)-RCH(1)=CH(2)-CH(3)=C(R)(O(2)CR(1)). The reaction also applies to amino acid and dicarboxylic acid derivatives. It is shown that the first step of the reaction consists of the head-to-head alkyne coupling and of the formation of the metallacyclic biscarbene-ruthenium complex isolated for R = Ph and catalyzing the formation of dienylester. D-labeled reactions show that the alkyne protons remain at the alkyne terminal carbon atoms and carboxylic acid protonates the C(1) carbon atom. QM/MM (ONIOM) calculations, supporting a mixed Fischer-Schrock-type biscarbene complex, show that protonation occurs preferentially at the carbene carbon C(1) adjacent to Ru, in the relative cis position with respect to the Ru-Cl bond, to give a mixed C(1)alkyl-C(4)carbene complex in which the C(4) carbene is conjugated with the noncoordinated C(2)=C(3) double bond. This 16-electron intermediate has a weak stabilizing alpha agostic C-H bond. This most stable isomer appears to have a C(4) center more accessible to the nucleophilic addition which accounts for the experimentally observed product.     

Computer-Assisted Solution of Chemical Problems—The Historical Development and the Present State of the Art of a New Discipline of Chemistry

The topic of this article is the development and the present state of the art of computer chemistry, the computer-assisted solution of chemical problems. Initially the problems in computer chemistry were confined to structure elucidation on the basis of spectroscopic data, then programs for synthesis design based on libraries of reaction data for relatively narrow classes of target compounds were developed, and now computer programs for the solution of a great variety of chemical problems are available or are under development. Previously it was an achievement when any solution of a chemical problem could be generated by computer assistance. Today, the main task is the efficient, transparent, and non-arbitrary selection of meaningful results from the immense set of potential solutions—that also may contain innovative proposals. Chemistry has two aspects, constitutional chemistry and stereochemistry, which are interrelated, but still require different approaches. As a result, about twenty years ago, an algebraic model of the logical structure of chemistry was presented that consisted of two parts: the constitution-oriented algebra of be- and r-matrices, and the theory of the stereochemistry of the chemical identity group. New chemical definitions, concepts, and perspectives are characteristic of this logic-oriented model, as well as the direct mathematical representation of chemical processes. This model enables the implementation of formal reaction generators that can produce conceivable solutions to chemical problems—including unprecedented solutions—without detailed empirical chemical information. New formal selection procedures for computer-generated chemical information are also possible through the above model. It is expedient to combine these with interactive methods of selection. In this review, the Munich project is presented and discussed in detail. It encompasses the further development and implementation of the mathematical model of the logical structure of chemistry as well as the experimental verification of the computer-generated results. The article concludes with a review of new reactions, reagents, and reaction mechanisms that have been found with the PC-programs IGOR and RAIN.     

Experimental and theoretical study of the V → T,R relaxation of CD4 between 300 and 100 K

Rate constants for the vibrational deactivation of CD₄ by the collision partners CD₄, He, Ne, Ar, Kr, D₂ and O₂ have been measured using a laser-fluorescence technique. The results are compared with those for the deactivation of CH₄ by the same collision partners and with a modified SSH type theoretical treatment.     

Ferromagnetic resonance investigation of dispersed Ni catalysts: epitaxial and textural effects from the support

Catalysts consisting of dispersed Ni particles supported on silica and alumina, with sizes ranging from 6 to 20 nm, have been studied by ferromagnetic resonance. For the Ni on Al₂O₃ catalyst, a textural promotion effect is shown to be present and it is attributed to the possible presence of NiAl₂O₄. The FMR data confirm the epitaxial growth of Ni on SiO₂ when Ni antigorite is reduced and show that some anisotropy is still present after sintering of the catalyst at about 1200K.     

Structural basis for recognition of bacterial cell wall teichoic acid by pseudo-symmetric SH3b-like repeats of a viral peptidoglycan hydrolase

Endolysins are bacteriophage-encoded peptidoglycan hydrolases targeting the cell wall of host bacteria via their cell wall-binding domains (CBDs). The molecular basis for selective recognition of surface carbohydrate ligands by CBDs remains elusive. Here, we describe, in atomic detail, the interaction between the Listeria phage endolysin domain CBD500 and its cell wall teichoic acid (WTA) ligands. We show that 3′O-acetylated GlcNAc residues integrated into the WTA polymer chain are the key epitope recognized by a CBD binding cavity located at the interface of tandem copies of beta-barrel, pseudo-symmetric SH3b-like repeats. This cavity consists of multiple aromatic residues making extensive interactions with two GlcNAc acetyl groups via hydrogen bonds and van der Waals contacts, while permitting the docking of the diastereomorphic ligands. Our multidisciplinary approach tackled an extremely challenging protein–glycopolymer complex and delineated a previously unknown recognition mechanism by which a phage endolysin specifically recognizes and targets WTA, suggesting an adaptable model for regulation of endolysin specificity.

Combining genetic, biochemical and computational approaches, we elucidated the molecular mechanisms underlying the recognition of Listeria wall teichoic acid by bacteriophage-encoded SH3b repeats.     

Tuning cell adhesion on gradient poly(2-hydroxyethyl methacrylate)-grafted surfaces

A simple yet versatile method was developed to prepare a low-density polymerization initiator gradient, which was combined with surface-initiated atom transfer radical polymerization (ATRP) to produce a well-defined poly(2-hydroxyethyl methacrylate) (HEMA) gradient substrate. A smooth variation in film thickness was measured across the gradient, ranging from 20 A to over 80 A, but we observed a nonmonotonic variation in water contact angle. Fits of X-ray reflectivity profiles suggested that at the low graft density end, the polymer chain structure was in a "mushroom" regime, while the polymer chains at high graft density were in a "brush" regime. It was found that the "mushroom" region of the gradient could be made adhesive to cells by adsorbing adhesion proteins, and cell adhesion could be tuned by controlling the density of the polymer grafts. Fibroblasts were seeded on gradients precoated with fibronectin to test cellular responses to this novel substrate, but it was found that cell adhesion did not follow the expected trend; instead, saturated cell adhesion and spreading was found at the low grafting density region.