X-ray structure of fac-[RuH(1,5-cod)(NH2NMe2)3][PF6]: Stabilization of coordinated substituted hydrazines by hydrogen bonding

The structure of [RuH(cod)(NH₂NMe₂)₃][PF₆] has been solved by X-ray diffraction methods and shows the cation to contain a facial arrangement of N,N-dimethylhydrazine ligands, coordinated via the NH₂ nitrogen atoms, and held together by hydrogen bonds.     

Solid products from thermal decomposition of polyethylene terephthalate: Investigation by CP/MAS 13C-NMR and fourier transform-IR spectroscopy

The solid reaction products from pyrolysis of polyethylene terephthalate in the presence and absence of red phosphorus were characterized by CP/MAS ¹³C-NMR, FR-IR, and MAS ³¹P-NMR spectroscopy. Over the temperature range of 300–400°C, polyethylene terephthalate was converted in a sealed vial to a highly crosslinked polymer of terephthalic acid. Pyrolysis in the presence of red phosphorus, which functions as a flame retardant by increasing the amount of char, yielded an intractible polyaromatic phosphate ester. After thermal cleavage of polyethylene terephthalate with formation of free carboxyl and vinyl ester groups, there are two competing reaction pathways. The smaller molecular weight fragments may enter the vapor phase where they undergo further degradation primarily to CO₂, CO, and acetaldehyde, as described by others. However, if volatilization of the oligomeric fragments is inhibited, an alternate reaction pathway gives rise to the formation of highly crosslinked char. Red phosphorus decreases the volatility of the oligomeric fragments by converting them to phosphates and thereby enhances char formation.     

Assignments of carbon NMR resonances for microcrystalline ubiquitin

Solid-state NMR 2D spectroscopy was used to correlate carbon backbone and side-chain chemical shifts for uniformly (13)C,(15)N-enriched microcrystalline ubiquitin. High applied field strengths, 800 MHz for protons, moderate proton decoupling fields, 80-100 kHz, and high magic angle sample spinning frequencies, 20 kHz, were used to narrow the most of the carbon line widths to 0.5-0.8 ppm. Homonuclear magnetization transfer was effected by matching the proton RF field to the spinning frequency, the so-called dipolar-assisted rotational resonance (DARR) (Takegoshi, K.; Nakamura, S.; Terao, T. Chem. Phys. Lett. 2001, 344, 631-637), and a mixing time of 20 ms was used to maximize the intensity of one-bond transfers between carbon atoms. This polarization transfer sequence resulted in roughly 14% transfer efficiencies for directly bonded carbon pairs and 4% transfer efficiencies for carbons separated by a third carbon. With this simple procedure, the majority of the one-bond correlations was observed with moderate transfer efficiencies, and many two-bond correlations were also observed with weaker intensities. Spin systems could be identified for more than half of the amino acid side chains, and site-specific assignments were readily possible via comparison with 400 MHz (15)N-(13)C-(13)C correlation spectroscopy (described separately).     

Reaction of η5-cyclopentadienylbis(triphenylphosphine)cobalt(I) with alkadiynes. Preparation and reactions of bicyclic cobalt metallocycles and a stable trimethylsilyl-substituted mono-complexed alkadiyne. Comments on the mechanism of cobalt-catalyzed alkyne cooligomerization

Reactions of η⁵-cyclopentadienylbis(triphenylphosphine)cobalt(I) (5) with several 2,n-alkadiynes (2) were investigated. Each of these reactions leads initially to a material in which one of the acetylene functional groups is π-coordinated to cobalt; this complex then undergoes conversion to a metallocycle. In cases where the two acetylene functions are connected by three- and four-carbon bridges (2b, 2c), metallocycles formed by intramolecular reaction of two acetylene functions in the same molecule may be isolated. In cases where the acetylene functions are joined by larger or smaller bridges, the reactions are more complex, and both inter- and intramolecular metallocycles are formed. Reactions of 5 with 1,8-bis(trimethylsilyl)-1,7-octadiyne (16) gives an isolable crystalline mono-acetylene complex (17), this material is stable in the solid state but undergoes conversion to metallocycle (18) in benzene solution. The relationship of these results to the mechanism of the CpCo(CO)₂-catalyzed benzocycloalkene synthesis is discussed; it is suggested that intramolecular metallocycles are intermediates in reactions leading to benzocyclopentanes and -cyclohexenes, but intermolecular metallocycles are probably involved in reactions leading to benzocyclobutenes.     

Synthesis of 2,6-trans-disubstituted 5,6-dihydropyrans from (Z)-1,5-syn-endiols

Certain (Z)-1,5-syn-diols 2 may be converted into 2,6-trans-5,6-dihydropyrans by using phosphonium salt 4 or phosphorane 5 as dehydrating agents. A more general four step procedure converts the (Z)-1,5-syn-endiols into enantiomeric dihydropyrans ent-3 via regioselective silylation of the allylic alcohol unit followed by mesylate formation and base-promoted nucleophilic displacement.     

Cumulative indices for Spectrochima Acta, Part A and Spectrochimica Acta, Part B

This article is an electronic publication in Spectrochimica Acta Electronica (SAE), a section of Spectrochimica Acta, Part B (SAB). The hardcopy text is accompanied by an electronic archive, stored on the SAE homepage at http://www.elsevier.nl/locate/sabe. The archive contains data, index and program files. The main article discusses the bibliographical purpose of the program and data files. A collective index for Spectrochimica Acta for volumes since it was split into Parts A and B, and continuing through 1991 for SAA and 1997 for SAB, is presented in DBF format, along with rudimentary data entry and access software.     

The Neutral Part of the Bark of Pinus Luchuensis Mayer

The neutral part of the acetone extract from the bark of Pinus luchuensis Mayer has been investigated and found to consist of alkanes (C₂₂–C₃₄) and triterpenes of serratene type. The triterpenes are 3β–methoxyserrat–14–en–21–one, serrat–14–en–3, 21–dione, 3β–hydroxyserrat–14–en–21–one, 3β–21α–dimethoxyserrat–l4–ene and 3β–methoxyserrat–14–en–21α–ol.     

An electronic aid for line selection for scanning inductively coupled plasma atomic emission spectrometers

This article is an electronic publication in Spectrochimica Acta Electronica (SAE), the electronic section of Spectrochimica Acta Part B (SAB). Accompanying this hard copy text is a disk containing the program, source flies, data files and a brief manual along with a few programming notes. The main article discusses the purpose of this work, and the Appendix provides brief instruction on the use of the program, manipulation of the data, and source code. An automatic file selection system for the control of a rapid scanning spectrometer performing atomic emission spectrometry has been developed using the PROLOG language. The system can be “taught” the elemental composition of a given sample type. It uses this information (when available) to generate a linear search strategy which minimizes the number of lines that need to be measured. The rules used by the system can be observed during system operation to allow a trace of the logic. Reading of the initial data base takes no more than 6 s and then decisions are made in less than 1 s per line.     

Preparation and photoelectron spectrum of the glycine molecular anion: assignment to a dipole-bound electron species with a high-dipole moment, non-zwitterionic form of the neutral core

We report the gas-phase preparation of negatively charged glycine as well as the Gly(H(2)O)(1,2) (-) complexes by entrainment of the neutral precursor into an ionized supersonic expansion tuned to optimize the (H(2)O)(n) (-)Ar(m) clusters. The photoelectron spectrum of Gly(-) displays the signature of a dipole-bound species, with sufficient vibrational fine structure to characterize the core neutral as a higher energy, non-zwitterionic isomer of the amino acid.     

Structure and Thermodynamics of NaF-AlF(3) Melts with Addition of CaF(2) and MgF(2)

The NaF-AlF(3) system with additions of CaF(2) and MgF(2) has been studied with Raman and vapor pressure measurements for 3 >/= CR (NaF/AlF(3) molar ratio) >/= 1 and up to 50 mol % additive. The results show that the binary melt can be described using the two equilibria AlF(6)(3)(-) = AlF(6)(2)(-) + F(-) and AlF(5)(2)(-) = AlF(4)(-) + F(-) with equilibrium constants 0.25 and 0.05, respectively, at 1293 K. Both reactions have positive reaction enthalpies. The first equilibrium is strongly shifted to the right resulting in a melt mixture with very low AlF(6)(3)(-) concentrations even at the Na(3)AlF(6) composition. Evidence for nonideal mixing of anions was found. For the ternaries, models based on Raman data are presented and compared with vapor pressure measurements. Good agreement is observed when association between the additives, CaF(2) or MgF(2), with the AlF(5)(2)(-) ions in the melt was considered. This association could be experimentally observed through a band broadening and a slight shift in the AlF(5)(2)(-) band frequency. Our vapor pressures and Raman data both indicate that MgF(2) clearly acts as an acid when added to NaF-AlF(3) melts of any composition. When CaF(2) is added, a slight decrease of vapor pressure occurs. Raman data indicate a decrease of AlF(4)(-) concentration, corresponding to a dissociation of CaF(2) with liberation of F(-) ions. All these results are, however, very much dependent on the initial melt composition. These data are explained in terms of acid-base, dilution, and association reactions of the solute with the solvent.